I just ran a "yum update" on my CentOS 5.3 system. After a reboot, I noticed /etc/redhat-release show CentOS 5.4.
I thought yum upgrade was supposed to do that?
I wanted to simply patch my CentOS 5.3 system without turning it into CentOS 5.4 ... YET.
I am an old days RH release user(from 6.x) and just switching back from Debian/Ubuntu to CentOS on some servers, but I can not understand the kernel update strategy currently enabled in CentOS.There are two boxes, with almost identical installation, but recently there was an auto update of kernel on one box. This auto update also seems to issue an auto reboot on the machine, which is unacceptable on server machines.
View 2 Replies View RelatedI have Centos 5.3 on our server When I log-in in webmin I have a message "Warning - Your system is actually running CentOS Linux version 5.3." In the next line I have a button "Update Detected Operating System" My question is Do I need to click the link and update Detected operating system? If I do, is it going to change any configuration on our server?
View 2 Replies View RelatedI have a error when i want to update my system via YUMI execute the next command.sh@ yum -y updateYou could try using --skip-broken to work around the problemYou could try running:package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigestThe program package-cleanup is found in the yum-utils package.
View 5 Replies View Relatedi have problems with my failover machines and cant locate the cause. The last update is quite some time ago.So will it hurt my configuration when I do an yum-update? I have 5 Xen VM on each machine, also they replicate with drbd and heartbeat. Can I just update the dom0 and leave the VM untouched inside?
View 5 Replies View RelatedLast I upgraded one of our cent 5 boxes which is running kvm with a mix of centos and windows VMs.After the update performance just tanked on the XP guest, but the others (including other windows VMs) are just fine.I checked with our good friend google and didn't really get any help there.We're hoping to NOT have to rebuild the XP guest, so I thought I'd check in here first.
This is CentOS release 5.5 (Final) with kernel
2.6.18-194.32.1.el5 #1 SMP (64bit)
i want to know two thinsg about yum update
1) does it overwrite existing configuration files that is will i need to reconfigure every service after running yum update
2) If somebody pushes the reset button or electricity to the system is reset while yum update is running what will happen i think there can be two stages to that
a) if it is still downloading while the electricity to system is reset
b) it is installing while electricity to system is reset
Just checking to be sure. 5.3>5.4 update went without a hitch:) But a message ran about (/etc/yum.repo.d) CentOS-Base.repo.rpmnew. Comparing CentOS-Base.repo with the new one show the 1st has the correct priorities and .rpmnew does not have the correct priorities. Should I remove the *.rpmnew repo after making sure it otherwise is the same as the original CentOS-Base.repo?
View 1 Replies View RelatedAfter some testing for a couple of days, I decided to take the plunge and update all my 5.3 machines. Using the recipe from the release notes:
yum clean all
yum update glibc*
yum update yum* rpm* python*
yum clean all
yum update
shutdown -r now
I updated some guinea pigs that I had physical access to and didn't have any issues. So I remotely updated a small farm of LAMP machines that handle a couple of million page views per day. It took each machine approximately 5-6 minutes to download/install/reboot.
I am having with CentOS5.4 and Pirut?The update system is telling me I have a Pirut update, but when I go to apply it, the system complains about dependency issues with rhn-setup-gnome. I have searched high and low for the solution to this but haven't found it yet.I have found some hacks, but I am hesitant on messing with the integrity of the system just to complete the update.
View 6 Replies View RelatedI've recently upgraded my Lenovo Sl500 laptop from windows vista to windows 7, both 32bit.
Prior to this i had dual boot between CentOs 5.6 and windows vista.
After i have upgraded to windows 7, the dualboot is apparently gone, I am no longer able to boot in linux.
My question is now, how can i fix this, or create a new dual boot?
Im currently left with two partitions, one with Windows 7 installed, and one with CentOs 5.6 installed, but as said, I am unable to acces my linux.
I have some trouble with my hp workstation xw4400 with an ATI FireGL 3300 and the X-Server. There was no problem with the graphical install routine and the graphical boot works fine. But when the system changes into the login-screen, then it results in a black screen and a more or less frozen system.
