I'm trying to get php-fpm running to use with nginx. I usually just use spawn-fcgi, but I would like to try php-fpm this time. I was hoping that it would be as easy as yum install php-fpm, but alas, that is not so. how to get php-fpm working on CentOS?
View 1 RepliesI had a task to install nginx,i download the nginx-0.5.35.tar.gz and i extracted.I got following error when i ran these commands ./configure ----with-http_gzip_static_module & ./configure --with-http_geoip_module
[root@localhost nginx-0.5.35]# ./configure --with-http_gzip_static_module
./configure: error: invalid option "--with-http_gzip_static_module"
[root@localhost nginx-0.5.35]#
[code]....
how to install PHP and MySQL on Nginx with CentOS?
View 1 Replies View Relatedway to get nginx to perform DNS lookups at regular intervals against hostnames that are defined for upstream servers? It seems nginx only performs a DNS lookup once, the first time it starts, and subsequently does not perform any other DNS lookups. This causes problems when the ip addresses of our upstream servers change.
I posted this same question in the nginx forum; however I also posted it here as it seems that not many of the posts there get answered.
[URL]
I have been looking for a while now, but I keep getting 403's for maps but not for files... So if you go to http://gmod.ws/ you get the error but if you go to http://gmod.ws/index.php you don't.I don't see where the problem is.We're running a CentOS 5.5 box.
View 2 Replies View RelatedI want Install nginx As Reverse Proxy for Apache
View 5 Replies View RelatedI run a web server using mandriva 2010.2 , I use webmin / virtualmin to facilitate the administration of virtual hosts, I've tried using nginx module for webmin that is in [URL] but for some reason the module could not be used by webmin.
View 4 Replies View RelatedAs Pound is broken under Fedora 15, which I'm running on my Linux server, I decided to try out nginx and move the Pound configuration to something in nginx which does the same.However, the nginx configuration is a lot more complex than in Pound. What I try to do:
- nginx will listen on port 80
- requests for www.mydomain.nl => Domino HTTP server (on different server)
- if this server is not reachable, go to another Domino HTTP server
[code]....
I use mandriva 2010.2 on my web server, and i use nginx for the web server. how to change nginx version header.? it's already installed
View 3 Replies View Relatedhow could i rewrite and redirect
Quote:
[URL]
to
Quote:
[URL]
domain from forum. to club. (red color part) url rewrite, blue color part is variable
My intention is to have EngineX on the frontend handling all static files, and Apache + mod_php in charge of handling PHP requests. I have optimized nginx to be as efficient as possible in handling static files, but have very little experience with Apache. Since Apache would only be processing PHP requests, would the standard Apache optimization guides suffice or would it best to configure it differently?
PS: this is a dedicated file server, the database is hosted separately.
I have VPS installed with Debian, NGINX, mysql, php and wordpress. By default the template gives 1 wordpress install in the /var/www/ directory. However, now I want to add more domains with wordpress to that VPS. I created a directory called /home/public_html/domain1.com and linked it to the /var/www/ directory. then I created another directory called /home/public_html/domain2.com and uploaded wordpress there. What I did next was edit my /etc/nginx/nginx.conf file with the following code:
Code:
user www-data www-data;
worker_processes 4;
events {
[code].....
I have a perfectly working installation of nginx / PHP / fastcgi on the latest stable Debian distribution. No problems at all, apart from this one: When a PHP script (script A) is written to request a PHP script on the same web server (script B), nginx takes several minutes to respond and finally the connection times out. And it happens only when invoking script A through nginx. Calling it from command line works fine � I get a normal output of script B.
Literally, the test case is as simple as:
Script A:
PHP Code:
[code]....
I suppose the root of the problem may be some obstacle occurring when php5-cgi ends up invoking itself. And this is what happens when script A is called through nginx. But I have no ideas yet how to address the problem. One of my PHP applications checks itself during installation, that's why I need to request a PHP script from a PHP script on the same server.
I'm trying to set up my web server (nginx) as a catchall virtual host, as per an example that can be seen here: [URL].. (It's the Wildcard Subdomains in a Parent Folder example). Now, here's my issue. I use Wordpress on the coburndomain.org domain. I have pretty URLs enabled, that make my Wordpress articles look like this:[URL].. At the moment, nginx is reporting 500 Errors, saying that index.php is not a directory. What I want to do is make a rewrite rule that allows me to use the above URL example with nginx.
I followed this tutorial to do so: [URl].. , but I'm not sure how to apply it to my setup. Here's my configuration files from Debian Squeeze with Nginx onboard:
[Code]...
I've installed Nginx-full on a debian jessie server and want to install Wordpress, but for some reason Nginx-full isn't being seen as providing the httpd virtual package, so wordpress insists on installing apache.
According to everything I can find, nginx-full provides the httpd virtual package and this shouldn't happen. Is this a bug?
nginx vs. litespeed, is one better for a web server?
View 5 Replies View RelatedI have Centos 5.3 on our server When I log-in in webmin I have a message "Warning - Your system is actually running CentOS Linux version 5.3." In the next line I have a button "Update Detected Operating System" My question is Do I need to click the link and update Detected operating system? If I do, is it going to change any configuration on our server?
