I've just installed latest verion of centos and am having trouble getting Apache to work or even knowing how to test it's working.
When I open up firefox and type 'http://localhost/' I am getting the message "failed to connect" firefox can't establish a connection to server localhost.
Has anyone successfully kickstarted a rhel/fedora/centos over HTTPS ? In other words, is it possible to do the rhel/fedora/centos install from running apache with SSL enabled?
View 1 Replies View RelatedI am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
i opened up my browser to surf the web and a page popped up i had never seen before.Apache 2 Test page powered by centos. Any address i put into my firefox browser won't come up and i'm stuck on this test page and,i can't locate it on my computer to remove it.How do i get rid of it and more importantly how did it get on my computer in the first place?
View 10 Replies View RelatedI am trying to run php as cgi script with apache and opensuse 11.3. I disabled the mod_php and installed mod_fcgid, and php-fastcgi, as per the instructions here. I have been trying to achieve this, but, somehow it is now working. I can see the page if i have an index.html, but if i have index.php, it downloads it as a file. I really tried to set this thing up for more than 12 hrs now. I am soo frustated.
my /etc/apache2/vhosts.d/shekhar.conf
my /srv/www/wrapper/shekhar/php5
my /etc/apache2/conf.d/mod_fcgid.conf (I uncommented the lines inside the <FilesMatch > Tag., it gave me same result, even after uncommenting the tag.)
my /etc/apache2/httpd.conf
When I run the ps -efH command to list out all the process, I can see Apache running as root and seems to have sub-processes running as www-data. Here's the excerpt:
root 30117 1 0 09:10 ? 00:00:00 /usr/sbin/apache2 -k start
www-data 30119 30117 0 09:10 ? 00:00:00 /usr/sbin/apache2 -k start
www-data 30120 30117 0 09:10 ? 00:00:00 /usr/sbin/apache2 -k start
[code]....
I'm looking to run some R scripts on a mysql database (engine =csv) from the apache webserver.
The goal is to record some statistics/numbers while someone is logged in, pass those numbers to r, run some statistics algorithms on the passed set of data and output an image file back to the logged-in user's html web page.
Doing this along with knowledge on how to call general r functions from within a php framework would be great.
I have recently ported from Windows to Linux (xubuntu) I am a developer, i installed everything i need, LAMP. Now in Windows i used to turn off all unnecessary Services, i don't need the Apache or MySQL service running all the time. I used: net start mysql
Whenever i needed it. How do i do the same in Linux:
1. Disabling not-needed daemons from auto-starting?
2. Starting them only when i need them?
I'm attempting to get svn over apache running on maverick server. Here is my site config
Code:
<VirtualHost *:80>
ServerName common.subversion.xxx.xxx
ServerAdmin xxxxxxx
DocumentRoot /var/www/SVN
AddExternalAuth pwauth /usr/sbin/pwauth
SetExternalAuthMethod pwauth pipe
[Code]...
While the redhat posts indicated selinux, when I checked it with sestatus (after first installing sestatus), it came back disabled. So what is locking down the /var/www directory?
I have a single CentOS server with two separate NIC's. I was asked to install an internal Wiki on Apache but have that dedicated to one NIC so it's internal only. Then have just a site running on Apache on the 2nd NIC which is externally accessible. I have never done anything like this and would like tonow how difficult this would be on a single stand alone server that I have above?
View 1 Replies View Relatedif you are running Apache on a firewall system, perhaps to display a web front end for firewall configuration, how would you make sure that it is accessible only from inside the local network?
View 1 Replies View RelatedI have run the apache service on my machine. Many people are accessing that server. Now, I want to know who all connected to my system. How can I get that information?
View 1 Replies View RelatedWhen I do " ps aux | grep apache " I can see that apache2 is running. But when I do the same thing for http or httpd there is nothing. I looked for this question in the forums but couldn't find it. I probably don't know just what to look for.I'm using the new Debian Squeeze, and was fooling around heavily with new software installations and modifications, and just noticed all of a sudden that I couldn't get on the internet - so I know I did something but don't know what.I can plug in a thumb drive with a bitnami joomla stack on it and run, " ~/tmp/joomla-1.6.0-0/./ctlscript.sh start "and that gets things going for the joomla stuff (apache, http, mysql, php), but that stuff is pretty self contained and does not effect the browser's attempt to reach the web.
