I had a task to install nginx,i download the nginx-0.5.35.tar.gz and i extracted.I got following error when i ran these commands ./configure ----with-http_gzip_static_module & ./configure --with-http_geoip_module
[root@localhost nginx-0.5.35]# ./configure --with-http_gzip_static_module
./configure: error: invalid option "--with-http_gzip_static_module"
[root@localhost nginx-0.5.35]#
[code]....
how to install PHP and MySQL on Nginx with CentOS?
View 1 Replies View RelatedI want Install nginx As Reverse Proxy for Apache
View 5 Replies View RelatedI just want to try using NGINX as reverse proxy for POP3 and IMAP. Does anyone know how to configure it ?
View 7 Replies View RelatedI had just set up nginx on my server. I have PHP and everything working okay. Except when I try the URL
http://xxx.xxx.xxx.xxx/123
I get redirected to
http://_/123
but when I try the url
http://xxx.xxx.xxx.xxx/123/
It works just as I want it to. How can I get nginx to treat the slashless url decently?
way to get nginx to perform DNS lookups at regular intervals against hostnames that are defined for upstream servers? It seems nginx only performs a DNS lookup once, the first time it starts, and subsequently does not perform any other DNS lookups. This causes problems when the ip addresses of our upstream servers change.
I posted this same question in the nginx forum; however I also posted it here as it seems that not many of the posts there get answered.
[URL]
I have been looking for a while now, but I keep getting 403's for maps but not for files... So if you go to http://gmod.ws/ you get the error but if you go to http://gmod.ws/index.php you don't.I don't see where the problem is.We're running a CentOS 5.5 box.
View 2 Replies View RelatedI am attempting to compile nginx-0.8.49 with the upstream fair module. The configure script seems to run ok with the following options:
Code:
#./configure --add-module=../upfair
but when I run make it fails with this error:
Code:
objs/src/os/unix/ngx_process.o: In function `ngx_process_get_status':
/mnt/store/src/nginx/SOURCES/nginx-0.8.49/src/os/unix/ngx_process.c:490: warning: `sys_errlist' is deprecated; use `strerror' or `strerror_r' instead
/mnt/store/src/nginx/SOURCES/nginx-0.8.49/src/os/unix/ngx_process.c:490: warning: `sys_nerr' is deprecated; use `strerror' or `strerror_r' instead
[Code]...
I have this code in PHP that is hosted on an nginx server.
Code:
I can download the files but the problem is I think nginx is treating it as a text file and changes all "0x0A" to "0x0D 0x0A"
Unfortunately the files are not text files but executable files which makes the downloaded file corrupted.
Do I need to add a specific header to prevent this from happening?
I'm trying to get php-fpm running to use with nginx. I usually just use spawn-fcgi, but I would like to try php-fpm this time. I was hoping that it would be as easy as yum install php-fpm, but alas, that is not so. how to get php-fpm working on CentOS?
View 1 Replies View RelatedI have installed Nginx with PHP-FPM on Debian 8 to learn more about Linux permissions. Nginx is run as www-data user.
I have created a simple PHP script that outputs the date. I have set the permission as 000 (no permission at all) and it is root:root. How come I can still run this script in the browser without getting access denied? The script is inside a folder with world execution. When removing the world execution permission, the script can't be run. How does this all connect to each other?
'm using Debian 6 (Squeeze) and I'm trying to migrate away from Apache to Nginx, but my Nginx installation seems to be showing some weird behavior.
aptitude install nginx-extras
/etc/init.d/apache2 STOP
/etc/init.d/nginx START
the configuration file /etc/nginx/global.conf syntax is ok [alert]: mmap(MAP_ANON|MAP_SHARED, 33554432) failed (28: No space left on device)
configuration file /etc/nginx/global.conf test failed
I run a web server using mandriva 2010.2 , I use webmin / virtualmin to facilitate the administration of virtual hosts, I've tried using nginx module for webmin that is in [URL] but for some reason the module could not be used by webmin.
View 4 Replies View RelatedAs Pound is broken under Fedora 15, which I'm running on my Linux server, I decided to try out nginx and move the Pound configuration to something in nginx which does the same.However, the nginx configuration is a lot more complex than in Pound. What I try to do:
- nginx will listen on port 80
- requests for www.mydomain.nl => Domino HTTP server (on different server)
- if this server is not reachable, go to another Domino HTTP server
[code]....
I use mandriva 2010.2 on my web server, and i use nginx for the web server. how to change nginx version header.? it's already installed
View 3 Replies View Relatedhow could i rewrite and redirect
Quote:
[URL]
to
Quote:
[URL]
domain from forum. to club. (red color part) url rewrite, blue color part is variable
How would a make files in /home/user01/file available on the web as [URL]? Is it possible for me to have anyone to access that link to log in as user01?
View 3 Replies View RelatedMy intention is to have EngineX on the frontend handling all static files, and Apache + mod_php in charge of handling PHP requests. I have optimized nginx to be as efficient as possible in handling static files, but have very little experience with Apache. Since Apache would only be processing PHP requests, would the standard Apache optimization guides suffice or would it best to configure it differently?
PS: this is a dedicated file server, the database is hosted separately.
I have VPS installed with Debian, NGINX, mysql, php and wordpress. By default the template gives 1 wordpress install in the /var/www/ directory. However, now I want to add more domains with wordpress to that VPS. I created a directory called /home/public_html/domain1.com and linked it to the /var/www/ directory. then I created another directory called /home/public_html/domain2.com and uploaded wordpress there. What I did next was edit my /etc/nginx/nginx.conf file with the following code:
Code:
user www-data www-data;
worker_processes 4;
events {
[code].....