View 2 Replies View RelatedI have a multiheaded setup with one X server and two displays i.e. :0.0 and :0.1. Is there a way to have one instance of an X client for example xeyes and have this displayed on both displays at the same time. I want one keyboard/mouse that controls both displays. I do not want to use Xinerama.
View 5 Replies View RelatedI have a CentOS 5.5 system that I am able to run fully virtualized 32-bit VM's on just fine, but I have need to run some 64-bit VM's on it. It has a "paravirtualized" option that might possibly work, but it wants a network install path, and I am not sure if this is the actual solution. When I go to create the VM I only have i686 and xen for options on the virtualized method, is there a way to add (I am presuming) amd64 in here somehow? The CPU is definitely 64-bit. My google-fu hasn't found results for me yet.
View 3 Replies View Relatedservice xend status returns nothing - simply moves to next line
service xend start does the same thing
xm list
ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory)
Error: Unable to connect to xend: No such file or directory. Is xend running?
service xend status returns nothing - simply moves to next line.service xend start does the same thing
xm list
ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory)
Error: Unable to connect to xend: No such file or directory. Is xend running?
I just did a basic service install of Centos5 and added the RPM package install of VMware-server 2.02. but I don't the VMware service is running (based upon the flowing screen:
[root@centoshost1 vmware-mui-distrib]# ps
PID TTY TIME CMD
2925 pts/0 00:00:00 bash
22378 pts/0 00:00:00 ps
So how do i start the VM service?
Using the EPEL Repository, I went in and installed Cobbler to my DHCP/Gateway box.Everything went smoothly on the installation front. I went ahead and modified the cobbler settings file (/etc/cobbler/settings) to point to my server IP (same box), and then got tftp running properly. Now here's the problem.Normally, you need to run `cobbler check` to find issues and correct them. I run that, and all I get is blank. Nothing. It just hangs at the prompt until I kill it using CTRL+C.When I CTRL+C from the hanging, it states "cobblerd does not appear to be running/accessible"...
Code:
[root@PalaceRedirect ~]# service cobblerd status
cobblerd (pid 6991) is running...
[code]....
I'm attempting to get freetds and sybase up and running on my centos server, mainly for nagios - MSSQL checks. I've installed freetds freetds-devel ok but am having issues getting SYBASE installed. I've had a go via cpan but get a failure on the sybase environment variable. I've set it to /etc where the conf file is located as well as trying /urr/lib64 for the tds libs, but no joy. Has anyone had much luck with this on centos?
export SYBASE=/etc
[root@nagios ~]# echo $SYBASE
/etc
cpan DBD::Sybase
CPAN: Storable loaded ok (v2.15)
[Code]...
installed a new centOS 5 server, and after the installation, everything seem to work well but for httpd not running. when i try to issue the restart command i get the following error:
[root@appdev ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: httpd: Syntax error on line 206 of /etc/httpd/conf/httpd.conf: Cannot load
[code]....
I am new to linux. I want to run a server-client (c#) windows/console based application on CentOS 5.4. The code in C# has made using visual 2010. Should I use wine for this purpose or go for mono?
View 1 Replies View RelatedMy office is on migrating to UNIX system. I am configuring Centos as our server including some program will be running on it. But one of the problem is we use foxpro for operating some program on server directly. I can run that program on Centos using DOSBox. My question is how can i run that program on winxp client that connected to network through samba to that program on server? so my plan is just give the shortcut and link it to server. I have tried to open it but not work.
View 1 Replies View RelatedI have been trying for days now to get this to work. didn't want to bother people with my questions, i have installed Fail2Ban 0.8.4 on CentOS 5.4.
I get the email notifications from Fail2Ban stating that it just blocked another IP, however, when i look at the iptables through webmin, nothing is actually in there, also the log/secure file dose not show that the ip has been blocked.
Even when I try to log-in with the wrong password, after a few tries i get the email telling me that my ip is blocked, however, I can still SSH using my 'blocked' IP.
recently i setup new LAMP server , after some days faced a strange problem? suddenly the server load goes to 100 or 80 but there is no wearied process running? the normal lod is between 0.5 to 1.5? the server have 2 hdd on hardware raid 0
[Code]...
I am setting up a CentOS server that has no screen connected, and only has 2 Tesla cards. I have created a minimal xorg.conf and xinitrc file that doesn't load mouse or keyboard, and only creates two screens, one for each card at 320x200x24 bit. This is so I don't waste VRAM on a framebuffer I can't see.
I modified the xinitrc to just load tdm and nothing else as GNOME is a RAM hog. I am then using this setup to render stuff offscreen using OpenGL into FBOs which I read back to CPU and process. Currently for development I just run startx& when I login. I now want to know how to set x server to start automatically at boot. The CentOS docs say that it will try to load the GNOME login manager. The thing is that I don't want a login manager as it is useless as I login remotely via SSH.So:
1 - how to enable automatic x server in CentOS (im used to Ubuntu so not sure how to do this on Red Hat variants)
2 - leave x server running without starting login manager