CentOS 5 :: Glxgears Crash After Upgrade From 5.2 To 5.4
Oct 25, 2009
My exercise below is to check if glxgears crashes xorg of CentOS5.4 with Intel GM965 Chipset. Apparently I don't have luck in this case. Since the exercise failed, it means I will still stick to CentOS 5.2 (residing on a different partition) for a while, even though CentOS5.2 crashes glxgears too. After "yum upgrade" (done after moving all repos in /etc/yum.repos.d to elsewhere except CentOS-Base.repo and CentOS-Media.repo), I ran glxgears that consistently crashes CentOS5.2 xorg, an issue that upset me quite a bit.
During upgrade, I saw a line "grubby fatal error : unable to find a suitable template". I guess the my grub.conf is too confusing for the installer, but that is not big deal, I just used the kernel number 2.6.18-164 where it is applicable. Even this this new update, glxgears still crash the xorg (the screen froze and then a new login screen reappears). With this I am sure the 3D application might still crash the xorg from time to time. (I can still revert to CentOS5.2 with a tar file, but I am still thinking to just upgrade to Centos5.3 but I don't know how.)
[Code]...
View 7 Replies
ADVERTISEMENT
Mar 30, 2011
I have some trouble with my hp workstation xw4400 with an ATI FireGL 3300 and the X-Server. There was no problem with the graphical install routine and the graphical boot works fine. But when the system changes into the login-screen, then it results in a black screen and a more or less frozen system.
View 3 Replies
View Related
Jun 10, 2010
I have this problem since upgrade to lucid.
Every time I start my computer, from the power button, it crash after 6 minutes. It only could be recovered from the reset button, not CTRL + ALT + DEL nor REISUB.
I think it only happens if I don't touch anything in that 6 minutes.
syslog show this during crash:
Code:
Jun 10 07:46:21 antonio-desktop kernel: imklog 4.2.0, log source = /proc/kmsg started.
Jun 10 07:46:21 antonio-desktop rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="725" x-info="http://www.rsyslog.com"] (re)start
Jun 10 07:46:21 antonio-desktop rsyslogd: rsyslogd's groupid changed to 102
[Code].....
View 5 Replies
View Related
Nov 24, 2010
So I did an update to my slackware current and as many people here found that KDE crashes... Mine I am unable to find a fix for it.... I get the following error as I log in...
Warning Can not Open ConsoleKit Session Unable To Open Session: Failed To Connect to Socket: /var/run/dbus/system_bus_socket: No Such File or Directory.
View 14 Replies
View Related
Jan 9, 2011
I have just upgraded KDE to 4.5 but after reboot and login i can't see my desktop. Only cursor, blank screen, and a window says:
Plasma Workspaces - The KDE Crash Handler We are sorry, Plasma Workspaces closed unexpectedly. You can help us improve KDE software by reporting this error
Details: Executable: KDEinit4 PID:3787 Signal: 8 (Floating Point Exception)
My PC:
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+
GeForce 6100 nForce 405
openSUSE 11.3 32-bit
Using nVidia driver.
View 9 Replies
View Related
Oct 12, 2010
I've upgraded my 10.04 (64bits) into 10.10 (64bits) on sunday and since I can't get thunderbird working anymore, I get the following error :
LoadPlugin: failed to initialize shared library /usr/lib/mozilla/plugins/nppdf.so [/usr/lib/mozilla/plugins/nppdf.so: wrong ELF class: ELFCLASS32]
Inconsistency detected by ld.so: dl-open.c: 612: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed!
It seems nspluginwrapper has similar issues...
I've seens there has been similar problems with skype but downgrading to ia32-libs_2.7ubuntu26_amd64.deb didn't fix the problem.
View 1 Replies
View Related
Oct 30, 2010
I've been using Ubuntu since Feisty Fawn, so I've been around the block when it comes to upgrades. From 9.10 to 10.04 I did a clean install, but I decided to try my luck with a web upgrade to 10.10. Well, so far it looks like that was a bad idea. I can't stay in gdm for more than about 1.5 mins before it crashes and drops me back to the greeter. Honestly, I'm not sure exactly what's crashing, but I'll append what logs I think will give some info.
[Code]....
View 3 Replies
View Related
Dec 4, 2010
Just tried to upgrade my mythbuntu box from lucid to maverick.