View 3 Replies View RelatedI've installed Centos 5.0 in my system, and I want to know how to un-install an update or package in Centos via Command Line ?
View 1 Replies View RelatedI have centos 5.3 workin on mini itx atom 330. i have some problem with the network when i use Samba. when i move big files the network goes down. i wanna to install the new kernel on my centos to try to fix the network problem with the new drivers includes on the new kernel.
View 2 Replies View RelatedI have a CentOS server in one of my labs at work that does not have an Internet connection.Is there anyway that I can download the updates on a USB stick and then update the server? If so, what are the procedures?
View 1 Replies View RelatedIs it possible to do an update from fedora to centos without losing everything? in paticular I would like to keep the users and openvpn-as configuration.
View 5 Replies View RelatedI applied the Kernel update that showed in the updater via the GUI.It now won't boot anymore.Memory for crash kernel (0x0 to 0x0) notwithin permissible range.WARNING calibrate_APIC_clock: the APIC timer calibration may be wrong.
View 2 Replies View RelatedI am trying to do a basic install of CentOS 5.4 on my embedded computer. It is a Linutop 2 system with a AMD Geode 800MHz CPU and 512Mb Ram. Have installed an IBM 40Gb 2.5" HD for OS storage. I am doing the install procedure in text mode. Everything goes as planned until I get to the package selection.
1. Booting from (i386) DVD with "linux text" parameter.
2. Skipping media check.
3. Selecting "English" install language.
4. Selecting "DK-latin1" as keyboard layout.
5. Selecting "Remove all partitions and create default layout" and selecting "no" to modifying partition layout.
6. Selecting "yes" to configure "eth0" and mark to enable "IPv4" on boot.
7. Selecting DHCP for IP configuration and Manual host name.
8. Setting time zone to "Europe/Copenhagen".
9. Setting root password to a 16 digit alphanumeric pass-phrase.
10. De-selecting "Desktop - Gnome" (no other entries selected).
When the system is checking for dependencies, an exception
Traceback (most recent call first):
File "/usr/lib/python2.4/site-packages/yum/packageSack.py", line 426, in returnNewestByName
raise PackageSackError, 'No Package Matching %s' % ui_pats
File "/tmp/treedir.22057/instimage/usr/lib/anaconda/yuminstall.py", line 1072, in getBestKernelByArch
pkgs = ayum.pkgSack.returnNewestByName(pkgname)
[Code]...
have all ways been hiding in the background read not say a thinglets start well i look after 2 dell poweredge 2650 with 12 gig ram installed servers has been running fine onwell i though it was time to upgrade to 5 all went fine till reboot Memory for crash kernel (0x to 0x) not within permissible range ! well what i have been reading this is the norm for now What is mean by ignore it? LoLwell so i did the system keeps boot till i get to this linesbin/mingetty: /sbin/mingetty: cannot execute binary file alot, and it shows. INIT: Id "5" respawning too fast: disabled for 5 minutes ...so maybe its a memory issue so took 8 gig out left 4 in the system now it reboot alls good with only 4 gig of ram installed so is there a way to fix it to use all the ram can i get the system boot on 4 gig and then add the 8gig later on
View 7 Replies View RelatedFor portability reasons; I am building a standalone kickstart ISO; based of Cent5.2. I am to the point where I can load my ks file (linux ks=cdrom:/ks.cfg), it reads it fine; and performs the install as I want.
Where I am having a problem; is a good way to have the install use upgraded RPM's, not the base; specifically a kernel with a few needed tweaks in it; which is packaged in an rpm.
I attempted to place my kernel rpm's into the CentOS directory and rerun creatrepo; but I simply managed to corrupt the base repo on the install media.
Is it possible to list/find/compare the program versions on a Centos system, against Redhat/Centos Errata/Security/Bug lists? Sort of looking for a way to make sure that all the packages on a system are ok, and not a security risk-- Without having to update every package. A pseudo code, in my mind is:
[Code]...
I tried to run system-config-kickstart when after full installed CentOS 5.3,it report error as following,does anyone face the same problem?
[root@localhost ~]# system-config-kickstart
Loaded plugins: fastestmirror, kernel-module, priorities, protectbase,
: versionlock
[code]....
