Ubuntu Installation :: 10.04 Upgrade On Bind In Chroot Crash?
Dec 8, 2010
I just tried to upgrade my server to the latest version of Bind9 and the process fails gets frozen.First note that I have Bind in a chroot jail.When I try the upgrade, or the recommended "dpkg --configure -a", it displays this then hangs:Quote:
Setting up bind9 (1:9.7.0.dfsg.P1-1ubuntu0.1) ...
* Stopping domain name service... bind9 rndc: connection to remote host closed
[code]....
View 2 Replies
ADVERTISEMENT
Jul 12, 2011
recently we decided to make our own panel (like Plesk or cPanel) but for Ubuntu and it will be licenced under GPL (like any other professional sofware).want to make a panel not only that fits our needs but also the needs of other system administrators and domain owners. We researched other panels and found out that non of them has security/look/ease of use in one package. Bad codig is another problem found in other panels.I made a short overwiev of what I think we have to have in the beginning.I Security :1. Completely chroot enviornoment where every single service is in chroot mode (bind,mysql, postfix, .... )2. Easily managed IPtables trough web-based interface. 3. Coding rules has to be strict.
II Software selection :
1. MTA - Postfix
2. POP - dovecot
[code]....
View 7 Replies
View Related
Jul 8, 2011
what is bind vs bind-chroot vs caching-nameserver ?what is the different between eatch others ?
View 7 Replies
View Related
Dec 15, 2010
I have been a BSD guy for years, but I am now shifting over to CentOS for my first server build.
So far so good, all has been relatively painless and in fact a heck of a lot simpler than I anticipated!
Everything seems to have gone ok except a small problem with Bind. At some point during setup, I accidentally ran "yum remove bind-chroot".
When I tried to run "yum install bind-chroot" I got told "No package bind-chroot available" which was odd.
Anyway, I managed to find the rpm for bind-chroot and installed it that way. Now I see that there is a bind update available
Unfortunately the rpm I installed now has a dependency for the current version of bind which I can see being a headache everytime bind needs updating.
So, can anyone help me get back bind-chroot the proper way? code...
View 4 Replies
View Related
Mar 31, 2011
Today I saw that there was an update available for my LAMP server that involved BIND.
So after I ran an apt-get upgrade i got the following big stack of messages ending sadly with error and I cannot upgade the of "fix" the system after that. Any Ideas? code...
View 5 Replies
View Related
Oct 12, 2010
I've upgraded my 10.04 (64bits) into 10.10 (64bits) on sunday and since I can't get thunderbird working anymore, I get the following error :
LoadPlugin: failed to initialize shared library /usr/lib/mozilla/plugins/nppdf.so [/usr/lib/mozilla/plugins/nppdf.so: wrong ELF class: ELFCLASS32]
Inconsistency detected by ld.so: dl-open.c: 612: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed!
It seems nspluginwrapper has similar issues...
I've seens there has been similar problems with skype but downgrading to ia32-libs_2.7ubuntu26_amd64.deb didn't fix the problem.
View 1 Replies
View Related
Oct 30, 2010
I've been using Ubuntu since Feisty Fawn, so I've been around the block when it comes to upgrades. From 9.10 to 10.04 I did a clean install, but I decided to try my luck with a web upgrade to 10.10. Well, so far it looks like that was a bad idea. I can't stay in gdm for more than about 1.5 mins before it crashes and drops me back to the greeter. Honestly, I'm not sure exactly what's crashing, but I'll append what logs I think will give some info.
[Code]....
View 3 Replies
View Related
Dec 4, 2010
Just tried to upgrade my mythbuntu box from lucid to maverick.
It crashed during the upgrade. On re-boot it now stops at a dialog telling me its running in low graphics mode because it cannot load/find the nvidia drivers. I am unable to close the dialog. No mouse, no keyboard.
ESC will not let me interrupt the boot to get to a recovery console.
View 9 Replies
View Related
May 1, 2010
Was running the upgrade through the manager this morning and the download got about 3/4 of the way and froze up making the system unresponsive I left this for an hour to see if it would resolve its self but no luck so as the installation hadn't begun I hit the power button. BIG mistake now when I try boot to 9.10 it hits a black screen with white ubuntu logo much like 9.10 but no loading bar. it just hangs at this now. I am currently posting this from a live usb I made from an ISO of 10.4 i downloaded on my girl friends windows machine. Is it possible to either fix the 9.10 installation or update the files on the 9.10 installation to 10.4 from the live disk(I have the option to make a 9.10 live disk if needed)?
