Software :: Installing The Video Editor Cinelerra?
Feb 18, 2010How I can install Cinelerra or what command can do it. Because I cann't compile sources, which i had got.
View 2 RepliesHow I can install Cinelerra or what command can do it. Because I cann't compile sources, which i had got.
View 2 RepliesNew installation of Suse 11.3, with a new build of the git repository Cinelerra-CV 4.1 from the [URL] web site instructions.Loaded a 5 second mpg file into Cinelerra, and then tried to play it back in both the viewer and the main window. It does decode the video and play it back, however, the playback speed is not smooth. It jumps, in what look like 1 second intervals, and then it gets really slow towards the end of the playback. By jumps, I mean that it is like the speed of playback is on a curve with bumps on each second. Since this is a new installtion of Cinelerra, it could be some settings that are off, as it has been some time since using Cinelerra.For comparison, the same mpg file plays back fine in Kdenlive, although Kdenlive uses a much smaller playback screen...but it is nice and smooth in terms of playback speed. It also plays fine in Banshee.I did take a look at the Cinelerra html manual, and there was a section on system adjustments that you can make...although I would like to find out what is causing it, and if it is a feature of the Cinelerra build?
View 2 Replies View RelatedI've installed Ubuntu 10.10 on my harddrive and want to install Cinelerra (CV). I'd followed the steps on there website, but it doesn't seem to work for me. Since they haven't upgraded there version to 10.10, you are stuck with all the old dependencies. I needed to install: libcinelerra. Searched it, but this libary needed libx264-85, which I cannot find in Synaptic. Probably because it is and 10.04 libary. I do have libx264-9x.
View 4 Replies View RelatedI have been messing around with Cinelerra after doing a Final cut pro course some time ago but as it needs to be told what to do more i am finding it hard going. When I have track 1 that has audio and video and also track two has the same then i mute the audio in one and block out the video in then other. Then add effects. It is then moving audio or video around and nothing is in sync anymore. Not where i put things. I undo the effect to see if it will go back but no go. I try to undo to the point where maybe i missed something but nope that is not it. Inevitably i have to redo everything again but then i end up with the whole thing out of sync again. I had a previous install of Ubuntu and Cinelerra and i don't remember striking this problem. Am i not loading the tracks properly. I don't have a good work flow with this and i know i should try something more simple but i am impatient to edit videos i have had for years and years and years. I never did learn editing in windows so i am happy to be getting somewhere in Linux.
View 2 Replies View RelatedI think about editing and compressing some avi files and want to install cinelerra-cv. However there are some dependency problems it seems...
aptitude install cinelerra-cv cinelerra-doc cinelerra-cv-data
The following NEW packages will be installed:
cinelerra-cv cinelerra-cv-data cinelerra-doc libavcore0{a} libavutil50{a} libfaac0{a} libmjpegtools-1.9{a} libmp3lame0{a} libmpeg3-1{a} libmpeg3hv-1.5.0-1{a} libquicktime1{a} libquicktimehv-1.6.0-1{a} libva-x11-1{a} libva1{a} libx264-112{a} libxvidcore4{a} mpeg3-utils{a} ttf-bitstream-vera{a}
The following packages will be upgraded: libavcodec52 libpostproc51 libswscale0 3 packages upgraded, 18 newly installed, 0 to remove and 5 not upgraded. Need to get 16.5 MB of archives. After unpacking 31.5 MB will be used. The following packages have unmet dependencies: libavformat52: Depends: libavcodec52 (< 4:0.5.2-99) but 5:0.6.1+svn20101128-0.2 is to be installed. or libavcodec-extra-52 (< 4:0.5.2-99) which is a virtual package. The following actions will resolve these dependencies:
[code]....
Normally I say yes and hope for good, but this time... I do not use adobe flash player, but I would still like to watch ..... videos. Would be hard without gnash, right? I use iron portable and iceweasel. Also I use totem a lot, but aptitude seems not being able to resolve this inconsistency automatically. My question is: what would happen, if I just say "y"? gnash is completly away? And is there any way to install newer version of gnash or do whatever to have everything working?
When I try to install Cinelerra I get this error:
Local file conflict between packages
Two packages provide the same file. This is usually due to mixing packages from different software sources.
Test Transaction Errors: file /usr/bin/mpeg3cat from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with file from package libmpeg3-utils-1.8-3.fc12.x86_64
file /usr/bin/mpeg3dump from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with
file from package libmpeg3-utils-1.8-3.fc12.x86_64
file /usr/bin/mpeg3toc from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with
file from package libmpeg3-utils-1.8-3.fc12.x86_64
I have tried installing cinelerra with autoplus and even doing it by hand. Both ways I get "No package cinelerra available" errors.
From Autoplus:
Code:
Checking programs Completed,Now Running Choice Menu...
Loaded plugins: langpacks, presto, refresh-packagekit
atrpms | 3.5 kB 00:00
Setting up Install Process
No package cinelerra available.
Error: Nothing to do
I also followed the installation instructions from the AutoPlus website and got the same result. I looked at the ATrpm website and all I found was cinelerra-2.1-21_git20101021.src.rpm, Am I doing something wrong, or is there another way to install cinelerra?
Anyone know how to get sound during the editing session of Cinelerra? Any ideas out there?
Looks like no sound in rendered file either! So no sound at all with Cinelerra....
p.s. I have sound working fine with all of my other programs. And working with same files on Kdenlive, Kino or Pitivi, all give me sound no problem. Running a basic Karmic Ubuntu Studio 32bit setup.
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
I need to edit a 720p MKV video. and pitivi and openshot seem to crash on me every now and then. In your opinion what is the best video editor for ubuntu.
View 4 Replies View Relatedneeding a good video editor ?
