I have a problem sending of file attachment using Instant Messengeri have a firewall using firestarter, if i used outside firewall they can able to recieve my file in instant meesenger but if i used firestarter it always cancelled my sending of file attachment....
View 3 RepliesI am trying to make a vnc connection from pc #2 to pc #1. Pc #1 is a debian pc behind a zyxel router (P-2602HW-D1A). Pc #2 is a windows xp pc another place at the internet.I have configured the zyxel router to forward incomming trafic on port 5902 to the local ip-adress of the debian box. The debian box is running a vnc server, listening on port 5902.But i dosn?t work.I have tryed to scan the zyxel routers ipadress on port 5902 from the internet, but the scanner says that the port is closed.The vnc server on pc #1 is working fine on the local network. I can connect to the server from a pc on the same side of the zyxel router.Is it deffenitly a router problem, or could it have something to do with debians own firewall?
View 2 Replies View RelatedIf I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View RelatedI want to open port 2700 on my firewall but I don't know how I try with Code:iptables -A INPUT -i eth0 -p tcp --sport 2700 -m state --state ESTABLISHED -j ACCEPT But the port is not open I see the firewall configuration with the command setup . I use CentOS 5.3 here a screen of my configuration :http://upbg.net/out.php/i3537_sshot3.pngCurrently my firewall is off because I don't know how to turn on 2700 when the port is open I will turn on firewall .If I write 2700 in other ports field will 2700 be open ? Before 1 month I try but the port was not open . I have only 1 last question will firewall reduce the load of the my server now mysql use many CPU % and I just don't know why
View 14 Replies View RelatedI want to open the port 18680 on my remote Fedora 14 machine. I didsudo iptables -I INPUT -p tcp --dport 18680 -m state --state NEW,ESTABLISHED -j ACCEPTsudo iptables -I OUTPUT -p tcp --sport 18680 -m state --state ESTABLISHED -j ACCEPTsudo service iptables saveThe status returned is OK.I have also opened the port on my security group on Amazon. Also, I rebooted the machine.When I use the browser to view the application running at port 18680 the browser cannot connect.
View 1 Replies View RelatedI have properly configured my router to open a port for Transmission and Vuze. The OpenSuSE firewall settings are somewhat confusing, however. How do I add a port specifically for the BT protocol? I know it's the firewall causing issues, because when I shut it down, my BT apps roar to life, and die with a whimper when I turn it back on. In Ubuntu, opening a port in the router is automatically configured in the firewall; that is apparently not the case with this distro.
So, when I go to Yast Firewall, I see "allowed services" under the tabs available. When I hit that tab, I see a dropdown menu that contains services such as NetBios Server and Samba Server. Am I choosing one of those available and adding a port to it? Am I adding a custom service via the Advanced settings, and if so, why isn't there a way to label the service so that it shows up under allowed services?
I am running lmgrd on CentOS5, but it returns Failed to open the TCP port number in the license. The port is 27000, how can I open that port?
View 5 Replies View Relatedi have to deal with reverse proxy issue and want to access few LAN devices having port 5900 and 9999, what exact steps i have to follow to allow this port in fedora firewall.
View 3 Replies View RelatedI can't port forward to ftp behind my firewall, I tried several attempts but none worked.
Can anyone help me solve this?
every now and then Firewall Builder fails to open rules (*.fwb)and I have to use some old backup. it does load 'object libraries' but the main 'currently editing policy' panel is empty.(in gnome, debian testing amd64)
View 1 Replies View RelatedI have just installed CentOS and it is working fine!I made a masquerade with the document there: I didn't used the script, because right now, I do not completely understand it, and obviously I am not modifying anything by leaving it like that.I was using Mandriva before and I am used to graphical tools My questions are:I add the following lines in my iptables:
[root@localhost ~]# service iptables stop
[root@localhost ~]# iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE
[root@localhost ~]# service iptables save
[code]....