View 12 Replies View RelatedI just did a fresh install of ubuntu 9.10 and install apache2 webserver with php5 and mysql, but for some reason I have no idea why but when upload files to the computer running apache2 webserver
http://69.242.228.170/ is the link to the ubuntu system It's not displaying the website correctly and it's not working on any pc on my network either, but it looks fine in dreamweaver when I was designing it on my laptop. list of all the files and folders in the /var/www path
Code:
root@requiem:/var/www# ls -lh
total 92K
-rwxr-xr-x 1 root root 446 2010-02-25 18:27 bg.gif
-rwxr-xr-x 1 root root 2.3K 2010-02-25 18:27 contact.php
-rwxr-xr-x 1 root root 143 2010-02-25 18:27 content_bg.gif
[Code]...
i have apache and mysql running, i can access my web server by visiting localhost on port 80 but for some reason when it doesnt work when i try using my ISP provided IP address... (it used to work).. i have my router setup with a DMZ on my LAN IP (my computers IP, this is the computer in my home network that serving with apache).. i also cant seem to shut down my mysql server (theres an update ive been trying to get) even when i use sudo...
View 5 Replies View RelatedI'm trying to modify an existing user so that any files they create can be at least read (although writing and execution would be nice) by any other user. The reason is because I need the daemon running my Apache server to be able to access files created by a daemon running under this user, files which will be created and accessed in real-time.
View 3 Replies View RelatedOk, so I have a few web apps that need to run shell commands. Heres a great example of one:
Code:
This is a PHP script getting my system volume. Herein lies the problem... www-data doesn't have permission to do this!
I changed my apache config to use MY account as the web user, and it does in fact work the way I want it to.
Obviously, I dont want to leave apache running as me, and want it to keep using www-data.... heres my question... how can I give permission for www-data to execute certain programs?
I set up my first web server and it works flawlessly -when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.
I have two network interfaces on my server, eth0 (public static IP connected to internet directly) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1. It is connected directly to the internet and serves as a SNAT for other comps on the lan.I added "192.168.1.1 www_server_com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.HOwever, the server itself only opens website if the address islhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www_server_com ( I cant use dots as I do not have more than 15 posts on the forum )Here is the firewall script I am using.
#!/bin/sh
#
# Example Firewall Script
[code]...
I just installed apache2 on my VPS (running Debian 5 (lenny)). Problem is that when i start apache2 nothing happens.
Code:
ps ax |grep apache
and
Code:
ps ax |grep httpd
returns only the grep process itself, and
[Code]....
I configure my apache and can run http://localhost. There "I see it works!" but if I try to stop apache I get message that httpd is not started. I run
apachectl start - ok
but when I run apachectl stop it says "httpd (no pid file) not running"
I need to stop apache, because this is my dev machine and I want to start apache only when I make changes to my site. I am with slackware13.
I am running Apache 2.2.3 on a CentOS release 5.3 (Final) with 100 Sites. I've notice that Apache is making my server Swap around 200 MBs.
"http://www.xxx.yyy.zzz/server-status" doesn't show me too much to, so I am looking the behavior of specific httpd process.
ProcessID "18753" is the one for "http://www.xxx.yyy.zzz/server-status" in my browser.
This command show me (In KBs) how much virtual memory is that specific process using:
# /etc/init.d/httpd start
# grep Private_Dirty /proc/18753/smaps | awk '{ print $2 }' | xargs ruby -e 'puts ARGV.inject { |i, j| i.to_i + j.to_i }'
3012
... Running this command a lot of times it gives me the same output, but suddenly...
# grep Private_Dirty /proc/18753/smaps | awk '{ print $2 }' | xargs ruby -e 'puts ARGV.inject { |i, j| i.to_i + j.to_i }'
21708
Something make that process (and all the others httpd process too) to use a lot more memory!
Part of my httpd.conf:
# Timeout 120
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 3
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 100
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule> #
My server is running Mysql 5.1.34, vsftpd 2.0.5, BIND 9.3.4-P1 (as slave). I couldn't found anything running in the specific time that httpd processes start to use that much memory.
I trashed my Karmic Ubuntu install and installed Lucid (I had heard that the boot times were much reduced and I didn't see any improvement in my normal upgrade). I reinstalled Drupal but find that my installation of Apache does not run the scripts, but rather passes the php text file to the browser. IIRC when I installed it apt configured Apache correctly without me having to edit .htaccess or /etc/apache2/httpd.conf which makes me think that I am missing a key dependency.
Does anyone know of a check list to which I can refer to make sure that I've installed everything? My installation has Postgres instead of MySQL. Failing which, in the event that my memory is faulty, where can I find which changes need to be applied to the configuration files above?
OS: Ubuntu Server x64 10.04 Apache: 2.2.14-5ubuntu8.4 I have a virtual server which has been running for months with no problems then one day I saw that it crashed and I had to power cycle it. Since then I have been unable to start Apache as it segfaults no matter options I give it. Before I try to reinstall Apache, why is this segfaulting?