View 4 Replies
View Related
Oct 30, 2010
Today I was prompted to upgrade to Ubuntu 9.1, and then again to 10.04
Doing these upgrades wreaked havoc on my system. I have been able to fix most of the problems that were caused but I am having trouble finding information on the following:
When I boot up the system and after passing the GRUB loader, the system freezes up at the login screen and I have to power down.
If I hit ESC at the GRUB screen and choose Kernel 2.6.32-25-generic (recovery mode) and then choose "failsafe graphic mode", then I am able to log in to GNOME as normal.
View 1 Replies
View Related
Apr 7, 2011
I have a Dell studio running ubuntu for two years now. I had ubuntu 10.04, but a few days ago, the update manager started to bug me that some stuff don't work properly and that I need to to a partial upgrade. I postponed that for a while, and all worked fine, but I finally had sometime and clicked "yes", all began collapsing:
1) the update manager crashed while updating.
2) I rebooted and ran it again. same crash at the same stage.
3) I decided, god knows why, to do a full upgrade to 10.10, which also crasehd.
Now it won't even boot. It always get stuck at a line saying "no IPv6 routers present" or something of that sort. when I switch off manually the wireless switch on the laptop, the boot gets stuck a bit earlier, on a line that says: "laptop login:"
EDIT: I just remembered something which might be important: I had a hibernation problem on the upgrade to 10.04, so I played around a bit with that. now it uses libgcrypt, and I remember I set up something manually then, but I can't remember what.
View 3 Replies
View Related
May 8, 2011
I was upgrading my laptop from 10.10 to 11.04. The laptop crashed part way through the upgrade (fairly far in, at least an hour after downloads completed, a few minutes after grub installer asked some questions). The crash was from another issue besides the update
Now when the computer boots it immediately goes into kernal panic (black screen, flashing caps lock light). when selecting recovery mode, it boots for about a 5 seconds then hangs.
I can however at grub select Previous versions of ubuntu > 2.6.35-28 and it will boot succesffully and run without error. Currently running like this to post this message. For the most part everything looks as if it has upgraded. To things worth mentioning.
Code:
$ sudo do-release-upgrade
Checking for a new ubuntu release
No new release found
[code]....
I backed up my home folder just in case but didn't do a system backup. Wasn't worried if I broke it and had to reinstall, but this doesn't look in my (possibly incorrect) to bad.
View 4 Replies
View Related
Apr 28, 2011
Today I upgraded my 10.10 to 11.04. Since the last step of upgrading, when it was restarted, I get stucked in consola where it is checking, and there is written fail at stopping automatic crash report generation. How can I repair it. I tried to do
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo reboot
but it doesn't do it properly.
View 8 Replies
View Related
Jul 8, 2009
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
Here's what I see:
Code:
[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]
So, no error message. Logs read as follows:
Code:
Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
[code]....
View 4 Replies
View Related
Feb 5, 2011
I just upgraded from FC 13 to FC 14. I run an ssh server on a port in the 3000s (call it 3xxx, to protect the innocent). When I try to start sshd with the "Port 3xxx" option in sshd_conf, I get the following error in /var/log/secure
sshd[5104]: error: Bind to port 3xxx on 0.0.0.0 failed: Permission denied.
sshd[5104]: error: Bind to port 3xxx on : : failed: Permission denied.
I did not use to have this problem in FC 13. how I can give sshd the necessary permissions now?
View 2 Replies
View Related
Jun 10, 2010
I have this problem since upgrade to lucid.
Every time I start my computer, from the power button, it crash after 6 minutes. It only could be recovered from the reset button, not CTRL + ALT + DEL nor REISUB.
I think it only happens if I don't touch anything in that 6 minutes.
syslog show this during crash:
Code:
Jun 10 07:46:21 antonio-desktop kernel: imklog 4.2.0, log source = /proc/kmsg started.
Jun 10 07:46:21 antonio-desktop rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="725" x-info="http://www.rsyslog.com"] (re)start
Jun 10 07:46:21 antonio-desktop rsyslogd: rsyslogd's groupid changed to 102
[Code].....
View 5 Replies
View Related
Apr 29, 2011
Both programs were working just fine yesterday before the upgrade to Ubuntu 11.04.
