My past few weeks trying to cache the use frox, but never managed to run frox correctly. I need a guide for installation frox (ftp proxy or otherwise) that I can understand, because I'm still just learning. I use a superbly managed using squid for web proxy using port 3128
View 1 RepliesRHEL 5 is my proxy server. i want to remove temp files and cache . How do i remove cache and temp files.
View 3 Replies View Relatedwhat i need, I got two servers for about 4000 users and 300 servers and well the guy never setup dns caching right, so im redoing it. Now my goals
1) DNS cache
2) Transparent Squid Cache only
3) Load Balance - at switchlevel
Upgraded Hardrives to SSD 2x32gb each server 4gb of ram 2x Dell poweredge 850's - p4 2.8 (single cores) So any advise , pointers , expeirnces and best ways to do this being both server will do both dns caching and squid! Also is bind9 the best for this?? i seen stuff about DNSmasq what performs better( i dont need DHCP)
I am using Cent Os 5. I want to know that is there any way to check that how much size of squid cache directory is full? Normally when squid size will reach upto 2GB then I have to clean it.
# cache_dir ufs /var/spool/squid 2000 16 256
I assign 2000 MB to the cache size. One month have been pass while squid is running but i am unable to know how to check the current status of my squid cache size.
I installed squid cache on my ubuntu server 10.10 and it is work fine but i want to know how to make it cache all files like .exe .mp3 .avi ....etc. and the other thing i want to know is how to make my client take the files from the cache in the full speed. since am using mikrotik system to use pppoe for clients and i match it with my ubuntu squid
View 1 Replies View RelatedI use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed. I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.
View 2 Replies View RelatedIs there a way to create a cache repo so when we update all our machines in Ur school, ones one of the machines do the update, all the other machine in our network will have the updates from the cache server.
we did something like that with APT and ubuntu
any one are implementing Transparent Cache in bridge mode. after googling i found article but its not working for me. any one have done this before ? [URL]
View 4 Replies View RelatedI managed to install xdebug from pecl, using the php-pear package from Centos base.
However, when trying to install PHPUnit i get an error saying I need at least PEAR >= 1.8.x
Has anyone managed to get a later version of PEAR running on Centos please?
im using a lease line on real ip for internet connection in my office.i have shared my internet conetion with a squid 2.6 stable6. i m having almost 200 pc in my office.since last few days my squid is creating a problem.as soon as i restart it ,it work fine but after a few minute it becomes extremely slow ..it almost dies.when i go to its cache log i found the error that your cache is running out of file descriptor...once i increased the no of file descrptor from 1024 to 4028 , the problem temporaily sorted out but after a few days same problem is repetaed ....and still the problem exist
View 3 Replies View RelatedI've been struggling with this for a couple of days now. I'm trying to setup a reverse proxy with SSL. The config works when it's not using SSL, but as soon as I setup the virtualhost for 443, I get a ERR_CONNECTION_REFUSED in my browser.
The setup is that it's a CentOS 5.6 running Apache 2.2.3. I was configuring it via this guide: [URL]
This server is acting as a reverse proxy for a Windows server running Apache. Currently, I'm just trying to get the manager page from the Windows server to go through the reverse proxy. Here's the virtual host section of my httpd.conf file on the reverse proxy:
<VirtualHost *:443>
ServerName aspwebview.vtinfo.com
SSLEngine On
SSLCertificateFile /etc/httpd/ssl/star_vtinfo.com.crt
[Code]....
Thoughts? Is there anything I have to do on the Windows server (maybe in the connector section of server.xml)?
While configuring the yum through proxy i was configures with some address(10.x.x.x). after the proxy address has been changed(172.x.x.x).according to new proxy address i made changes in all locations in my system. but when i am trying to download through command line still it is trying to connect old proxy address(10.x.x.x). finally i come to know that, still some location old proxy address(10.x.x.x).is there. how to troubleshoot this issue.(how to find the location) i was try to debug find the output below
[Code]....
I am attempting to use yum behind a MS Proxy. I am receiving the following error:
#yum list
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
http://mirror.centos.org/centos/5/os/i386/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again I beleive the yum.conf is configured correctly:
[Code]....
how do i configure squid proxy server in centos 5.5 final text mode only to block facebook from 9am to 4pm
View 3 Replies View RelatedWe have one squid proxy server running on CentOS 5.3 64 bit with Squid 2.6. it works well for me.
but my problem/question is :
Is it possible to skip proxy for all Internet addresses? and only allow proxy if clients are accessing external addresses?
right now users have to explicitly say in the browsers .. BYPASS PROXY SERVER for local addresses after check the use proxy server
and address has to be mentioned. most users are non technical so they don't use this option or put wrong setting in bypass proxy option
I'm trying to set up a server for an NPO who connects to the Internet through an internal proxy (Websense). I can't access the Internet unless through the proxy.
