Ubuntu Networking :: OpenVPN Server With Nm-managed Wifi Uplink?
Feb 7, 2011
I'm attempting to set up a VPN server on my box using the nifty HowTo posted here: [URL]
My setup is as follows:wifi0 --> Internet; managed entirely via nm-applet (NetworkManager)
Where I'm running into trouble is in the creation of a bridge interface (br0) to bridge future VPN clients to my local network.
The guide(s) say that I need to screw around in /etc/network/interfaces to setup br0 and [eth0/wifi0] accordingly. The problem is that when I specify a configuration of any sort for wifi0 (my only choice for a network uplink), it disables nm and I am unable to configure my wifi in any sort of sane way after reboot... Further info: this "server" doesn't move, and always always connects to the same wifi hotspot that is also nailed in place.
View 1 Replies
ADVERTISEMENT
Nov 3, 2010
I use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed. I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.
View 2 Replies
View Related
May 15, 2010
I got a dedicated server ; datacenter told me that I have a 1000 Mbps Public & Private Networks uplink/downlink . How can I check from console if they are saying the true ?
Also , how can I get info about the server network card from console ?
View 1 Replies
View Related
Apr 5, 2010
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
View 1 Replies
View Related
Feb 13, 2010
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
View 6 Replies
View Related
Sep 6, 2010
Followed this guide to the letter:[URL]..
Tried to run command:
sudo /etc/init.d/openvpn restart
And just get a fail returned.
This is what the log-file says.
[Code]...
It says init bridge br0 does not exist. Do I need to create it in the network config or something?
View 6 Replies
View Related
Mar 2, 2010
i recently rent a VPS and installed with CENTOS 5 64bit, i followed a tutorial to install openVPN to bridge traffic to my windows machine.
View 3 Replies
View Related
Jul 18, 2010
New ubuntu desktop user here. I've been working with Ubuntu servers for over 3 yrs, using Windows as clients. I have OpenVPN running on an ubuntu 10.04 server, and it has worked well with Windows OpenVPN clients connecting. I took those same settings and applied them to this new install of Ubuntu 10.04 Desktop, and now openvpn seems to be failing when we get to the routes (I wrestled with the network-manager "secrets" issue for hours, but that works now).
I performed the following:
sudo openvpn --config fogbank-ny1.ovpn
--all is well, we're connecting/yay then *screech* FAIL--
Code:
Sun Jul 18 07:17:14 2010 PUSH: Received control message: 'PUSH_REPLY,route 10.8.0.0 255.255.255.0,redirect-gateway def1,dhcp-option DNS 10.8.0.1,route 10.8.0.0 255.255.255.0,topology net30,ping 30,ping-restart 600,ifconfig 10.8.0.10 10.8.0.9'
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: timers and/or timeouts modified
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: --ifconfig/up options modified
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: route options modified
Sun Jul 18 07:17:14 2010 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Sun Jul 18 07:17:14 2010 ROUTE default_gateway=192.168.10.1
Sun Jul 18 07:17:14 2010 TUN/TAP device tun0 opened
Sun Jul 18 07:17:14 2010 TUN/TAP TX queue length set to 100
Sun Jul 18 07:17:14 2010 /sbin/ifconfig tun0 10.8.0.10 pointopoint 10.8.0.9 mtu 1500
Sun Jul 18 07:17:14 2010 /sbin/route add -net <mypublicip> netmask 255.255.255.255 gw 192.168.10.1
Sun Jul 18 07:17:14 2010 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.8.0.9
Sun Jul 18 07:17:14 2010 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.8.0.9
Sun Jul 18 07:17:14 2010 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.9
Sun Jul 18 07:17:14 2010 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.9
SIOCADDRT: File exists
Sun Jul 18 07:17:14 2010 ERROR: Linux route add command failed: external program exited with error status: 7
Sun Jul 18 07:17:14 2010 Initialization Sequence Completed
I am using the suggested openvpn routes. If I connect from Windows (actually the .ovpn file is taken directly from the working windows machine).. all is well, routes work fine all traffic is routed thru the VPN -- same way it's worked for over a yar. I assume that this is what is causing networkmanager to fail as well. those logs indicate that it has connected to the vpn, but is probably stopping when it gets to routes.
View 1 Replies
View Related
Oct 26, 2010
I have an Ubuntu server that is currently running Ubuntu 8.10. I was thinking of making it a VPN server for my iPhone and also for my laptop whenever I'm outside and need to access internet over insecure wireless networks. Now that part should be easy I found several guides on how to configure OpenVPN server, as well as enabling clients on iPhone, and OSX.
However, the things is that my server is currently a OpenVPN client also, I have a paid tunnel set up to bypass my ISP blocking incoming traffic on various ports. Is it possible to keep this setting but still enabling a VPN server? Essentially causing traffic from my external device to go in through my tunnel to the VPN server, and then out through the external VPN provider.
