i have to deal with reverse proxy issue and want to access few LAN devices having port 5900 and 9999, what exact steps i have to follow to allow this port in fedora firewall.
View 3 RepliesI have a problem sending of file attachment using Instant Messengeri have a firewall using firestarter, if i used outside firewall they can able to recieve my file in instant meesenger but if i used firestarter it always cancelled my sending of file attachment....
View 3 Replies View RelatedI can't port forward to ftp behind my firewall, I tried several attempts but none worked.
Can anyone help me solve this?
I am trying to make a vnc connection from pc #2 to pc #1. Pc #1 is a debian pc behind a zyxel router (P-2602HW-D1A). Pc #2 is a windows xp pc another place at the internet.I have configured the zyxel router to forward incomming trafic on port 5902 to the local ip-adress of the debian box. The debian box is running a vnc server, listening on port 5902.But i dosn?t work.I have tryed to scan the zyxel routers ipadress on port 5902 from the internet, but the scanner says that the port is closed.The vnc server on pc #1 is working fine on the local network. I can connect to the server from a pc on the same side of the zyxel router.Is it deffenitly a router problem, or could it have something to do with debians own firewall?
View 2 Replies View RelatedI want to open the port 18680 on my remote Fedora 14 machine. I didsudo iptables -I INPUT -p tcp --dport 18680 -m state --state NEW,ESTABLISHED -j ACCEPTsudo iptables -I OUTPUT -p tcp --sport 18680 -m state --state ESTABLISHED -j ACCEPTsudo service iptables saveThe status returned is OK.I have also opened the port on my security group on Amazon. Also, I rebooted the machine.When I use the browser to view the application running at port 18680 the browser cannot connect.
View 1 Replies View RelatedIf I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View RelatedI want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
Currently Im having a syslog server that consolidate firewall logs on port 514 udp. Im also having a IDS device that I wish to push its logs to this particular syslog server so that I can retrieve my IDS logs on this server as well.
Is it possible to do so?Having syslog listening on port 514 for both firewall and IDS logs? If it is possible will the logs be recorded in a single log file?Or will it be recorded in a separate log file ie. firewall.log, IDS.log etc?? I wish to have them in separate individual log files or else there will be hard time segregating the log entries in a single file. Can anyone advice on how to achieve this??
I want to open port 2700 on my firewall but I don't know how I try with Code:iptables -A INPUT -i eth0 -p tcp --sport 2700 -m state --state ESTABLISHED -j ACCEPT But the port is not open I see the firewall configuration with the command setup . I use CentOS 5.3 here a screen of my configuration :http://upbg.net/out.php/i3537_sshot3.pngCurrently my firewall is off because I don't know how to turn on 2700 when the port is open I will turn on firewall .If I write 2700 in other ports field will 2700 be open ? Before 1 month I try but the port was not open . I have only 1 last question will firewall reduce the load of the my server now mysql use many CPU % and I just don't know why
View 14 Replies View RelatedI am learning to setup firewall in my home for that i have selected four system(sys1,sys2....sys4) for testing .I have configured sys2 to act as a firewall with two NIC. sys3 and sys4 are inside the firewall . sys1 is not connected to firewall for testing purpose.
the IP assignments are follows :
sys1 : ( fedora, not connected to firewall i am thinking, But i am not sure )
IP : 192.168.2.1 ,
gateway : blank
dns1 : blank
dns2 : blank
sys2 firewall ,IPTABLES )
code....
what happened is that sys1(not connected to firewall) can ssh to sys4(connected,inside firewall),since the rules are written not to ssh form sys1 to sys4..
then I came to know whatever the request I give, It directly goes as sys1 --> sys4. Not as sys1-----> sys2(firewall)---> sys4 .and the firewall is not filtering and processing anything for both inbound and outbound (i think it's my mistake some where). the requests are directly going inside without firewall.
nmap is showing a port as closed. I have the firewall stopped on both hosts.It shows as closed on localhost as well.The process that's listening to that port is not started from xinetd so i doubt hosts.allow/deny is the issue.I can't help but feel that I'm forgetting some other access control mechanism.Both hosts are RHEl5.4
View 3 Replies View RelatedI just installed Mandriva 2010 and set up the interactive firewall via the MLCC. I set it up not to allow any services to connect (didn't check any boxes). However, when I check my system using a port scanner (shields up at www.grc.com) it says that port 23 is open. Does anyone know why this would be and how I can close it When I look at the daemons running I notice that iptables and ip6tables are 'stopped' although shorewall is running - is this correct? I (perhaps wrongly) thought that iptables needed to be running in order for the firewall to work properly.
View 2 Replies View RelatedI have setup sshd_config for port 3210! I have difficult setup the iptables firewall to allow ssh on port 3210! i always enter this:
iptables -A INPUT -p tcp --dport 3210 -j ACCEPT
iptables -A OUTPUT -p tcp --sport 3210 -j ACCEPT
but after i restart ssh, the system do not allow port 3210... why? do i forget something?
Jst to tryout ufw I tried to close port 80 on my pc. I'm using Ubunutu 9.04. I sudo ufw enable sudo ufw deny 80. But nmap localhost shows port 80 open why? How can I close it? I will need to control some ports on my next server.
View 2 Replies View RelatedI have properly configured my router to open a port for Transmission and Vuze. The OpenSuSE firewall settings are somewhat confusing, however. How do I add a port specifically for the BT protocol? I know it's the firewall causing issues, because when I shut it down, my BT apps roar to life, and die with a whimper when I turn it back on. In Ubuntu, opening a port in the router is automatically configured in the firewall; that is apparently not the case with this distro.
