i am trying to assign a Static IP address and for the life of my i cannot get it to work Can someone explain to me the easiest way to do it and if i restart the server it won't get lost either.
View 1 RepliesHow would you assign a server a public static IP ?
Ok.. I guess to better ask my question... how to assign server public static IP centos? Like for example I am in the router itself.. where would I go to point ip 44.33.33.21. to ?> 192.168.1.4
What would be the most common in the routers?
I am running a modem in bridge mode to my server
I edit file /etc/sysconfig/network-scripts/ifcfg-eth0 code...
I do service network restart and get nothing ? No connection... Are there other files I need to edit?
I want to assign a static ip address, my network/interfaces files shows
Code:
auto lo
iface lo inet loopback
am I correct to add
Code:
iface eth0 inet static
address 10.42.43.10
netmask 255.255.252.0
gateway 10.42.43.1
or is there more I need?
My server is Linux (centos 5.3). In Server System Dhcp server is running, so it assign ip address to client windows .....
1. I want to assign ip address to Printer (printer Hp laser 3055 )
2. How do I configure cups (Network Printer) in linux server
3. How to configure printer in windows client....
How to do this.
I was trying to assign the static IP address of my internet connection to my home server and managed to make a mess of it. I've configured the router to assign it the address every time but when I rebooted everything the server is cut off from the network completely (rather unfortunate with a headless server...). The only file I've edited on the server when trying to do this is /etc/network/interfaces, everything else network related is default. My intention in editing the file was to make the server accept the IP address assigned by the router since the router was already configured to assign the right one. I put in
Code: inet dhcp in the /etc/network/interfaces file, is that wrong? What is that line supposed to be?
I have got squid 3.0 stable 13 installed on a new centos5 box .I have used it on other centos5 ones and it has worked really well.It didnt give any error messages during installation on this one until i used the proxies in the browser.I have used it on other centos5 ones and it has worked really well.But with this box I am getting this error in browser-The following error was encountered while trying to retrieve the URL:Yahoo!Socket FailureThe system returned: (99) Cannot assign requested addressSquid is unable to create a TCP socket, presumably due to excessive load. Please retry your request.I have tried many options for http_port but to no avail.I have never seen this error before with and am totally clueless
Excerpts from cache.log
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2009/08/13 05:57:17| Squid Cache (Version 3.0.STABLE10): Exiting normally.
[code]....
I am a developer, not a network admin - sorry if this ia dumb question. I need to test an application on CentOS 55 64 bit. The instalation went fine and initially I let DHCP work its magic. The router IP address ia 192.168.0.1 and all other VM's I have are granted dynamic ip address on this range (i.e. 192.168.0.x). However, the CentOS vm got an IP address that looks like it belongs on a different subnet :192.168.1.1
The VM (vmware desktop) network setting for this VM uses "Bridged: Connected directly to the physical network". I can ping the host (Windows 7 64 bit) and the host can ping it (it been the VM) - but no other computer on the network can see it. To make things easier, I changed the network configuration to use a static IP address. Here are my configuration files:
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
HWADDR=00:0C:29:83:4B:A4
ONBOOT=yes
TYPE=Ethernet
[Code]...
I am running Linux AS4 Update version. I have one lan card and the primary IP-Address is 192.168.0.215 & subnet is 255.255.255.0
Now I want to assign an alternative IP-Address on the same card & the IP I want to assign is 192.168.15.215.
I run the following command from root user ifconfig eth0:1 192.168.15.215 netmask 255.255.255.0 up
Now when I ping this IP 192.168.15.215 From Windows machine then its reply me & properly reply comming from this Ip.
But when I want to access this Ip by \192.168.15.215 from run prompt then it gave me error.
The specified network name is no longer available..
I installed the Centos 5.5 and after the Xen. After I put a virtual machine named VM01.Initially it worked properly, I tried everything and it worked.When rebooted, I had problems with the network.I have two network cards eth0 and eth1, but eth1 does not have any ip and I use only eth0.The error that appears is:
vif0.0: received packet with own address the source address
Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
I have an Ubuntu Server 10.04.1 that I have given a static IP address. Every six hours or so I will lose connectivity to it and when I type ifconfig to look at the network information, it has been given an address via dhcp. If I run the /etc/init.d/networking restart command the IP address goes back to my static address and things are fine for another 6 hours or so. Here is what is in my interfaces file:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.60.82.15
netmask 255.255.0.0
broadcast 10.60.255.255
gateway 10.60.254.254
This machine is also a DHCP server and I checked to make sure there are no other DHCP servers on my network. Right now my fix is to have a Cron job running that runs the reset command every 5 hours, but I would like to find a more permanent solution.
I am trying to point my domain to my server with a static IP address. My domain is registered with Network Solutions and they ask "Primary and Secondary DNS" settings in their setup. What primary and secondary DNS settings I need to give when I have a dedicated server with static single IP address with BIND installed.
View 1 Replies View Relatedsetting up my ubuntu server I would also like to run ubuntu desktop for the GUI.
setting up the static ip address with a 2wire gateway from att.
i have followed multiple guides to make my home server use a static ip address. no matter what i do it always reverts back to its dhcp address after about 2 minutes. how do i get the static ip address to stick, or be permanant.