View 2 Replies
View Related
Oct 30, 2010
I configured succesfully openvpn server, but the service won't start at boot !I thought openvpn automatically starts al the *.conf files in the /etc/openvpn folder ?on my personal laptop the service automatically starts all the .conf files in the folder. But on my server with server.conf file it won't start at boot. I have to start the service as root
View 1 Replies
View Related
Mar 10, 2011
I currently have one of our clients set up to use a routed VPN for their 5 laptops to connect to the server remotley. And this works brilliantly. They are about to bring on a remote office that will need a VPN connection back to the main office, so I was going to set up a bridged connection between the two sites (and possibly more sites in the future).
So my question is whats the best way to go about this? Can I have one instance of OpenVPN running with tun0 set up for a routed connection to the laptops and add a second tun (tun1) to the config that will be for the bridged connection between the sites? Or am I going to have to run multiple instances of OpenVNP, one for the routed and another for the bridged?
If routed and bridged have to run in seperate instances, will I have to add another instance for each new remote site that needs a connection? Can a bridged config connect to multiple sites, or have multiple tuns in the one config?
View 3 Replies
View Related
Jun 16, 2011
I have (seemingly regretfully) finally upgraded my Fedora Core 7 linux machine that has served me so well for the past decade. One of the final pieces to put in place was my Openvpn config (which was running flawlessly on my FC7) which I cannot get to work.
Here are my steps.
1. Disabled SELinux
2. Added the following entry in my iptables: (although I've stopped iptables to help troubleshoot)
-A INPUT -i tap0 -j ACCEPT
-A INPUT -i br0 -j ACCEPT
-A FORWARD -i br0 -j ACCEPT
3. Yum installed openvpn and bridge-utils (btw I'm using bridging)
4. Configured my bridge-start script as such:
#!/bin/bash
# Set up Ethernet bridge on Linux
# Requires: bridge-utils
# Define Bridge Interface
br="br0" .....
5. Configured my openvpn server conf as such:
proto tcp-server
port 5990
dev tap0 .....
When I execute my bridge-start script it creates the br0 and tap0 then all connectivity vanishes (I can only ping my gateway 10.0.0.50) - internet and any other addresses time out.
View 6 Replies
View Related
Jan 8, 2010
When the centos is running a vpn server, there 's a client connecting. The connection can't be seen by netstat -tunp
View 4 Replies
View Related
Feb 4, 2010
Running Linux Fedora 10 on an Intel Core 2 Duo PC. Runs great. We are trying establish VPN between a client and server on the same LAN. The network is a standard fast ethernet, run great. We are trying to install OpenVPN server, but having a little difficulty. Key and certificate builds seem to execute without a problem. But when we try to start the service we get [FAILED]. I've attached a copy of our procedure.
View 1 Replies
View Related
Feb 15, 2010
I'm trying to connect OpenVPN server using shell command.
I've installed all needed packages (I guess)
if type
Code:
sudo openvpn client.ovpn
and i've got messages:
Code:
Mon Feb 15 12:29:25 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
[Code]....
but i can't see tap0 interface and cannot ping any address at remote location.
I tried this config file at Windows OpenVPN client and all works fine.
View 2 Replies
View Related
Sep 28, 2010
I've been the las 4 days setting up my first VPN (OpenVPN bridged). The server is up and running OK but when I try to connect I've got this message in the client log.
Quote:
TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
TLS Error: TLS handshake failed
[Code].....
View 4 Replies
View Related
Nov 23, 2009
This was working and stable on f-10 and f-11. Fresh f-12 install including openvpn, Copied /etc/openvpn/* to new system as root from working f-11 syatem. /etc/init.d/openvpn start (and stop) works as advertised HOWEVER when set to start at boot using chkconfig or Services Configuration program, openvpn does not start. I must manually start it every time. When started, it does work without error messages in the log.
I tried removing the NetworkManager-vpn module with no effect. Thought it could somehow be overriding the auto startup of openvpn at boot.
View 6 Replies
View Related
Sep 9, 2010
I'm setting up a VPN with openVPN on a debian lenny server. I successfully installed it in the server, then created the certificates and both client (winXP) and server config files. For the client I use openVPN gui. I tested the tunnel and everything went just fine. I even can ping the openVPN server from the XP client.But thats all. I can't ping any machine behind the openvpn server.Some facts that you may find useful to help me with this issue are:
- The openVPN server is not the default gateway of the LAN. The dg is a pfsense server
- I dont have iptables enabled (policy of all chains are ACCEPT).
- I have configured ip forwarding (echo "1" >/proc/sys/net/ipv4/ip_forward)
[code]....
I have checked and all seems to be OK. I think that the problem is connected with routing the traffic from the vpn to my LAN but I don't know how to do that (besides the push route line in the server.conf).