Opening Gimp results in many error pop-ups on being unable to locate module gimp and module gimpfu. I tried to uninstall and reinstall, and the installation fails with this message:
The following packages have unmet dependencies:
gimp : Depends: libgimp2.0 (<= 2.6.11-z) but 2.7.3-2010072701~ll is to be installed Depends: gimp-data (<= 2.6.11-z) but 2.7.3-2010072701~ll is to be installed
This may be because of times in the past where I tried to compile Gimp. Do I need to clean up my repositories list? (in that case, any way to get a fresh one?)
Inkscape doesn't open at all, instead the terminal message says this:
inkscape: error while loading shared libraries: libwpg-0.1.so.1: cannot open shared object file: No such file or directory
I'm not sure what's wrong in the case of Inkscape though, although I did compile a few versions long ago I was using the "normal" version from the Ubuntu repositories afterwards.
View 2 Replies
View Related
May 16, 2011
I just upgraded to ubuntu 11.04 and the evolution mail crashed and I lost most of my e mail files can I get them restored in any way?
View 2 Replies
View Related
Aug 17, 2011
Yesterday, while upgrading from Ubuntu 10.04 to 11.04, the computer crashed. For this reason, when I reboot, Ubuntu doesn't recognize any longer the root folder and so on... and halts execution in a blank screen (well before the login screen).I'm currently running LiveCD and I can see the Filesystem with the root folder, the bin folder, home folder and so on....My question is How can I access the files I had in my desktop from LiveCD? I know the user and password so how can I access it?
View 4 Replies
View Related
Feb 23, 2010
I can't update Firefox, and it crash allot when I use You tube.
I don't know why!
Version:
Quote:
Terminal:
Quote:
View 8 Replies
View Related
Nov 24, 2010
So I did an update to my slackware current and as many people here found that KDE crashes... Mine I am unable to find a fix for it.... I get the following error as I log in...
Warning Can not Open ConsoleKit Session Unable To Open Session: Failed To Connect to Socket: /var/run/dbus/system_bus_socket: No Such File or Directory.
View 14 Replies
View Related
Oct 25, 2009
My exercise below is to check if glxgears crashes xorg of CentOS5.4 with Intel GM965 Chipset. Apparently I don't have luck in this case. Since the exercise failed, it means I will still stick to CentOS 5.2 (residing on a different partition) for a while, even though CentOS5.2 crashes glxgears too. After "yum upgrade" (done after moving all repos in /etc/yum.repos.d to elsewhere except CentOS-Base.repo and CentOS-Media.repo), I ran glxgears that consistently crashes CentOS5.2 xorg, an issue that upset me quite a bit.
During upgrade, I saw a line "grubby fatal error : unable to find a suitable template". I guess the my grub.conf is too confusing for the installer, but that is not big deal, I just used the kernel number 2.6.18-164 where it is applicable. Even this this new update, glxgears still crash the xorg (the screen froze and then a new login screen reappears). With this I am sure the 3D application might still crash the xorg from time to time. (I can still revert to CentOS5.2 with a tar file, but I am still thinking to just upgrade to Centos5.3 but I don't know how.)
[Code]...
View 7 Replies
View Related
Sep 3, 2009
I am configuring bind9 on fedora 9(sulphur).I have configured /etc/named.conf and created zone file in /var/named/I have started the service but when I am executing the command nslookup mydomain.com it is not able to resolve the name.Another problem I am facing when I do telnet localhost 53,I am able to connect.but when I do telnet myip 53 it does not connect.Seems to be a firewall problem but I ve disabled iptables selinux completely even I ve disabled dnsmasq but still not working.
View 1 Replies
View Related
Jun 2, 2010
Recently I messed up GRUB boot loader in my laptop installed with Ubuntu which resulted in grub rescue prompt. So I had to boot Ubuntu Live CD to get it fixed. Thought of blogging it, may be useful for some one.
This fix involves two steps. First one is to chroot into Ubuntu installation partition. Second one is to install the grub MBR (Master Boot Record). I am using Ubuntu Lucid 10.04 and Live CD also of same.
Continue reading here: http://karuppuswamy.com/wordpress/20...rescue-prompt/
View 1 Replies
View Related
Dec 20, 2010
I installed Ubuntu Netbook Edition 10.10 on my Eee PC 901 (the one that has 2 SSD's). It all went fine, and I ran the update manager straight after install and config. It installed the updates (all 198 of them!) without error. I was prompted to restart, so I did. I got the error "udevadm trigger is not permitted while udev is unconfigured". I found out that this error is well documented, and I followed the guide at [url](apparently it affects all variants, not just UNE).
