Is there a bluefish rpm that I can install on Centos 5.5 64 ? I did find some on the bluefish web site but all had a bunch of dependency issues..... had no clue where to find them.... yumex showed nothing.
View 6 Repliesi install bluefish editor [URL] by terminal and i install successfully. tell me from where i can run this editor.
View 3 Replies View Relatedi'm running Linux Suse 11.2 with Gnome 2.28 and i want to install a php, html and css editor but i don't know which one to use or how to go about installing it on linux Is there any tutuorials or guides on installing software on linux suse 11.2 and which editor would you recommend?
View 9 Replies View RelatedHow I can install Cinelerra or what command can do it. Because I cann't compile sources, which i had got.
View 2 Replies View RelatedWarning: Do not edit /etc/sudoers directly with an editor; Errors in syntax can cause annoyances (like rendering the root account unusable). You must use the visudo command to edit /etc/sudoers. In the previous section we added your user to the "wheel" group. To give users in the wheel group full root privileges when they precede a command with "sudo", uncomment the following line:
%wheelALL=(ALL) ALL
so i signed in as root and typed in visudo now i alreayd made the changes but how do i exit and save super+x doesnt seem to do it for me since im not using nano and not supposed to cause it causes errors
I want to create a movie using some pictures and a some mp3 files. Does anyone knows a movie editor with gui for linux because i never created a movie before?
View 2 Replies View RelatedFor example, when I want to have an identical line to the above line, I must press "yy" and then P (or p). Could somebody give me the list of such commands.
View 6 Replies View RelatedI'm running opensuse 11.2 KDE 64bit. I tried to install bluefish editor and it can't find it. I've installed in on many other distros. How do I install it in opensuse?
View 7 Replies View RelatedI want to make a program for my website but I don't know how to make work.
View 1 Replies View RelatedBluefish version 1.0.7 is in the repositories - but I want to try version 2, which seems much better according to the website.Has anyone succeeded in loading this? I have tried following the instructions in bluefish.openoffice.nl and I get errors in the "make".
View 2 Replies View Relatedway to auto open the "Source Code" of a Firefox page, into Bluefish, rather than the text viewer that comes up default?
View 3 Replies View RelatedOn windows I really only used Notepad++ as my text editor, it had two features that I loved.What I need to accomplish is what I would do with Notepad++ column editor.I could have like 100 lines, and place the cursor at a column, and goto edit>column editor, and I could insert an incrementing number. (I could also pad the incrementing number with 0s, this was GREAT for making batch files among other things.)So each line at that column had a number higher than the previous line.The other feature that I used sometimes was a search/replace with regex patterns.Does anyone know of an editor that has those features for linux? I am mostly after the column editor insert feature but if you know of one with both features that would rock.
View 1 Replies View RelatedBluefish seems to crash whenever I drag the side window all the way to the left. I'm using it on windows 7 mostly just curious to see if this also happens on Linux and maybe what could be causing it. That's the error message I get This application has caused Runtime to quit in an unusual way
View 2 Replies View RelatedI'm using Bluefish on my laptop to modify files on my desktop web server. The machines are networked with samba. Every time I save the files, I'm prompted with this window that says: File has been modified by another process. It gives me the option to cancel or overwrite. It's the only program that does this. I can click on overwrite and that works, but it's pretty annoying.
View 1 Replies View RelatedHow default editor can be changed in redhat linux to different editor.
View 4 Replies View RelatedTrying to install Centos 5.2.i386 from DVD in text install (I'm assuming I need to do text install as I'm setting up raid arrays)
I have 4x150Gb raptors where I want the following layout:
/dev/sda/
/dev/sda1 100Mb (for /boot in raid 1, 4 disks)
/dev/sda2 1000Mb (for swap, raid 0, 4 disks)
/dev/sda3 4000Mb (for /, raid 5, 4 disks)
[Code].....
In the last attempt I did, sdb,sdc and sdd all had the correct ordering of partitions, but sda looked like above, which means I would need to assemble by boot array partition array as /dev/md0 = /dev/sda3, /dev/sdb1, dev/sdc1, dev/sdd1
Why is the partition numbering moving around as I create them?
I'm using Fedora 9, I've just installed Bluefish, all hunky dory till I press "View on Browser" Button nothing happens. I've tried few cods like these; /usr/bin/firefox -new-window "%s" & %s. But No success.
