I have installed centos 5.3 and it the X Server is failing.
I have managed to get to cli and update all packages.
I have an ATI Radeon x1600 and Dell 19" Wide Screen 1440 x 900 monitor.
My linux skills are ok but could be better.
I recently had a problem with Proftpd, when execute proftpd return the next error:
# /sbin/service proftpd start
Starting proftpd: [FAILED]
the file configuration is:
I have a service I've made an init script for, and it's added to chkconfig, which shows it "on" in all the correct runlevels. When I start or stop this service using the "service" command all is fine, but it does not start on it's own at bootup. I am currently at a loss to determine why it is not starting. Here is the script:
#!/bin/bash
# chkconfig: 2345 95 10
# description: Start or stop home automation
#
[Code]....
CentOS 5.4
/etc/init.d/dovecot start
Starting Dovecot Imap: Fatal: Protocol pop3 given more than once
I just finished installing CentOS 5.2 x86_64 on a Dell Dimension 3100 (Pentium 4 with 64-bit support). On the first boot, after completing the final config steps (firewall, SELinux, time server, etc), the boot hangs on "Starting xend:". I have completed a successful installation on another Dell machine (different processor), with the same installation options (I recorded all of the steps and followed them for the second installation).
My boot commands in grub are:
root (hd0,0)
kernel /xen.gz-2.6.18-128.el5
module /vmlinuz-2.6.18-128.el5xen ro root=LABEL=/1 rhgb quiet
module /initrd-2.6.18-128.el5xen.img
Sometimes during bootup I get the following error:Starting Dovecot Imap: Fatal: listen(995) failed: Address already in useI tried to figure out what I could with the command lsof -i :995 and this was my output:COMMAND PID USER FD TYPE DEVICE SIZE NODE NAMErpc.mount 2936 root 7u IPv4 9201 TCP *:pop3s (LISTEN)When the system boots without the dovecot error the output of losof -i :995 is as follows:
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
dovecot 3079 root 8u IPv6 9419 TCP *:pop3s (LISTEN)
pop3-logi 3157 dovecot 1u IPv6 9419 TCP *:pop3s (LISTEN)
[code]....
I have a CentOS 5.4 box that I am trying to set up as an OpenVPN server. So I modified the firewall by running the following script:
#!/bin/bash
#
# the following rules will flush out any existing chains
[code].....
When I want to start nfs services ,I get this error, Starting NFS daemon: [FAILED]
View 1 Replies View RelatedI have installed vnc-server on my CentOS 5.6 virtual machine. I can connect to it with a java web browser so it seems to be working. However, I get the following error message when I start, stop or restart the vnc-server process. Quote: Starting VNC server: 1:ken xauth: timeout in locking authority file /root/.xauthkk661q
View 5 Replies View RelatedBrand new to Linux. Sort of got thrown in front of the bus if you know what I mean. The company I work for has a Linux server running CentOS 5.4 Company uses Linux for their Email, FTP and Web Server. Have been here a few years dabbling in and out of Linux and now that the old Admin has left the company.....I need to learn it ASAP. The server has run pretty solid until today.
The email server runs SendMail and SpamAssasin. Received lots of complaints today regarding extra SPAM. Noticed that SpamAssassin was not running. Tried to restart it through the WebMin tools and got the following error: Starting spamd: child process [3956] exited or timed out without signaling production of a PID file: exit 255 at /usr/bin/spamd line 2588.
I installed OS11.4 on my old laptop, Compaq Armada E500., 512MB RAM, ATI Rage Mobility. During installation I chose "minimal server" and added some development packages, lxde and a little more. I chose to start in runlevel 3 which is full networking without X. Still, when computer is booted it tries to start Xorg which doesn't work because of some problem w driver. The start-up seems to stop there, it never loads completely - seems most things in runlevel 3 are not started (see below) I can manually login on laptop and fix it - but never permanently, same thing again after reboot.
I have checked /etc/inittab & yast - both states default runlevel is 3. I have checked services to be started both directly, browsing directory /etc/rc.d/rc3.d/, and with YaST, it is very clear X should not load during boot. But, as said, it does.. I don't really care about the driver problem right now, I can fix that later when I have more time. So how do I stop X from getting started automatically?
More info, if needed: The installation also stopped with message on tty1 "Starting YaST2" and tty8 showing errors with graphics driver (mach64). The system seemed to be installed though, so I simply rebooted (issuing "reboot" from tty2).
[Code]....
I'm not completely sure where it stops, network is configured but keyboard is wrong and mysql & everything after is not started, so somewhere between S02network and S06kbd. I'm going to use it as a server for testing purposes so no X is actually needed - however I do want to have X & lxde installed just in case, my Internet connection at home is terribly slow so I need most things I might need in the future installed today.
I need to copy files over from a Solaris 2.6 box to my machine running Centos 5.3. I have to use RCP since the Solaris box is so old that is the only inter-machine copy command available.How do I enable rshd services on my centos box? Detailed explanation would be apperciated since I am from the ssh generation.