It crashed during the upgrade. On re-boot it now stops at a dialog telling me its running in low graphics mode because it cannot load/find the nvidia drivers. I am unable to close the dialog. No mouse, no keyboard.
ESC will not let me interrupt the boot to get to a recovery console.
View 9 Replies
View Related
Apr 29, 2011
Both programs were working just fine yesterday before the upgrade to Ubuntu 11.04.
Opening Gimp results in many error pop-ups on being unable to locate module gimp and module gimpfu. I tried to uninstall and reinstall, and the installation fails with this message:
The following packages have unmet dependencies:
gimp : Depends: libgimp2.0 (<= 2.6.11-z) but 2.7.3-2010072701~ll is to be installed Depends: gimp-data (<= 2.6.11-z) but 2.7.3-2010072701~ll is to be installed
This may be because of times in the past where I tried to compile Gimp. Do I need to clean up my repositories list? (in that case, any way to get a fresh one?)
Inkscape doesn't open at all, instead the terminal message says this:
inkscape: error while loading shared libraries: libwpg-0.1.so.1: cannot open shared object file: No such file or directory
I'm not sure what's wrong in the case of Inkscape though, although I did compile a few versions long ago I was using the "normal" version from the Ubuntu repositories afterwards.
View 2 Replies
View Related
Aug 7, 2011
After upgrade KDE to 4.7, I restarted system, when login, the klasma-desktop always crash. can't start.See, below picture:https://picasaweb.google.com/lh/phot...eat=directlinkAnd got below info:
Code:
Application: Plasma Desktop Shell (kdeinit4), signal: Segmentation fault
[KCrash Handler]
[code]....
View 2 Replies
View Related
May 1, 2010
Was running the upgrade through the manager this morning and the download got about 3/4 of the way and froze up making the system unresponsive I left this for an hour to see if it would resolve its self but no luck so as the installation hadn't begun I hit the power button. BIG mistake now when I try boot to 9.10 it hits a black screen with white ubuntu logo much like 9.10 but no loading bar. it just hangs at this now. I am currently posting this from a live usb I made from an ISO of 10.4 i downloaded on my girl friends windows machine. Is it possible to either fix the 9.10 installation or update the files on the 9.10 installation to 10.4 from the live disk(I have the option to make a 9.10 live disk if needed)?
View 4 Replies
View Related
Oct 30, 2010
Today I was prompted to upgrade to Ubuntu 9.1, and then again to 10.04
Doing these upgrades wreaked havoc on my system. I have been able to fix most of the problems that were caused but I am having trouble finding information on the following:
When I boot up the system and after passing the GRUB loader, the system freezes up at the login screen and I have to power down.
If I hit ESC at the GRUB screen and choose Kernel 2.6.32-25-generic (recovery mode) and then choose "failsafe graphic mode", then I am able to log in to GNOME as normal.
View 1 Replies
View Related
Dec 8, 2010
I just tried to upgrade my server to the latest version of Bind9 and the process fails gets frozen.First note that I have Bind in a chroot jail.When I try the upgrade, or the recommended "dpkg --configure -a", it displays this then hangs:Quote:
Setting up bind9 (1:9.7.0.dfsg.P1-1ubuntu0.1) ...
* Stopping domain name service... bind9 rndc: connection to remote host closed
[code]....
View 2 Replies
View Related
Apr 7, 2011
I have a Dell studio running ubuntu for two years now. I had ubuntu 10.04, but a few days ago, the update manager started to bug me that some stuff don't work properly and that I need to to a partial upgrade. I postponed that for a while, and all worked fine, but I finally had sometime and clicked "yes", all began collapsing:
1) the update manager crashed while updating.
2) I rebooted and ran it again. same crash at the same stage.
3) I decided, god knows why, to do a full upgrade to 10.10, which also crasehd.
Now it won't even boot. It always get stuck at a line saying "no IPv6 routers present" or something of that sort. when I switch off manually the wireless switch on the laptop, the boot gets stuck a bit earlier, on a line that says: "laptop login:"
EDIT: I just remembered something which might be important: I had a hibernation problem on the upgrade to 10.04, so I played around a bit with that. now it uses libgcrypt, and I remember I set up something manually then, but I can't remember what.