So, when I go to Yast Firewall, I see "allowed services" under the tabs available. When I hit that tab, I see a dropdown menu that contains services such as NetBios Server and Samba Server. Am I choosing one of those available and adding a port to it? Am I adding a custom service via the Advanced settings, and if so, why isn't there a way to label the service so that it shows up under allowed services?
I used to have Opensuse 11.0 and Vuze 4.0.2 and both were working great. Recently I upgraded to OpenSuse 11.3 and installed Vuze 4.5.10. I did not change any configuration in the ADSL router but now I could not get the smiley icon to go green. I followed all the steps given here: A Quick Bittorrent Guide (with screenshots). It doesn't work. so I modified FW_ROUTE and FW_MASQUERADE to yes in /etc/sysconfig/SuSefirewall2. That also does not work. What did I miss here? My ADSL router is DSL-2640T.
View 3 Replies View RelatedIs there a firewall I can install that will only let certain MAC addresses through on a certain port?
View 2 Replies View RelatedI have a computer which has a public IP.My ISP has allowed only port 22 for my machine to be accessed outside from internet.I want rest of my computers which are connected to this machine be accessible via SSH on internet.I can configure IPTABLES to route different ports to internal machines but since ISP has given only one port for the gateway how can I go for it any guesses. I came across some thing reverse SSH tunneling but that has to keep the connection alive all the time at gateway I want my trusted people to be directly able to access the machines on LAN to which they have account to login in this scenario.
View 3 Replies View RelatedMy host is blocking port 3960 which I need to use for an SVN server, they are telling me that I will have to install my own firewall. I've not done this before and am not sure of what to do or whether anything I can install will be enough protection.
View 2 Replies View RelatedI installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies View RelatedIn the firewall, I opened port 5900 for TCP traffic. Now the console is displaying packet information whenever a connection is made. Why does it send a message to stdout/stderr for an allowed connection? How can I stop it? Logging level is set to critical only, and not-accepted packets should only be logged for the internal and DMZ zones.
View 1 Replies View Relatedi am using 9.10 karmic. Firewall is enabled. added ports with ufw allow [portnumber], and i still cannot connect to a port number. iv tryed ufw allow ssh/tcp but that does not work. the ports work when i disable the firewall and i dont want to do that.
ufw is available in all new installations of Ubuntu since 8.04 LTS, but is disabled by default. The standard Ubuntu installation has a no open service ports policy, so enabling the firewall by default doesn't gain any extra security in the default installation, but could provide confusion for people new to Ubuntu when new software that is installed does not work because of restrictive firewall rules. As a result, when first adding ufw to Ubuntu it was decided that users must 'opt-in' to using the firewall. In Ubuntu 9.04 and later, you can enable ufw during installation using preseeding. See /usr/share/doc/ufw/README.Debian for details.
Got 3 computers connected by ethernet to a router modem. At this router modem only port 80 is forwarded to a web server (one of the 3 computers). Now I realized several times a port scanning attack displayed at interactive firewall of Webserver ( Apache at Mandriva LINUX ). Actually the message is port scanning attempt of heanet (actually this names are different mostly). I wonder how to figure out is this portscanning attack possible through port 80 or is the modemrouter (Draytek VIGOR) misconfigured, compromised or one of the other 2 machines (Windows) are compromised and attacking the server inside intranet?
View 2 Replies View Relatedtell me the command for iptable rule to add in Chain RH-Firewall-1 to block ftp port & the ftp server was configured in public ip address,i searched in google but i did'nt get the exact command for iptables rule in Chain RH-Firewall-1.
View 3 Replies View RelatedI have a question, on my firewall at work I am seeing a constant flow of denies from many different source IP addresses, of tcp/udp destination port 53372 & 53375.What in the world is that, and why these two ports over and over
View 1 Replies View RelatedHow can I make iptables allow my windows client to see my PC / smb shares? When I turn off the fedora firewall it just works fine, but how can I manage smb in a more secure way via iptables to work?
Code:
iptables -A INPUT -s 192.168.0.0/255.255.255.0 -j ACCEPT
But where do I get the correct address from? Will this example allow only 192.168.0.0 (is this a valid IP at all, usable by any PC? ) or anyone in the network (aka 192.168.0.*) to access my share?
The firewall in Fedora 12 seems to block UPnP by default, but opening port 1900 for UDP, as I have seen suggestedes not resolve the problem.have the following three scenarios:Firewall Enabled: Transmission cannot open a port by UPnPFirewall Enabled (1900 UDP allowed): Transmission cannot open a port by UPnPFirewall Disabled: Transmission opens a port via UPnP fineAny ideas? Yes, the port that I'm trying to open is also allowed. Router is a Linksys BEFSR41 v4.3, should you care
View 6 Replies View RelatedEven though I've set up HTTPS to be trusted, it still blocks my school's https site: "mnsu.edu/eservices" same with SAMBA and SSH.
If enter the GUI and authenticate as root, change anything and apply, then exit: it works fine and so does SAMBA. However, after restarting, everything stops working again.
yet secure firewall configuration that doesn't require any login or headaches.
Since I installed FC11 I can't get vpnc to work (I always getno response from target").Also I can't ping any external IP even with the firewall disabled.What I see strange is that I had the same configuration in FC10 and the router configuration seems okay to me:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0
[code]...
I want to write a custom rule to allow all connections to the ip addresses on my local network (192.168.2.2 through ...99) but I don't know how. I know adding a custom rule asks me to read a file and put it in "iptables" format, but I don't know how...
View 5 Replies View Related