Ubuntu Servers :: Assign The Static IP Address Of Internet Connection
Jan 14, 2010
I was trying to assign the static IP address of my internet connection to my home server and managed to make a mess of it. I've configured the router to assign it the address every time but when I rebooted everything the server is cut off from the network completely (rather unfortunate with a headless server...). The only file I've edited on the server when trying to do this is /etc/network/interfaces, everything else network related is default. My intention in editing the file was to make the server accept the IP address assigned by the router since the router was already configured to assign the right one. I put in
Code: inet dhcp in the /etc/network/interfaces file, is that wrong? What is that line supposed to be?
View 9 Replies
ADVERTISEMENT
Feb 17, 2009
I am a windows user with no linux experience prior to Friday. Im setting up a music server (SqueezeCenter) running Fedora 10.
With the help of posts of this site Ive made good progress with complicated stuffnamely getting Samba and VNC working. My Fedora machine and my windows machines now see each others shared files, and I can control my Fedora machine from my windows machine. (The Fedora machine will ultimately be headless.)
But Im having trouble with a seemingly simple issue setting up my Fedora box with a static IP address. With DHCP enabled on my network Ethernet adapter, all works fine. I then used the System>Administration>Network menu to disable DHCP and to assign the same IP address that DHCP chose. When I do this, two cases need to be distinguished:
1. If I keep the box checked for Controlled by Network Manager, the Network Manager Applet reports a network connection, I nevertheless cannot access the internet, but my Fedora machine is able to communicate with my Squeezebox music player (connected to my network via my DSL modem Ethernet connections, and with a fixed IP address). 2. If I uncheck the box Controlled by Network Manger, then the Network Manager Applet reports no network connection and my Fedora machine is not able to communicate with my Squeezebox music player (and I of course have no internet connectivity).
Ive seen references on other posts suggesting that the Network Manager service be disabled. But I see no way to manually configure the network.
View 4 Replies
View Related
Jun 13, 2010
I want to assign a static ip address, my network/interfaces files shows
Code:
auto lo
iface lo inet loopback
am I correct to add
Code:
iface eth0 inet static
address 10.42.43.10
netmask 255.255.252.0
gateway 10.42.43.1
or is there more I need?
View 4 Replies
View Related
May 1, 2010
i am trying to assign a Static IP address and for the life of my i cannot get it to work Can someone explain to me the easiest way to do it and if i restart the server it won't get lost either.
View 1 Replies
View Related
Nov 27, 2010
I have installed a ssh server on a computer (Ubuntu 10.04). This computer will be reboot many times, so the IP address is going to change. As a result, I couldn't connect with an other computer on this server via ssh. That's why I search a solution: either I assign a static IP on my server computer or I heard that I could use a dns name. I don't know if the latter solution is good so I hope to have some precisions. Also, I tried to have a static IP by editing the file : /etc/network/interfaces but it doesn't work.
View 5 Replies
View Related
Feb 11, 2009
I have installed Ubuntu 8.10 Server Edition on Virtual Box. When I start the virtual machine I do not have connection to my home network. The router I have does not assign any IP address to this machine. Now I have some questions which I am finding hard to find answers for over the internet and other forums.
If I do have a network interface (I checked this using ifconfig -a) then is there a command to actually make the operating system connect to that network (something like repair on windows)?? Also what is the difference between a network interface with alias eth0 and eth5? I know that when it was eth0 the virtual machine used to connect to the network automatically. Now that it is eth5 it does not! I do not know however if this is related.
View 3 Replies
View Related
Mar 20, 2010
my Apache2 was running fine for a while. Bur yeserday when I tried to start it again after a couple of weeks of vacation, I got the message:
* Starting web server apache2 [Sat Mar 20 10:48:12 2010] [warn] The Alias directive in /etc/phpmyadmin/apache.conf at line 3 will probably never match because it overlaps an earlier Alias.
[code]....