View 8 Replies View RelatedI recorded someone using a VCR (tape) camcorder-it was all I had available. I've now recorded/transfered the tape to DVD format, so it's now digital instead of analog. I want to edit the file and separate it into smaller files. What's a good program to use?
View 6 Replies View Relatedis there any video editor for opensuse11.3?
View 9 Replies View RelatedIs there hdv video editor for Linux(Ubuntu)?
View 1 Replies View RelatedI was sticking to openSUSE 11.2 for as long as I could because I had good functionality and such. I always used OpenShot video editor without hardly any problems. Eventually, being as I am using a new 64-bit system now, I HAD to upgrade the OS to 11.4 to get decent full-screen flash playback. I'm not new or really bad at video editing.
But I do like simple things because I already have enough stress outside of computers in my life. So using OpenShot was very nice because it is simple, basic, and functional; and gets the job done just fine. I just now went to openSUSE 11.4 and OpenShot crashes on load everytime, even after reboot. I would say I know more about computers than 90% of [morons] but there is no way I will ever figure this out.
Any repositories with the openshot video editor. -installing it from source?
View 2 Replies View RelatedInstalled pitivi. It takes 20 minutes to put a 3-minute clip on the timeline and the sound is totally messed up. Installed lives, it loads the clip but insists there is no audio plus the black on dark gray menus are almost unreadable. Installed kdenlive, it loads the clip but playback produces a short squawk then crash, and I gather I'd have to risk destroying my sound by uninstalling pulseaudio. Someone suggested OpenShot.
Followed the instructions there:
Installed Open Movie Editor, it won't even read the clip. Now, Movie Player handles that clip (a VOB file from a DVD I had made from a miniDVB tape) perfectly as long as I don't touch the time slidebar, so I would imagine if there were a usable video editor out there something would work.
This was an ia32libs problem, now fixed in latest updates. I tried to remove and purge and reinstall through terminal. No success. PITIVI is installed but when I click on the launcher in the applications menu nothing happens.
View 6 Replies View RelatedIs there a video editor that also allows me to edit the audio. For example I have 2 videos and want to take the audio from one clip and add it to the other clip. I have tried Avidemux and Pitivi but these don't seem to have this ability.
View 9 Replies View RelatedWhat's a simple way of downloading and installing LIVES video editing software on Ubuntu 11.04? I just simply can't understand the technical stuff on the website about pps and all that. Is there a simple apt-get install script or something similar?
View 7 Replies View RelatedGNU video editor for windows platform?
View 1 Replies View Relatedi have used many Hex Editors in windows, almost all had comparison features, even notepad++ to an extent could do this. I have 2 binary files, i just want to compare the differences easily and graphically, in windows HexWorkshop did this with the click of a button. I have tried 5-6 editors from the ubuntu repos but none have this option
2) Is there any desktop video capturing software that are more catered for tutorials etc where the whole desktop is captured. (Camtasia for windows i know it a massive bit of kit, but thats the sort of software im on about)
I have tried recordMyDesktop, XVidCap and a few others. However, they capture XServer and therefore things like desktop effects arent recorded. I have used VLCs screen capture which to be honest is better than the other 2 software i mentioned for recording the whole screen, but options are very limited.
Found a weird issue with Openshot video editor ( Gnome, squeeze amd64 ) version 1.1.3-1 ( stable ) but it also applies after upgrading to version 1.3.0-1.1 ( from sid ).
After starting Openshot there are icons ( and tabs ) missing on the toolbar :
After hovering my mouse-pointer :
After ( in menu ) : View > uncheck Toolbar and again View > check Toolbar :
Choosing another gtk-style in gnome-appearance-properties : Theme > Customize... > Controls seems to solve it. I've checked different Controls, some have the same problem and others don't.....
Is anyone using the video editor Openshot?
OpenShot Video Editor
I have played around a bit with the Open Shot Video Editor and just download Kdenlive. I am trying to teach myself how to create and edit videos by inserting music, transitions, etc. However, I want to add special effects such as fireworks, explosions, get text to light up, blur, etc, and add sparkle type effects. I know Open Shot won't do this and it does not look likve Kdenlive will either. Trying to find something that will jazz my videos and almost give them a semi professional quality to them. Is there any other Open Source video editor type program that can do special effects like what I am looking for?
View 2 Replies View RelatedI have been trying to get Cinelerra, but keep getting errors like bash and stuff like that. Is there a good substitute video editor that is on par with Cinelerra? I had it before and like it, and would like something that is as straight forward to use as that.
View 2 Replies View RelatedI wanted to create a really cool intro on openshot, but when i clicked: new animated title, i clicked glare and it showed me this exact message:
Blender, the free open source 3D content creation suite is required for this action [url].
Please check the preferences in OpenShot and be sure the Blender executable is correct. This setting should be the path of the 'blender' executable on your computer. Also, please be sure that it is pointing to Blender version 2.5 or greater.
Blender Path:
blender
Version Detected:
2.49
I've tried Linux video editors like Kdenlive and OpenShot, but their text editors for adding text are funky and not very user-friendly.Do any Linux video editors have and easy text editor like MS MovieMaker has?
View 4 Replies View RelatedI've got some video clips that were shot with an incorrect white balance, which I'd like to correct. Having read that LiVES has color FX, I thought I'd give it a try.
The documentation for LiVES [URL] shows a "colour correction" effect that I don't see anywhere on my copy of LiVES 1.1.5. My digging so far hasn't found a plug-in that does color correction.
I installed it using the ppa instructions here [URL] The terminal says this when I try to run the program:
tshipp@Harold:~$ openshot
--------------------------------
OpenShot (version 1.1.2)
--------------------------------
*** ERROR: MLT Python bindings failed to import ***
[code]....