How do I open ports 5198/udp and 5199/udp on a slackware based firewall?
View 2 Replies View RelatedI found that I can not use the UDP port on FC 12.I new install one FC 12 , but when I use the next command nmap -sU localhost.I found all udp port has been filtered.I don't know how to open the udp ports . for I need use some udp port.I use iptables , but not working. Why ?
View 6 Replies View RelatedI just installed apache. I didn't change the configuration files at all except add Quote: # added servername to avoid the could not determine fqdn error ServerName myname.homelinux.org to apache2.conf. Apache is working locally (I get the `it's working' screen at [URL]). However, I cannot access my computer from an external computer by going to [URL], which is equivalent to [URL] -- [IP address changed slightly for privacy] Here is a screenshot to my router settings. I disabled the filter for port 80 on the router. here shouldn't be a firewall, unless it's automatically installed with ubuntu 10.4. (sudo ufw status says `inactive'.)
I checked my ports from [URL] and indeed port 22 is open (ssh-ing into my computer externally is not a problem), whereas port 80 is closed. What step in opening up port 80 am I missing? (I also made sure my ISP isn't blocking port 80.)
I would like to test myself if port 5060 is open for UDP packets.
I got a few shell accounts outside of my ISP that run Linux or different BSDs. Does someone know a common program where I could send UDP packets to port 5060 of the IP address that Virginmedia assigns to me and then I would need a program on a PC within my network who reads them _if_ they get through.
Background of all this is that my VOIP phones from two different VOIP providers are offline since last Monday.
One service provider confirmed that another VOIP client is online with the same service provider Virginmedia but in a different area.
So, while I don't know how long does it take that someone from Virginmedia can tell me if their port 5060 is open for UDP, I would like to find out myself in the meantime.
I am running RHEL 5.3 and attempted to open port 4470 for an application that will use the port. I used the graphical interface to open the port, just as I have for other ports such as 4750.I can telnet to the server with:telnet server 4750
If I try the other port that I'm trying to open:telnet server 4470
I get "Could not open connection to the host, on port 4470: Connect failed."I have restarted the network and iptables services.I have turned off the local firewall and it still did not work.
needing to open a port in ubuntu, then use it for my VirtualBox Pc.My VirtualBox is running - Windows XP I have a router connected to my network - Linksys WRT54G Now lets begin, I have tried opening via there router homepage. But when I go to [URL] and test port 4900 is still says that it is closed.
View 3 Replies View RelatedNo matter what I do, i cannot get port 3100 to open. This is for a new MMO i am CBT on. I know it works on windows because that is how I installed it and played. But I prefer being on Linux. Majority of all other MMOs work fine. Just this one has to have udp 3100 open.
The following is a rough output of all the methods I have tried with no success. As you can see I have done some extensive research first before posting here.
Now its become a lil bit of an obsession.
I cannot get the following command to work:
And yes I tried the "spaces" in different places thinking that was the prob. So i cannot see if 3100 is in the list or not
I eventually turned on the firewall "ufw enable" add the port there, and output:
Some references
[url]
Firewall stuff: [url]
I even manually went into the router and turned it on there.
I add these lines for startup purposes.
Do I need to do something in "wine" ?
I feel i am starting to repease myself
results of "iptables -L"
Code:
I have an n900 phone and I'm trying to ssh to my desktop but I'm getting an error:
ssh: connect to host 58.xx.xx.xx port 22: Connection refused
I recently started using a router for I wanted to connect to net even with n900. I've tried to open the port from the setup page of the router however it doesn't seem to work. (find below the screenshot of setup page).
I've tried to ssh through slackware I've got as a virtual machine and I have the same problem although I was able to ssh through slackware before I started using the router.
how do i enable or open port in the iptables
View 14 Replies View RelatedI think port 24800 is firewalled in my linux machine. i tried synergy to sue as a server in linux and doesnt work. i tried from the windows computer and works!