View 2 Replies View Relatedi am using Simplymepis8.5 i just installed BLUEFISH from synaptic package to run my php script over it..but i am facing some problem as:
--->though i am able to create a a file as root using kdesu commandbut the problem is "view in browser" button not working,then i searched on website and found one solution to set the entry of firefox in edit-->preference-->external programs set it as Firefox %s but still it aint working,what changes should i have to made? --->then i click on EXTERNALS-->mozilla its links to firefox but with the address [URL]but it worked after editing the address to [URL]
The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.
View 3 Replies View RelatedMy problem is that I'm trying to install CentOS 5.4 x86_64 DVD ISO on Supermicro X7SBI server with installed Adaptec RAID 3405 controller.
I created RAID 5 array and is working fine (adaptec status says Optimal) but I can't install CentOS to that array (1.5TB size).
Whenever I try to install with: linux dd
I'm asked for a driver, which I have downloaded from Adaptec site and extracted contents to USB drive (in installation found as /sba1) which has now a lot of IMG and some ISO files on it.
I try to load (I simplified names) RHEL5.img, CENTOS.img... with x64 names (one exact name: aacraid driverdisk-CentOS-x86_64.img) and I always get the error message: "No devices of the appropriate type were found on this driver disk"
This is going on for a week now and I can't find the right driver or something I'm doing wrong to get install done.
I am trying to install CentOS-DS on version 5.4 x86_64. I cannot get to the Extras repo due to lack of wired Internet access. I have wireless (except to server) and I have big UFD drives.
View 1 Replies View RelatedI need your help urgently. I will shortly install Centos 5 on a HP DL380R05 E5420 Server with two HP 146GB 10k 2.5 SAS HP SP hard disks running hardware RAID-1. I am a newbie on CentOS, please advise me:
1. Do I need a Centos RAID device driver for hardware RAID-1 on the HP DL380R05 E5420 Server?
2. Should I use Centos i386 or Centos x86_64 in this case? Which one: CentOS 5.2 or CentOS 5.3?
3. Does Centos support Embedded NC373i Multifunction Gigabit network cards?
The following is my server's hardware configuration:
HP DL380R05 E5420 2GB Base AP Server(1) Quad-Core Intel Xeon Processor E5420 Two Embedded NC373i Multifunction Gigabit / 2 GB (2 x 1 GB) PC2-5300 Fully Buffered DIMMs (DDR2-667)/HP Smart Array P400/256MB Controller /Rack (2U)/Hot Plug Fully Redundant Fans Standard Two HP 146GB 10k 2.5 SAS HP SP HDD HP 1000W IEC C14 Cord RPS Kit
I want to install CentOS from netinstall CD, but it doesn't work for wireless connection, because it just looks up for eth0 connection. Well, I connected server to wired USB connection and it's named eth1. I want to use netinstall CD but using eth1 connection. Is there any way for doing it?
View 2 Replies View RelatedI am having new hardware and IDE driver for that hardware as drive disk image (it8213_centos53.img). CentOS 5.3 installation is working fine with drive disk image at USB and CentOS 5.3 at DVD. Our application uses CentOS 5.3 and we build a custom kick-start ISO for installations. Using that ISO client is going to install on all hardware boxes.
Note while installing :
a) No network connection is avalible.
b) No USB isavalible.
c) No floppy is avalible.
d) Only single CD-ROM is avalible.
So, is it possible to build single custom kick-start CentOS 5.3 ISO which contains dirve disk image and entire installation will be done using that image. If so please let me know the steps to build it.
Error installing mod_ssl on centos 5.7. Do not install the mod_ssl module says there is a package conflict, some way to fix it?. is a 64-bit
[Code]...
I've been trying to install the Fuppes media server onto CentOS and have had a few difficulties. I had to do a build from the source (svn build 578), then configure, make and make install. So far so good.Once I try to run fuppes, I get the error:[ERROR] Failed to bind socket to : 8.15.7.107:0.The documentation I've searched so far suggests that there is a config file that needs to be set with the appropriate ip address, but the file doesn't exist as the program hasn't started up yet!
View 1 Replies View RelatedI've Got one Problem with My Computer soon after success installation of when the boot-loader ask me to choose OS at CENTOS 5.4, multi boot boot-loader if i choose windows then computer tries to boot windows but fail and give the error message that there is a problem on reading the hard disk, But when i restart it and start with LINUX then computer start successful with no error message, now i do not know what to do cause i need to use Windows and all my programs are in windows..