View 9 Replies View Relatedhow to assign a address to my ethernet card all the options available
View 1 Replies View RelatedAm attempting to set a static IP address on a server (to be used with Mythtv) and is running mythbuntu 10.04 (apologies if this is the wrong place to post this). I can set a static IP address that is in the range of 192.168.1.x on other machines on the network but when I try with the server it is not able to connect to the network. When using the DHCP rather than manually assigning the address it is assigned an address with the 10.0.0.x range. Why is it doing this I have never have this problem on other ubuntu boxes (and this one prior to a format of the OS).
The router/gateway is 192.168.1.1 I did have a DHCP server on the mythbox before formatting it and I was able to assign a static 192.168 address and retain internet connectivity. But I have re-enabled the DHCP server on my router since formatting the box.
I have installed a ssh server on a computer (Ubuntu 10.04). This computer will be reboot many times, so the IP address is going to change. As a result, I couldn't connect with an other computer on this server via ssh. That's why I search a solution: either I assign a static IP on my server computer or I heard that I could use a dns name. I don't know if the latter solution is good so I hope to have some precisions. Also, I tried to have a static IP by editing the file : /etc/network/interfaces but it doesn't work.
View 5 Replies View Relatedi know exactly what i need to do, im just not familiar enough with command line to do it properly.i have 7 computers.the first 4 are connected to a router via wireless at one end of the house. of the last 3 only 1 will be able to access the router via wireless, so it needs to share it's one wireless connection via ethernet. this computer i'm going to call 'server'server will have two IP'swlan0 192.168.1.6 this connects to the router that has internet access.eth0 i intend to have the following settingsip:192.168.0.1sub: 255.255.0eth0 will connect to a second router, where the cat5 cable goes from the server, into the internet port of the router where i will define the router's static IP:IP: 192.168.0.100sub: 255.255.255.0gateway 192.168.0.1i have then set the router IP for LAN handling as 192.168.27.1 and all ethernet connections will have a 192.168.27.x IP.
so i need to know how to, without a gui application, use the terminal to assign server eth0 a proper IP address, and tell the server to take the connection it has and share it through eth0 to supply internet for the last 2 computers via ethernet.i had it set up in this way with a windows machine being the one that had the wifi access, but i'd rather have it setup for the ubuntu server to do this task. security is imperative for these 3 remaining machines, so just getting 2 more wifi adapters for a connection to the initial router isn't an option.the 2 that connect to server do so through SSH and though server IS connected via wireless it only makes outward connections through
Using Ubuntu Server maverick here - after altering /etc/network/interfaces to use a static ip and checking /etc/resolv.conf (no alteration needed) no network services were working at all. Here are the contents of interfaces:
Code:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
broadcast 192.168.1.0
gateway 192.168.1.254
I was fairly certain that this was verbatim from my previous server which is no longer attached to the network. After hours of fooling around with no success I changed the address to 192.168.1.99 and it worked perfectly. So my question is: why? My old server used 100. Could the router refuse to give a new server the same address or something like that since that address had been taken in the past?
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
I would like to assign a static IP to Debian running on my virtual box. How should I do it? What needs to be written in /etc/network/interfaces.
View 5 Replies View RelatedI got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies View RelatedHow do I assign IPv4 and IPv6 static addresses permanently in OpenSUSE 11.2? Currently I am only able to assign either IPv4 or IPv6 static address not both. I cannot find even the interfaces file(/etc/sysconfig/network/interfaces).
View 2 Replies View RelatedI have a fresh installed redhat 9 with 1 network card attached may I know what command will I type to assign 10.0.0.1 on the network card?
and also when I type hostname it always reply localhost.localdomain
how can I assign a hostname
I've been attempting to figure this out for about 4 days straight, so far it has not been fruitful. I've installed Ubuntu 10.04 server onto my former gaming system, Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2 cores with 2 GB ram. Overkill I'm sure, especially for a simple personal voip, htpc, storage server.
The problem is only noticeable when I have the vent server running, on the 10.04 server, and I attempt to connect to it through the LAN via the client on my windows computerEverything works fine and connects, LAN and from the outside, as long as the server is set to DHCP. However when attempting to switch to a static IP address, the vent client will not detect the vent server at all.Aside from an annoyance at having to stick with DHCP, I am still curious as to why the static settings will not function. Something so simple has turned into something quite difficult.
I can still connect to the Webmin interface and Putty into server with either DHCP or static IP enabled.I've performed the following troubleshooting steps so far:1) Followed the directions at https://help.ubuntu.com/8.04/serverg...iguration.html2) Edited the /etc/network/interfaces file through the CLI with nano and through notepad on the windows computer3) Through Webmin I've assigned the static IP, although for some reason it does not include a gateway field.4) I've rebooted the server5) I've issued the CLI
Code:
sudo /etc/init.d/networking restart
Here is the file /etc/network/interfaces:
[code]....
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
I have set up a cloud (Ubuntu) environment in my test lad and it's working fine I am confused setting up the public IP in the production environment. The cloud instance will get only a Internal IP address ( Private) we cannot bind the Public Ip to the cloud instance as it uses Elastic IP, so I am confused how can I set up this if I have about 250 Public Ip to 250 cloud instance. How will I map this 250 Public IP with the 250 internal IPs is there any hardware device.
View 3 Replies View Relatedthe Centos Server Edition , so glad I make that clear , my problem is the changes of my intern ip adress from the Centos server , and i wont to make it Static so it gets always the same ip.
View 2 Replies View RelatedJust Installed Fedora 10 on Dell PowerEdge 2950. Installation went fine. Problem is I cannot Assign a Ip address to eth0. Service "NetworkManager " dies on its own "ifconfig eth0 192168.0.8/24" works though.
View 6 Replies View Related