Code:
execve("/usr/sbin/apache2", ["/usr/sbin/apache2"], [/* 21 vars */]) = 0
brk(0) = 0x7f9f48f8d000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9f47e0d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
[Code]...
I'm trying to get Apache to run in a user's home directory. I changed the conf file so that Apache runs under the user and group "kiosk" and changed the DocumentRoot and Directory from the default to "/home/kiosk". Then I set Apache to start at boot (chkconfig --level 235 httpd on) and rebooted. When I checked, httpd is running as kiosk like it should (ps aux | grep httpd). However, when I try wget localhost, I get a 403 response back. If as root I call "httpd -k stop" and then "httpd -k start", then everything works exactly as it should (curiously, if I try using "-k restart", it still doesn't work). After this, httpd still shows as running as kiosk and if I check before calling start, it shows no httpd processes running as expected.
This only happens when I use httpd to stop and then start the web server. If I try to restart using apachectl I still get a 403 error. As an interesting aside, after I've used httpd, if I try using "apachectl restart" I get a "(13)Permission denied: Error retrieving pid file run/httpd.pid" error. This is all on a freshly installed CentOS 5.5 server. Why I'm seeing this very different behaviour from what I thought were just equivalent ways of starting Apache? And then what I could do to get it to start up and run properly on boot? One last item to mention is this isn't a permissions problem. I set the permissions to 777 to both the home and kiosk directories (and 666 to the web files) just to be sure that's not the problem.
I am having a problem.I use Ubuntu 10.04 server edition.Two computers on LAN one with Public Ip A other with local (Class C IP)say it BWith a third computer in same subnet I can access a TomCat application running on B as http://Ip of B:8080/applicationI want to use A as a Reverse Proxy for this application to be reachable from internet.So on Googling I came across some thing known as mod_ajp I enabled that on my Server A asa2enmod proxya2enmod proxy_ajpa2enmod headersbut after that I am not able to understand as how do I define vhost to be able to forward HTTP request which come on A as www.myserver.com/appto B which I can see internally as http://Ip of B:8080/application so Tomcat on B handles this.
View 4 Replies View RelatedU have spent 4 days trying to configure my router thinking that it is my router that is not working but when I go to my dynamic dns or my static ip address it takes me to my admin router on the local computers.when I type httpd it says it cannot bind to port 0.0.0.0:80 i checked it is set up to listen to port 80 this is really confusing me i am beginning to think the people who built my server did not set it up properly if i go to localhost or 0.0.0.127 it goes to the apache default page fine.I have not changed anything since it wad installed except the centos 5 updates any ideas?When i login my password is root and the password is the default I have changed nothing else on the system as I still have no clue about it.Just to clarify on my router I have port 80 and port 443 set to my static ip address is this correct or should it be the eth0 Bcast ip address?Can anyone give me an idea of what i need to check? On my router I have set up port 80 and port 443 and dynamic dns and static ip address.Sorry I am totally new to linux never used it before would be nice if anyone has any ideas how i can proceed with this.
View 1 Replies View RelatedI have a little bit of a problem, I run openSUSE as a server on a Dell PowerEdge T610. I use it for sharing files in a local network and as a web server accessible through the public IP (configured through router DMZ). Also, I use Teamviewer for remote control in order to avoid some compatibility and network problems. Generally the computer runs flawless but from time to time, as about once in two weeks, all network related services except the Apache server which runs just fine, and is still accesible, crash. The Samba share can't be accessed anymore, the Teamviewer is also dead and the only way to put everything back in order is a restart. The thing is I don't know if an error occurs since the server hasn't got a monitor installed, and more than that I do most of my work remotely (as in miles and miles away from the location) and it takes me quite some time to actually get there and see what's happening.
So, any ideas what might be happening? I belive that there might be some information in some of the logs, but as I am not an expert in Unix like operating systems I don't exactly know where to start from.
I have written this script to monitor Apache2:
Code:
#!/bin/bash
#count lines that show apache2 but not the fgrep itself
let i=`ps aux | fgrep apache2 | fgrep -v grep | wc -l`
if [ "$i" -gt 0 ]
then
#log something
[Code]...
It has all been working fine until recently when Apache is becoming unresponsive. I manually ran ps to check and there were 3 processes. However when I ran apache2ctl graceful I got the message 'httpd not running, trying to start' Is there a better way to check if a daemon is up?
I'm running both Apache on my site and Etherpad Lite, both on different domains. However, running them both on port 80 causes a conflict. I tried to use a reverse proxy in Apache (this is the configuration -- I'm not sure if I did it right), but it doesn't seem to do anything.
View 1 Replies View Related