I am running a CentOS 5.5 system which does NOT support VT Technology, so I am unable to use Xen HV. I am very happy with OpenVZ other than the fact that it doesn't support Windows, only Linux.I'd like to have VMWare Server 2.x installed, but it appears that OpenVZ changes the Kernel to, in my case, 2.6.18-194.3.1.el5.028stab069.6. The default kernel on my system is 2.6.18-194.3.1.el5.i386.If I change grub to load 2.6.18-194.3.1.el5.i386, VMWare will work but OpenVZ will not. If I change grub to load 2.6.18-194.3.1.el5.028stab069.6, OpenVZ will work, but VMWare will not.If I try to run /usr/bin/vmware-config.pl while in the 2.6.18-194.3.1.el5.028stab069.6 kernel, I get an error of:
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)?Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running kernel?[/usr/ src/ linux/ include]I'm so lost as what to do now..is there anyway I can compile both of the kernels together somehow?
That the Linux bridge configuration does not work afer I upgraded the kernel to 2.6.33.2. Why I can't find the device vmbr0?
[Code]...
I have centos on Microsoft Virtual PC 2007.
yesterday i updated my CentOS 5.4 with command "yum update" and today it won't to start.
Shows processor error and needs to be resetted.
How to solve this issue??
i don't know where to start exactly First i am kinda newbie in Ubuntu. I am working 7 months with Ubuntu and still i have many difficulties. I went through many problems and still i succeed to fix them all What have i done ? Well simply i have tried to update my system with "apt-get". Afterwards i saw a message "0 to install 0 to update 3 not upgraded". These 3 were linux-generic linux-headers-generic and one more. I have done this ... and suddenly i have chanched my kernel to the last version. After rebooting my machine the worst happened - i had no GUI, no graphics at all.
What the real problem is ? The problem is that i am student in IT engineering, where we work only and with Windows OS and ( isn't that funny?) and Windows Servers. However i preffered to use Linux because of the growing popularity of open source OS, because with linux i have more opportunities to learn new stuff and of course because i hate Windows the most . My problem is that i have 4 Virtual Machines in VirtualBox inside my computer.I still can see the files and i still can operate to some level. I have minimal graphic�l interface in "xterm" mode. Yes but i can't operate with them in "xterm" mode and that is so crucial for me. I have projects to make and i am depending of my virtualization. I don't want neither to change my beloved Ubuntu (if is still Ubuntu) and i can't risk to lose any data inside my computer. I will describe the steps i took in the next chapter of the thread
I just started setting up a linux box in the office...I have some experience with ssh commands but not setting up a linux system and stuff.The box is connected to our network but I have no clue how to make windows & osx talk with it. How can I go by doing that and also setting up an apache server to be able to connect through network. Right now I have apache/linux/mysql running it works when i go to localhost, but I would also like to let all the computers in office to access it. I would guess that will deal with virtual host which I know how to setup. I just need to setup an IP.
View 19 Replies View RelatedToday, I try to update firefox by Package Updater but show error by bellow. "Missing Dependency: xulrunner >= 1.9.0.19-1 is needed by package firefox-3.0.19-1.el5.centos.x86_64 (CentOS5updates)"
View 6 Replies View RelatedOn two Centos5 servers, yum gives a segmentation fault error when trying 'yum update' or 'yum check-update' after running 'yum clean' :
[Code]....
The error is the same for the other computer except while attempting to update the rpmforge repository. Nothing has really changed on the servers in some time and 'yum update' worked fine on each yesterday and I have no idea why they would both suddenly fail!
For some reason, when I do a yum check-update I get a list of no changed packages to install. If I follow this immediately with a yum update then it tries to install drbd83. I've tried a yum clean all and repeated the commands and get the same thing. This happens on both the machines that are set up to use DRBD. Just seems weird and I don't understand. Anyone got an explanation?
[root@here]# yum check-update
Loaded plugins: changelog, downloadonly, fastestmirror, priorities, protectbase,
: security
Loading mirror speeds from cached hostfile
* epel: www.mirrorservice.org
* base: mirror.sov.uk.goscomb.net
[Code]...