It went O.K., until I tried the command "sudo chroot /media/newroot". I got the error that "cannot run command '/bind/bash': no such file or directory". What should I do?
I cannot boot into and earlier kernel (problem/current one is 2.6.35-23-generic) I can only fix it via live USB stick.
View 7 Replies
View Related
Jan 9, 2011
I have just upgraded KDE to 4.5 but after reboot and login i can't see my desktop. Only cursor, blank screen, and a window says:
Plasma Workspaces - The KDE Crash Handler We are sorry, Plasma Workspaces closed unexpectedly. You can help us improve KDE software by reporting this error
Details: Executable: KDEinit4 PID:3787 Signal: 8 (Floating Point Exception)
My PC:
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+
GeForce 6100 nForce 405
openSUSE 11.3 32-bit
Using nVidia driver.
View 9 Replies
View Related
Feb 20, 2010
I updated my lucid alpha testing (64 bit)install after which I am unable to boot into any of my Ubuntu installs(sda11 has a dedicated Burg partition and sda10 has the stable karmic (32 bit)install and sda9 has the testing lucid install) Now I am trying to recover (rewrite Burg or at least grub2 on the MBR) my installs
This is what happens
custom@custom:~$ sudo mount /dev/sda10 /mnt
custom@custom:~$ sudo mount -o bind /dev /mnt/dev
custom@custom:~$ chroot/mnt
[code]....
i tried a slightly different code with little success
custom@custom:~$ sudo mount /dev/sda10 /mnt
mount: /dev/sda10 already mounted or /mnt busy
mount: according to mtab, /dev/sda10 is already mounted on /mnt
[code]....
I also ran a whereis for bash and it also is there
View 9 Replies
View Related
Aug 7, 2011
After upgrade KDE to 4.7, I restarted system, when login, the klasma-desktop always crash. can't start.See, below picture:https://picasaweb.google.com/lh/phot...eat=directlinkAnd got below info:
Code:
Application: Plasma Desktop Shell (kdeinit4), signal: Segmentation fault
[KCrash Handler]
[code]....
View 2 Replies
View Related
Feb 7, 2016
I am on debian jessie. I ran "apt-get update && apt-get upgrade" and midway through the upgrade my computer suddenly rebooted.
I wasn't paying close attention to the upgrade process so I didnt see if there was any error messages right before the reboot. The laptop was plugged in, fully charged and I've never had issues with overheating.
When I boot now I get to a shell with a message that says:
Code: Select allWelcome to emergency mode. After logging in type "journalctl -xb" to view system logs, "systemctl reboot" to reboot, "systemctl default" to try again to boot into default mode.
If I try "systemctl default" there's a message that simply says "Hangup", nothing else happens.
Looking through "journalctl -xb" I see this:
Code: Select allFailed to insert module 'autofs4'
Failed to open /dev/autofs: No such file or directory
Failed to initialize automounter: No such file or directory
Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
Failed to start Load Kernel Modules.
If I retry "apt-get upgrade" it says:
Code: Select alldpkg was interrupted, you must maually run dpkg --configure -a to correct the problem
If I run "dpkg --configure -a" stops at the package cups-browsed with message saying "Hangup"
Output of a few commands I saw in another forum thread:
$ lsmod
Code: Select allModule Size Used by
ext4 473802 1
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 82522 1 ext4
[Code] ....
Is this fixable without jumping through too many hoops or should I just reinstall the system? I need the computer for work so Im not gonna spend days trying to fix it without reinstalling.
View 2 Replies
View Related
Sep 22, 2015
I have just upgraded to Jessie and everything seems to be OK apart from printing from a windows machine to my print share. This was working previously under wheezy. I can print a test page from Cups without any problems, but when I try and print from windows, Samba seems to crash completely and is constantly writing these messages to the logs. Then I lose access to the other shares, presumably while it repeatedly crashes.
STATUS=daemon 'smbd' finished starting up and ready to serve connectionsPANIC: assert failed at ../source3/printing/printing.c(486): pjob->jobid == jobid
[2015/09/22 12:02:03.989596, 0] ../source3/lib/util.c:785(smb_panic_s3)
PANIC (pid 3704): assert failed: pjob->jobid == jobid
[2015/09/22 12:02:03.991930, 0] ../source3/lib/util.c:896(log_stack_trace)
BACKTRACE: 27 stack frames:
[Code] ....
View 0 Replies
View Related