So... I telnet (from linux) to an address: telnet 192.168.0.1 24800 and the time is out (so a firewall is blocking this port).
My simple question: How do I open this port so i can get the synergy server in my linux box?
I have a iptable as firewall, I want to open incoming of port 8080 so I use "# Allow forwarding of incoming Port 8080 traffic" but it didn't work? how can I open just incoming of port 8080?
View 3 Replies View RelatedRecently I discovered that we were accidentally running a POP server (port 110), when we only should have been running the encrypted version thereof (port 995). This wouldn't have been a problem if the port was blocked in the first place.Isn't the default iptables setup on CentOS to block unspecified ports? Specifically, this line from /etc/sysconfig/iptables
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
Right? Well, this doesn't seem to be working for me. I added some rules to allow additional ports and commented out a couple (crucially port 110), but for some reason, port 110 is open.Here is /etc/sysconfig/iptables and the output of iptables -L below that:
# cat /etc/sysconfig/iptables
# Firewall configuration written by system-config-securitylevel
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
[code]....
Why isn't "-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited" doing what I think it should be doing?
I am getting the hang of IPTables.I've setup to open certain UDP ports but they simply refuse to show when I iptables -L.
iptables file:
$IPT -A INPUT -p udp --dport 13000 -j ACCEPT
$IPT -A INPUT -p udp --dport 13001 -j ACCEPT
[code]....
Transmission says my port is closed. If I google the problem, it just gives me advice on how to open a port in Windows OS. There's no firewall in Ubuntu 10.10 by default, right? There isn't any router used neither. I'm living in a dorm. I just plug the LAN cable in the box fixed to the wall.
View 3 Replies View RelatedSo, I've installed and configured OpenVPN on Ubuntu server 10.04, but I can't connect to it. When i try connecting from another ubuntu machine it's "connection attempt timed out" and i can't seem to fix it. I think the problem is that port 1194 (which i've configured openvpn to use) isn't open. I've created iptables rules,Here are the rules:
Code:
sudo iptables -L -nv
Chain INPUT (policy ACCEPT 1033K packets, 58M bytes)
[code]....
I need the port 27015 to be open. I've opened it in iptables :
Quote:
iptables -A INPUT -p tcp -i eth0 --dport 27015 -j
But when i try :
Quote:
netstat -nan
The port 27015 do not appear as "LISTEN".
how i can open port 4444 in my system and in the router of my ISP cuase i used it to download and i dont to be blocked from ISP
View 2 Replies View RelatedI've been working and researching this for about a week now and I still haven't had any luck. Basically, I have been trying to open port 3306 to allow connections to my MySql server.
i've added the rule into iptables, saved and restarted that i've added the rule into my router. and I have removed "skip-networking" from the my.cnf file and added the blind address in, I'm trying to get this all to work on my LAN, but it doesn't seem to work, I've also restarted the entire server and then port scanned it from outside and inside the networking and it still tells me that 3306 is closed.
I did however i had some luck when I entered the Ip of the machine that would be sending data to the server but then PROFTPD stopped working and the port was open :/ im not really sure what ip should be in there but another thread from another forum said to enter the ip of the machine that mysql is installed on.
so currently its 192.168.0.2 which is the static internal address of the server.
every machine on the network has a static ip and all the rules have been added to each firewall, i.e. server and router firewalls.
ill pop my "my.cnf" under this to see if anyone can find a mistake,
Code:
# This will be passed to all mysql clients
# It has been reported that passwords should be enclosed with ticks/quotes
# escpecially if they contain "#" chars...
# Remember to edit /etc/mysql/debian.cnf when changing the socket location.
[Code].....
I would like to Close/Open port 21 using command line. I have an FTP server and I don't want to have the port open all the time. I need only two hours by week to be open port 21 from outside to inside.So I need to know the command line for opening and closing the port 21 then I will implement this in a script into cron.hourly.
View 2 Replies View Related