Since it's a server I did not install a GUI so I'm wondering how to connect the new server to said proxy server. I have the IP address, port number and username-password for the proxy server. The new server has a static IP address and is ready too go!
today i encountered centos 5.5 final server with a squid configured to block facebook from 9am to 4pm. i have tried to follow up the steps but am stack where time restriction is done and there is no proxy configuration done in the browser. the ip address of the server is being used as the default gateway.
View 2 Replies View RelatedI am using CentOS 5.5, I installed squid3 in that machine. From my users machine i am not able to use our webmail address. Outlook shows pop3 error.cannot ping webmail address inside proxy.
View 1 Replies View Relatedi have a website named [URL]... now i want to access this website using proxy server(squid,or etc...) under my personal server named [URL]...means that [URL]...
View 4 Replies View RelatedI have configured the proxy server. I want to observer users's download information. What should I need to do? Shall I install squint? what is the process? How do I monitor the users?
View 1 Replies View RelatedHow To: Load Balancing & Failover With Dual/ Multi WAN on Linux proxy server I have 3 WANs connection (2 ADSL and 1 Wimax). And 30 clients on LAN.
eth0 connect with Wimax
ip= 172.23.x.x
eth1 connect with ADSL1
ip=10.10.6.x
eth2 connect with ADSL2
ip= 10.10.5.x
eth3 connect with LAN
ip=192.168.1.x
how to do Load Balancing & Failover With Dual/ Multi WAN on Linux proxy server.
I'm trying to setup a Centos 5.6 Squid Proxy Server with Content Filtering & Antivirus Scanning Incoming HTTP Traffic from the Internet
I then proceeded to setup an configure the Proxy Server, i was able to test and confirm that Squid and Dansguardian Content Filter is working, however i dont know if Clamav is scanning HTTP traffic before it hits the client/server. Is there a way i can check if the Antivirus scanning is working.. is there some log file or real world test i can i can do to confirm that Clamav is scanning incoming traffic or even blocking potential viruses ??
Anyone who has squid proxy server with Clamav configured and its working can share there settings/setup with me and how they tested it ??
Currently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
I am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.
I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?
Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?
Is there a way to limit the time an instance of a service can run? For example, I want to limit all telnet sessions to 30 mins. Users will be automatically logged out after 30 mins.
View 5 Replies View RelatedI'm completely new to Linux/Ubuntu, but I managed to create a FTP server by using apt-get vsftpd or something.I followed a tutorial and modified a file called vsftpd.conf.I tried to disable all kind ofblocking/permissions. From a Windows client, I can connect to it without any login (I enabled anonymous) and I can download from it, but I am unable to modify it or upload files. Unless there is a better way to transfer files between the computers, how can I enable writing on the FTP server?
View 3 Replies View RelatedI'm attempting to set up a VPN server on my box using the nifty HowTo posted here: [URL]
My setup is as follows:wifi0 --> Internet; managed entirely via nm-applet (NetworkManager)
Where I'm running into trouble is in the creation of a bridge interface (br0) to bridge future VPN clients to my local network.
The guide(s) say that I need to screw around in /etc/network/interfaces to setup br0 and [eth0/wifi0] accordingly. The problem is that when I specify a configuration of any sort for wifi0 (my only choice for a network uplink), it disables nm and I am unable to configure my wifi in any sort of sane way after reboot... Further info: this "server" doesn't move, and always always connects to the same wifi hotspot that is also nailed in place.
managed to screw up the ownership of many directories on a remote server whilst installing a piece of new software. Basically I have set all ownership from / downwards to apache:apache.
Spotted the error quite quickly and managed to abort it, but am now unable to change to root to put anything right. Is there any way to restore ownerships of the underlying Slackware to 'factory default' as it were? Had a quick google and found some links for a script that is supposed to work, but it appears broken,
I would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedI use two ramdisks one mounted in /tmp the other mounted as /ramdisk /tmp is used as a temp store for apps which need temp space /ramdisk is used to store copies of read only databases for processing. Files in here can be 10-500Mb in size.
I suspect that the O/S may be caching the files stored in /tmp and /ramdisk and thus is not efficient. How can I check if the O/S is caching ramdisk files and if this is the case how can I prevent it? Is there an option to say 'dont cache /tmp' ?