View 11 Replies
View Related
Nov 24, 2010
How to login multiple client pc on the same network using via openvpn server from client side
View 1 Replies
View Related
Dec 18, 2010
I have a openvpn server configured and users are using from remote location. I got some errors in the /var/log/messages file as:PHP Code:
Dec 18 16:09:37system openvpn[7221]: x.x.x.x:58983 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Dec 18 16:09:37 system openvpn[7221]: x.x.x.x:58983 TLS Error: TLS handshake fai
[code]....
View 1 Replies
View Related
Mar 20, 2009
Code...
What I can ping
Host A -> Host B
Host B -> Host A
Host A -> Router B
Host B -> Router A
Host A -> OpenVPN B
Host B -> OpenVPN A
VPN Server -> VPN Client
VPN Client -> VPN Server
What I can't ping
VPN Server to any client side host local address
VPN Client to any server side host local address
I have searched and searched for this but can not find any answers. Why can I not ping Host B from my OpenVPN server?
View 1 Replies
View Related
Jun 7, 2011
I try to connect to my server (whose IP is x.x.x.x below) from my laptop. I have no idea why openvpn client won't work this time. It works fine in win7 before. I re-installed openvpn but it doesn't work neither. Then I searched for this issue, find that it is possibly caused by disabled DHCP Client service. I checked, and found it was enabled. Still won't work after restarting dhcp client service.
Basic Info:
OS: Windows 7
OpenVPN client: openvpn-2.2.0
DHCP Client Service started.
The following is the log during connecting:
Code:
Wed Jun 08 01:55:16 2011 OpenVPN 2.2.0 Win32-MSVC++ [SSL] [LZO2] built on Apr 26 2011
Wed Jun 08 01:55:16 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port.
Wed Jun 08 01:55:16 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Wed Jun 08 01:55:16 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
[Code]....
View 1 Replies
View Related
Sep 21, 2010
I have openvpn tunnel setup between two CentOS servers. One of the CentOS servers also acts as a DHCP server for some client computers.
Server A= OpenVPN server
Server B= OpenVPN client (connects to Server A with OpenVPN)
The two CentOS servers can ping each other (172.16.0.0/24) via the tun0.
However, client computer connected to Server B (DHCP server) can't reach 172.16.0.1 (which is the OpenVPN server).
I think I am missing some routing in my "ip route show". Following is the full picture:
What command can I issue to get this fixed? something along ip route add?
There is no firewall service on both end. service iptables stop! I can't bridge eth1 and tun0 as DHCP server might mess up the other side. I can't do a push of "redirect-gateway def1" because then clients loose their IP as they send DHCP requests to Server A.
View 2 Replies
View Related
May 13, 2010
I'm completely new to Linux/Ubuntu, but I managed to create a FTP server by using apt-get vsftpd or something.I followed a tutorial and modified a file called vsftpd.conf.I tried to disable all kind ofblocking/permissions. From a Windows client, I can connect to it without any login (I enabled anonymous) and I can download from it, but I am unable to modify it or upload files. Unless there is a better way to transfer files between the computers, how can I enable writing on the FTP server?
View 3 Replies
View Related
Apr 9, 2011
My past few weeks trying to cache the use frox, but never managed to run frox correctly. I need a guide for installation frox (ftp proxy or otherwise) that I can understand, because I'm still just learning. I use a superbly managed using squid for web proxy using port 3128
View 1 Replies
View Related
Aug 13, 2010
Is there a way to limit the time an instance of a service can run? For example, I want to limit all telnet sessions to 30 mins. Users will be automatically logged out after 30 mins.
View 5 Replies
View Related
Feb 28, 2010
Seems everytime I upgrade wireless quites working.
Anyways, here's the info:-Acer Aspire One AOA150-1997
Quote:
kevin@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code]...
I think that's all that would be needed to help diagnose the issue. I'm kinda new to linux, and this is primarily a music machine.
View 6 Replies
View Related
Apr 27, 2010
I have a problem with my internet connection this is the picture the device is Realtek RTL8187. i didn't know how can i manage this device to work so could you help me i don't have an internet connection in ubuntu right know and i really wanna move to ubntu my verison is 9.10
View 9 Replies
View Related
Aug 25, 2010
I'm getting rather fed up with this Network Manager applet on Ubuntu and its seemingly erratic behavior.I often use my laptop for things like dhcp server to do pxe boot on other machines for netboot installs and other stuff. Often I have to set static address on eth0 etc.I know how to set a static address for eth0 by editing /etc/network/interfaces and all that good stuff, but when I click on the Network Manager applet, it says 'Wired Network - not managed'.I may have deleted it for some reason, but why does it no longer appear, even though eth0 is working?I've also found in the past that changes to interfaces in the Network Manager, such as giving eth0 a static address, do not seem to stick?
View 6 Replies
View Related
Oct 3, 2010
Just purchased a Asus USB-N13, and having follwed a mixture of tutorials, including the readme on the driver disk, i have had no luck in getting this adapter to work.Upon using "sudo iwlist ra0 scan" the adapter can see multiple networks, however device manager is stating that the device is not managed. How can I get this sorted and connect to a network?
View 1 Replies
View Related