View 3 Replies
View Related
May 8, 2011
I was upgrading my laptop from 10.10 to 11.04. The laptop crashed part way through the upgrade (fairly far in, at least an hour after downloads completed, a few minutes after grub installer asked some questions). The crash was from another issue besides the update
Now when the computer boots it immediately goes into kernal panic (black screen, flashing caps lock light). when selecting recovery mode, it boots for about a 5 seconds then hangs.
I can however at grub select Previous versions of ubuntu > 2.6.35-28 and it will boot succesffully and run without error. Currently running like this to post this message. For the most part everything looks as if it has upgraded. To things worth mentioning.
Code:
$ sudo do-release-upgrade
Checking for a new ubuntu release
No new release found
[code]....
I backed up my home folder just in case but didn't do a system backup. Wasn't worried if I broke it and had to reinstall, but this doesn't look in my (possibly incorrect) to bad.
View 4 Replies
View Related
May 16, 2011
I just upgraded to ubuntu 11.04 and the evolution mail crashed and I lost most of my e mail files can I get them restored in any way?
View 2 Replies
View Related
Aug 17, 2011
Yesterday, while upgrading from Ubuntu 10.04 to 11.04, the computer crashed. For this reason, when I reboot, Ubuntu doesn't recognize any longer the root folder and so on... and halts execution in a blank screen (well before the login screen).I'm currently running LiveCD and I can see the Filesystem with the root folder, the bin folder, home folder and so on....My question is How can I access the files I had in my desktop from LiveCD? I know the user and password so how can I access it?
View 4 Replies
View Related
Feb 23, 2010
I can't update Firefox, and it crash allot when I use You tube.
I don't know why!
Version:
Quote:
Terminal:
Quote:
View 8 Replies
View Related
Dec 6, 2010
I've a Toshiba M40-282, with an ati mobility x700. I tried Ubuntu and now Fedora and I'm having the same problem..The pc is fast in anything except videos (like megavideo)..running glxgears the pc starts slowing down as when i watch videos. What can I do? try another distribution? try something else?
View 9 Replies
View Related
Feb 22, 2010
When I run glxgears I get the following message:
Code: dave@dave-laptop:~$ glxgears
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 16
Current serial number in output stream: 16
I guess this is indicative of an underlying problem with X11. However, I have no idea how to solve this or, indeed, where to start.
View 3 Replies
View Related
Feb 7, 2016
I am on debian jessie. I ran "apt-get update && apt-get upgrade" and midway through the upgrade my computer suddenly rebooted.
I wasn't paying close attention to the upgrade process so I didnt see if there was any error messages right before the reboot. The laptop was plugged in, fully charged and I've never had issues with overheating.
When I boot now I get to a shell with a message that says:
Code: Select allWelcome to emergency mode. After logging in type "journalctl -xb" to view system logs, "systemctl reboot" to reboot, "systemctl default" to try again to boot into default mode.
If I try "systemctl default" there's a message that simply says "Hangup", nothing else happens.
Looking through "journalctl -xb" I see this:
Code: Select allFailed to insert module 'autofs4'
Failed to open /dev/autofs: No such file or directory
Failed to initialize automounter: No such file or directory
Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
Failed to start Load Kernel Modules.
If I retry "apt-get upgrade" it says:
Code: Select alldpkg was interrupted, you must maually run dpkg --configure -a to correct the problem
If I run "dpkg --configure -a" stops at the package cups-browsed with message saying "Hangup"
Output of a few commands I saw in another forum thread:
$ lsmod
Code: Select allModule Size Used by
ext4 473802 1
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 82522 1 ext4
[Code] ....
Is this fixable without jumping through too many hoops or should I just reinstall the system? I need the computer for work so Im not gonna spend days trying to fix it without reinstalling.
View 2 Replies
View Related
Jun 15, 2010
The following is my system:
AMD Athlon II x4 620 2.6Ghz
4GB DDR2-800 DC
Radeon HD 5770 1gb
Ubuntu 10.4 LTS, latest proprietary drivers.
On GLXGears, I only get 12k fps. This seems very low, especially considering the fact that my Acer Aspire One laptop gets 1-5k scores on a POS Intel GMA 950.
View 1 Replies
View Related
Feb 14, 2011
I just upgraded my graphics card to something faster... (well as fast as you can go with only PCI-X slots)
I noticed when in OpenBox glxgears get's about 1300 FPS and the HELI-X simulator about 40 FPS.