View 7 Replies
View Related
Feb 17, 2009
Just Installed Fedora 10 on Dell PowerEdge 2950. Installation went fine. Problem is I cannot Assign a Ip address to eth0. Service "NetworkManager " dies on its own "ifconfig eth0 192168.0.8/24" works though.
View 6 Replies
View Related
Jul 31, 2010
I am trying to find out if it is possible for me to have a static ip address with my 3G usb modem ? I am using gnome network manager in Ubuntu 10.04 but it there is no option for me there for a static IPV4 address. I know with a wireless or ethernet connection you would modify /et/dhcp3/dhclient.conf and/or /etc/network/interfaces. I don't think those two would do for a PPP connection. When I go to /etc/ppp/ I see no .conf file that I could modify.
View 2 Replies
View Related
May 17, 2010
I just upgraded to 10.04 and I want to set the static ip address but I can't find where to do it.
View 2 Replies
View Related
Mar 7, 2011
Im running ubuntu server 10.10 on my wirtual mashine at home. For now i have few service installed and configured:apache with phpand mysql support,ftp,phpmyadmin.. My ip address is not static, i tryed to configure by following some guide but without success.
First i edit this in /etc/network/interfaces (changing dhcp to static
Code:
# The primary network interface
auto eth0
iface eth0 inet static
[Code].....
View 9 Replies
View Related
May 23, 2010
what are use cases for static ip address for clients or servers.
View 3 Replies
View Related
Apr 6, 2010
How do I decide what IP address to enter in my config file when assigning a static IP. All of the instructions I can find say something like "of course you should modify the file according to your own settings." Should I just use the gateway and IP that returns from "iwconfig" and "route -nee"?
View 5 Replies
View Related
Aug 3, 2010
I am struggling with what might be a minor problem. I have a home computer which I would like to setup as a webserver and hence give it a static IP address. It is connected to by wire to a router that is connected to the WAN via PPPOE. If I enable the network card on DHCP it works fine in browsing the web. If I now set it to static IP address it does not brown. Essentially I use the command setup to run the static IP setup. I then set my IP address to 192.168.254.X , the subnet mask 255.255.255.0 and the default gateway to 192.168.254.1 (this is the router connected to the WAN). I am able to ping the router, however when I try and browse on static it does not work. Your help will be most appreciated as this has taken way too long to solve and I have Googled as much without success.
View 5 Replies
View Related
Oct 16, 2010
I don't know where to put this, or even what I'm looking for.
I've tried for 6 hours today to get my WPA2 wireless to work as a static IP on my laptop to no avail.
Basically I put things in correctly (at least according to that thread) but I get no interent. When I restart I get the correct IP address but no internet pages will load.
The network monitor I have on my panel shows that it is trying to send and receive information, but I can not get my pages to load.
I'm desperately in need of help, but I really don't know how to even ask for it correctly.
But to start here is my interfaces file (one config of about 15 I've tried).
Code:
auto wlan0
iface wlan0 inet static
address 10.42.32.113
netmask 255.255.255.0
[Code].....
My router is a linksys WRT54GS. My wireless is set up as WPA2-Personal with the "algorithm" as TKIP+AES.
Its like it wants to connect and gives me an IP. But I just don't get any real web data.
I've restarted and tried restarting just the network.
View 5 Replies
View Related
Apr 24, 2010
Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
View 2 Replies
View Related
May 29, 2011
how to assign a address to my ethernet card all the options available
View 1 Replies
View Related
May 25, 2011
Using Ubuntu Server maverick here - after altering /etc/network/interfaces to use a static ip and checking /etc/resolv.conf (no alteration needed) no network services were working at all. Here are the contents of interfaces:
Code:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
broadcast 192.168.1.0
gateway 192.168.1.254
I was fairly certain that this was verbatim from my previous server which is no longer attached to the network. After hours of fooling around with no success I changed the address to 192.168.1.99 and it worked perfectly. So my question is: why? My old server used 100. Could the router refuse to give a new server the same address or something like that since that address had been taken in the past?