View 1 Replies View RelatedI'm trying to install CentOS 5.5 on an old Pentium 4 desktop PC I have, which is not being used for much other than being a MTA, and I want to migrate this functionality onto the CentOS platform for stability (Windows is a perpetual nightmare. I partitioned a spare 20GB to experiment with, and I want to install CentOS into here to play around with first so I can move my files around between Windows and CentOS, until I'm happy all of the stuff is gone, then I can scrub the Windows partition and claim the space for CentOS.
So, I've downloaded and burned the DVD and tried to install. I start the install with no args from the main install menu, and the process goes through some probing and then comes up with the "Welcome to CentOS" menu. I go through this, and then it tries to start X Server. It fails, and falls back to text mode. I get the "Welcome to CentOS" screen again, and then proceed through it. I set my keyboard layout to UK, then this message comes up at the bottom of the screen:
"_X11TransSocketINETConnect() can't get address for localhost:6001: Temporary failure in name resolution"
then on the next line: "Cannot open display :1" If I force the install to text, by typing "linux text" at the first menu, I get about the same way through, but the install just hangs doing nothing, and no disc access to the install disc.
I've noticed this happen with every CentOS installation I've done in the past and it's confusing me. On the software template screen select, I always select "Server" and leave the extras option unchecked, I also check "Customise now". The only things I choose are the editors (to get vi), Web server and server configuration tools (and this time also Java). I didn't select any GUI programs, yet it still installs things like X, GNOME components and also samba. Why does it do that? There no way they're needed for dependencies. Is there something I'm missing when selecting the software components? Why does it still install samba when I didn't select it from under "Servers" components? Or have I misunderstood what software selection does and it installs all those components regardless but doesn't automatically turn the services on?
View 5 Replies View RelatedI have been running CentOS 5 as my primary desktop for about 6 months now, and have been very pleased with it. Since I work as a hardware designer most of the tools I need only provide support for RHEL, and I have found these tools (once you hack the installer anyway) generally work very, very well indeed on CentOS.
I recently bought a new computer and I thought I'd share my experiences of installing CentOS 5.2 on it. Here's the specs - Core i7 920, 12Gig DDR3, Radeon 4780, Gigabyte EX58-UD4. The first issue I encountered was a very early boot crash. This was a known problem with the onboard Gig-E chipset and I eventually found the solution on your wiki site. Using a separate network card I was able to install the new kernel module and it now works great. I believe this is now sorted in 5.3.
Next up was a problem with the Radeon card I think - after installing the ATI driver (proprietary), X would come up with a white screen and the computer would lock up. Going back to VESA would get me going again, but frankly I can't stand X without video acceleration. This turned out to be a problem with "RHGB" (not the first time I've had problems with this to be honest). Disabling it in the grub command line sorted that out.
The next problem was the performance of the harddisk - I was only getting a few MB read/write speed out of it according to hdparm. This seriously slowed down the PC. To fix that I had to enable AHCI in the bios which got things running much better - about 55 MB/sec.
The last problem was with the virtualization. I run VirtualBox with a windows instance and it kept crashing every time I booted it (I'd copied it across from my old workstation). This was because of FlexLM drivers used for USB dongle based licenses. Now, these will only work if you enable the VT extensions on the processor. I thought I had - the VM certainly had it enabled and so had the bios. Going through the VirtualBox log's it seemed like they were being detected but not enabled. From what I understand, VT-x was enabled, but the BIOS is supposed to also set up some form of locking mechanism or these virtual machines wont use it. It seems this wasn't done properly with the BIOS revision supplied with the motherboard (F2). Upgrading to the latest BIOS got it working properly.
My only outstanding issues now aren't really CentOS related - enabling AHCI has stopped my (proper, dual boot) Windows installation from working. At the moment I have to disable it in the BIOS before booting Windows - no big problem as I don't do that often (I maybe need to reinstall it). The other issue is GRUB wont work with my USB keyboard even though the BIOS seems happy enough with it. Odd in that the same keyboard worked fine with GRUB on my old workstation.
Finally, a couple of general remarks about using CentOS - it's never crashed on me and I do thrash the thing at times when I'm doing hardware synthesis or P&R! Base software is a bit limited, but adding some external repos (RPMForge and EPEL in particular) generally sorts that out. The only thing I (personally) miss is a more up-to-date version of mono.