But if in compiz I get 400 FPS in glxgears and 6 FPS in HELI-X.
Is there something I've configured wrong? Why would compiz FPS go down so much, should glxgears be about the same?
View 5 Replies
View Related
Nov 19, 2010
I have hp laptop 6910p and giving issue with glxgears.
Code:
init@ntagil-it:~$ glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
[code]....
View 6 Replies
View Related
May 7, 2010
When running Matlab (7.10.0.499 (R2010a), 64-bit (glnxa64)) on CentOS 5.4 using vnc, the Xvnc chrashes and this is logged in syslog:
# grep vnc /var/log/messages
May 5 15:37:47 hornsund kernel: Xvnc[7195] general protection rip:594c79 rsp:7fffa0085318 error:0
May 6 12:30:43 hornsund kernel: Xvnc[7003] general protection rip:594c79
[Code].....
CentOS is up to date as of beginning this week. Doing a quick net check suggests HW-problem ( HP DL380 G6), but I've tested both memory and cpu(s) without errors. We also had the same problem on Scientific Linux 5.4.
View 1 Replies
View Related
Sep 22, 2015
I have just upgraded to Jessie and everything seems to be OK apart from printing from a windows machine to my print share. This was working previously under wheezy. I can print a test page from Cups without any problems, but when I try and print from windows, Samba seems to crash completely and is constantly writing these messages to the logs. Then I lose access to the other shares, presumably while it repeatedly crashes.
STATUS=daemon 'smbd' finished starting up and ready to serve connectionsPANIC: assert failed at ../source3/printing/printing.c(486): pjob->jobid == jobid
[2015/09/22 12:02:03.989596, 0] ../source3/lib/util.c:785(smb_panic_s3)
PANIC (pid 3704): assert failed: pjob->jobid == jobid
[2015/09/22 12:02:03.991930, 0] ../source3/lib/util.c:896(log_stack_trace)
BACKTRACE: 27 stack frames:
[Code] ....
View 0 Replies
View Related
Aug 13, 2011
I just installed Debian Squeeze a couple days ago and haven't had any problems so far except trying to get 3D acceleration to work with my Radeon 5770 card. When running glxgears, I get over 900 FPS and the gears are spinning great. When I try to run a 3D game like OpenArena, ScorchedEarth, or FlightGear, they are all so slow as to be unplayable. (extremely slow)
I've been trying to get this working for a while and had no luck.As per internet advice, I installed firmware-linux-free and firmware-linux-nonfree.
In glxinfo, it says "direct rendering: yes"
In my /var/log/Xorg.0.log file it says:
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): Acceleration disabled
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
View 3 Replies
View Related
Nov 25, 2010
I want to compare glxgears graphics benchmarks whit other computers.
Code:
~]$ lspci
02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200] (rev a2)
Code:
~]$ uname -a
Linux ***** 2.6.35.6-48.fc14.x86_64 #1 SMP Fri Oct 22 15:36:08 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
nvidia-settings @ kmod-nvidia
[Code]....
View 6 Replies
View Related
Nov 22, 2010
When i checked last time couple months back glx gears gave me 1400 frames around now i get
Code:
glxgears
Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate.
21 frames in 6.6 seconds = 3.160 FPS
2 frames in 5.6 seconds = 0.359 FPS
84 frames in 5.8 seconds = 14.362 FPS
149 frames in 5.0 seconds = 29.724 FPS
300 frames in 5.0 seconds = 59.814 FPS
and everything is running slow im wondering where the problem might be?
code....
View 11 Replies
View Related
Jul 3, 2009
I am using CentOS5.2 and gnome 2.16, sometimes (not very often) when I open something and close it by clicking the CROSS on the top-right corner. The application crash and I lose all control (no keyboard anymore), I have to reboot the system by reset the machine. What's going on?
Yesterday, when I logon as root and run service setup, after I uncheck a sevice in the list and then start it, I click the CROSS on the top-right corner of the window, it popup a window (in the background) to ask me to save it or not, but then I total lose the control, no mouse, no keyboard. I try to reset the machine many times, but everytime when I repeat the same operation, it crash again. Seems that if I don't close it, everything would be fine!!!!
View 17 Replies
View Related