I have a perfectly working installation of nginx / PHP / fastcgi on the latest stable Debian distribution. No problems at all, apart from this one: When a PHP script (script A) is written to request a PHP script on the same web server (script B), nginx takes several minutes to respond and finally the connection times out. And it happens only when invoking script A through nginx. Calling it from command line works fine � I get a normal output of script B.
Literally, the test case is as simple as:
Script A:
PHP Code:
[code]....
I suppose the root of the problem may be some obstacle occurring when php5-cgi ends up invoking itself. And this is what happens when script A is called through nginx. But I have no ideas yet how to address the problem. One of my PHP applications checks itself during installation, that's why I need to request a PHP script from a PHP script on the same server.
I'm trying to set up my web server (nginx) as a catchall virtual host, as per an example that can be seen here: [URL].. (It's the Wildcard Subdomains in a Parent Folder example). Now, here's my issue. I use Wordpress on the coburndomain.org domain. I have pretty URLs enabled, that make my Wordpress articles look like this:[URL].. At the moment, nginx is reporting 500 Errors, saying that index.php is not a directory. What I want to do is make a rewrite rule that allows me to use the above URL example with nginx.
I followed this tutorial to do so: [URl].. , but I'm not sure how to apply it to my setup. Here's my configuration files from Debian Squeeze with Nginx onboard:
[Code]...
I've installed Nginx-full on a debian jessie server and want to install Wordpress, but for some reason Nginx-full isn't being seen as providing the httpd virtual package, so wordpress insists on installing apache.
According to everything I can find, nginx-full provides the httpd virtual package and this shouldn't happen. Is this a bug?
I'm using Ubuntu 10.04 along with nginx 0.8.52 from the Nginx PPA. Server Side Includes like below aren't working. The output from 'nginx -V' appears to show it was compiled without the SSI module:
Quote:
kurtosis@kurtosis-desktop:~/bin/nginx$ nginx -V >> test.txt
nginx version: nginx/0.8.52
TLS SNI support enabled[code]....
but I just want to confirm before I go about removing it and compiling my own. Anyone know for sure? (also that IO redirect apparently doesn't work in this case...)The SSI line I've tried to use is a basic include footer (only html files involved, no scripting languages or web frameworks of any kind):
Code:
<!--#include virtual="footer.html" -->
nginx vs. litespeed, is one better for a web server?
View 5 Replies View RelatedI have download the JRE for java 1.7 in tar.gz format and extracted it. Now im left with a java folder that i have no idea what to do with. My goal is to install this JRE onto my server.
View 19 Replies View RelatedI just downloaded a file that ends with .Repo, I believe it's a repository file. How should I install this type of file and where/which directory it should be extracted or saved to?
My apology for being a suzee nubbee (Windoz refugee).
When I first installed the openSUSE, I had to extract whole iso to sda4, because there was some kind of with CD (scratched or something like that), Now I want to add this part to grub, so that when I want to reinstall it, it will be ready for me. I tried doing this with yast, but could't figure out whole thing.
My current setup:
kernel image: (hd0,4)/boot/i386/vmlinuz-xen
initial ram disk : (hd0,4)/boot/initrd-xen
root-device:/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4
vga-mod:1024x768, 24 bits (mode 0x318)
optional parameters: resume=/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4 splash=silent quiet showopts
This tries to do it, but gives error while trying to boot.
I am trying to install a program called libdvdcss0.0.1, it was a tar,gz2 file and I already extracted it via terminal to /opt/ but now that its extracted, I read the install readme file and tried going by those directions. Not working here is my results on that:
scott@Home:~$ cd /opt/libdvdcss-0.0.1/
scott@Home:/opt/libdvdcss-0.0.1$ /configure --help
bash: /configure: No such file or directory
scott@Home:/opt/libdvdcss-0.0.1$ configure --help
configure: command not found
scott@Home:/opt/libdvdcss-0.0.1$ make install
cd extras/libdvdcss && make install
make[1]: Entering directory `/opt/libdvdcss-0.0.1/extras/libdvdcss'
mkdir -p /videolan
m 644 videolan/dvdcss.h /videolan
make[1]: m: Command not found
make[1]: [install] Error 127 (ignored)
mkdir -p
mkdir: missing operand
Try `mkdir --help' for more information.
make[1]: *** [install] Error 1
make[1]: Leaving directory `/opt/libdvdcss-0.0.1/extras/libdvdcss'
make: *** [install] Error 2
scott@Home:/opt/libdvdcss-0.0.1$
I don't know if its something I am doing wrong or what but everytime I try and install a file this way or by the programs readme file it always goes wrong in someway shape or form. The only way I have installed a program successfully is through kpackagekit and I am desperately trying to learn terminal's language here, the only thing standing in my way from switching from windows to linux entirely is these damn problems.
I have been using ubuntu for a good time and now i want to install opensuse.I have dwnlded the new (11.2) version 2 times but on installing it says unable to create repository. it takes a full day to dwnld here.. please suggest how to use the existing dwnld or a way toget a correct dwnld. i think the earlier one is corrupt.
View 9 Replies View RelatedI got the etpro 3.2.6 zip file and extracted it but there are no files at all that can be run in linux inside the folder even though it was supposed to be a linux download. Is there something I am missing and is there an easier way to install 3.2.6?
View 2 Replies View Related