View 1 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Nov 18, 2010
I've been attempting to figure this out for about 4 days straight, so far it has not been fruitful. I've installed Ubuntu 10.04 server onto my former gaming system, Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2 cores with 2 GB ram. Overkill I'm sure, especially for a simple personal voip, htpc, storage server.
The problem is only noticeable when I have the vent server running, on the 10.04 server, and I attempt to connect to it through the LAN via the client on my windows computerEverything works fine and connects, LAN and from the outside, as long as the server is set to DHCP. However when attempting to switch to a static IP address, the vent client will not detect the vent server at all.Aside from an annoyance at having to stick with DHCP, I am still curious as to why the static settings will not function. Something so simple has turned into something quite difficult.
I can still connect to the Webmin interface and Putty into server with either DHCP or static IP enabled.I've performed the following troubleshooting steps so far:1) Followed the directions at https://help.ubuntu.com/8.04/serverg...iguration.html2) Edited the /etc/network/interfaces file through the CLI with nano and through notepad on the windows computer3) Through Webmin I've assigned the static IP, although for some reason it does not include a gateway field.4) I've rebooted the server5) I've issued the CLI
Code:
sudo /etc/init.d/networking restart
Here is the file /etc/network/interfaces:
[code]....
View 6 Replies
View Related
Jul 19, 2011
How would you assign a server a public static IP ?
Ok.. I guess to better ask my question... how to assign server public static IP centos? Like for example I am in the router itself.. where would I go to point ip 44.33.33.21. to ?> 192.168.1.4
What would be the most common in the routers?
View 7 Replies
View Related
Jul 23, 2011
I am running a modem in bridge mode to my server
I edit file /etc/sysconfig/network-scripts/ifcfg-eth0 code...
I do service network restart and get nothing ? No connection... Are there other files I need to edit?
View 12 Replies
View Related
Jan 11, 2010
I would like to assign a static IP to Debian running on my virtual box. How should I do it? What needs to be written in /etc/network/interfaces.
View 5 Replies
View Related
Apr 26, 2010
I got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies
View Related
Feb 19, 2010
How do I assign IPv4 and IPv6 static addresses permanently in OpenSUSE 11.2? Currently I am only able to assign either IPv4 or IPv6 static address not both. I cannot find even the interfaces file(/etc/sysconfig/network/interfaces).
View 2 Replies
View Related
May 26, 2010
I've set up a permanent DHCP lease for my MAC address. I did this hoping to resolve the fact that I share my Internet ADSL connection with my wife and my daughter (the latter a great bandwidth hog)!
View 5 Replies
View Related
Feb 7, 2011
I'm trying to setup a new Ubuntu Server via terminal to host a variety of websites. I need quite a bit of space, so our Windows System admin set me up with an iSCSI connection to a drive array, however I'm a little unsure how to translate that and get the is open-iscsi service connecting to it.The settings he sent me include:
DNS Domain Name
two IP Addresses for it
A Name for the service: pd2_video
An IQN:
He enabled CHAP with a username and password.Where do I need to look to see documentation on how to connect to this service?I have tried following: [URL] However I get:
iscsiadm: connection to discovery address x.x.x.x failed
View 1 Replies
View Related
May 5, 2011
I have a problem with my Terminal Server Client, I cannot seem to connect to any windows server via IP address. Can anyone please recommend any tool I could use to connect? I need to work on the server for admin interfaces example Admin Kits for workspace protection
View 9 Replies
View Related
Dec 14, 2009
lost my internet connection on fedora 12 ? i try to assaing the ip address manual in the configruation part but no nothing happen I've tried googling for the problem
View 4 Replies
View Related
May 14, 2010
I have a fresh installed redhat 9 with 1 network card attached may I know what command will I type to assign 10.0.0.1 on the network card?
and also when I type hostname it always reply localhost.localdomain
how can I assign a hostname
View 4 Replies
View Related