View 5 Replies View RelatedI have tried to install debian 5.0 and 4.0 without any luck. I have both tried virt-manager and virt-install with both debian-501-i386-netinst.iso, and full dvd. I't always gives me the same error:Starting install.Could not find an installable distribution at '/xen/debian-501-i386-netinst.iso'
[Code]...
I've been trying for the past week to install an icecast server on my centos 5 VPS hosted through phurix.
I've tried compiling it, installing it from RPM. but im getting nowhere. Has anybody had any luck installing it, who wouldn't mind explaining how they went about it?
I've searched google for hours on end and all I can come up with is generic cent os 4 guides that just wont work. Im not the best when in comes to linux. I do a great job of copying and pasting to a shell prompt and can use ftp etc.
if this is any use.. heres the last output from my last attempt and compiling it...
[root@vps613 icecast-2.3.2]# ./configure --prefix=/usr/local/icecast
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... no
[Code]...
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies View RelatedWhat i want to be able to do is create a custom kickstart for my centOS 5 server. I want to create a bootable cd that I can pop in my server and basically walk away for 45 minutes and I come back and its fully installed. All the directions I have read so far tell me that I have to create a seperate ks.cfg and then I need my original centos cd to get it booted. Then the cd will ask for where the ks.cfg file is and I have to type the location. I just want to pop the CD in and type in linux_clean or something and have it perform a custom install based on the information and specification in my ks.cfg. How can I go about doing this?
View 1 Replies View Relatedsomebody please tell me whether it would be all right to install xp inside CentOS using VMware or it's better to do vice versa if it is ok to install xp inside centos then at the beginning when i install centos should i allocate all hard disk to this OS and later give some to xp , or initially i should keep some space for xp and install centos in the rest ?
View 1 Replies View Relatedthis is probably something trivial but how can I auto start gdm on CentOS 5.4??I had to perform a text install due to Anaconda having some issues as I'm running Cent on Sun's VirtualBox.I have tried to add chkconfig --add gdm which didn't work, also there is no init.d script either for gdm so not sure if it's in a directory somewhere or if I have to create it manually??IF I run simply gdm from teh cli then everything is ok and starts fine....
View 2 Replies View RelatedI would like to replace default OpenSSH version 4.3 with latest one (5.x). New version do support SFTP chroot, which is something I need.Of course, it can be compiled from source, but it is worst possible option for maintenance, since I do have few servers. Does someone provide RPMs or source RPMs at least ? If yes, what is repository/URL ?
View 3 Replies View RelatedI've got a new server machine: Fujitsu-Siemens PRIMERGY TX150 S6.
I've tired to install CentOS 4.4 linux from DVD. This DVD is OK, because I installed from it a couple of days ago. Installation process starts but after some steps it gives me something like this code...
I try to install SSMTP mail server on Centos 5.4 and I have a following error >>
[Code]....
I recentlly updated my Centos 5.5 to 5.6 usnig yum update, and since then, the QT4 designer cannot be started. If I'm running it (I installed it from source to /usr/local/qt..) the command stuck and nothing happens. The wierd thing is that if I'm running "strace /usr/local/qt/bin/designer4" the program starts.
View 1 Replies View RelatedDoes anybody have any documentation or can assist with any sort of steps on how to install a SSO server on Centos 5.4.We have just over 150 Centos servers country wide and we would like to implement an SSO server to manage the users and their login credentials locally and centrally.
View 1 Replies View RelatedI'm trying to setup local LAMP installation of CentOS 5.6 in VMware for local developing. I installed Apache, PHP, phpMyAdmin from this tutorial. Is there any other begginers step-by-step tutorial for setting up LAMP? I need help setting up FTP and permissions, hot to setup permissions for /var/www/html directory?
View 1 Replies View Relatedwhen i do a paravirtualised install coz fully grey out (how do you get round this) and ftp install path is ftp://192.168.1.1:65354/bie764.iso
i get error:
Unable to complete install 'exceptions.ValueError Invalid install location: Opening URL ftp://tj:tj@192.168.1.1:65354/bie764.iso failed.
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 724, in do_install
dom = guest.start_install(False, meter = meter)
[code]...
does it not accept ftp passwords.. what ftp server program (with autostart so it works with crossover linux as i know no other way start apps with that. can try to insta wine but need rpm) will work
I have install Mandriva 2009 and install apache server but its not strating on default configuration file . What I should do for starting apache . i have tried /etc/init.d/httpd start but apache is not running .
View 1 Replies View RelatedI am running CentOS 5.4 and Postfix. So when I start Postfix server than immediately maillog is starting to grow. And the first lines that I see in it are:
[Code]...
Server is already in several blacklists and I desperately need to do something.
I have centos on Microsoft Virtual PC 2007.
yesterday i updated my CentOS 5.4 with command "yum update" and today it won't to start.
Shows processor error and needs to be resetted.
How to solve this issue??
the start up fails, but a process is left running. these machines are running the latest stable version of Centos 5, and we have been "messing" with the firewall. When I'm logged on through a console, I get error messages that lockd can not contact the server even though the nfs mounted home directories work fine.
View 5 Replies View RelatedI have a fresh install of Cent OS 5.4 and am having a problem with Openoffice application not starting up, word processor, spreadsheet, etc. none of them start.
When I try to open word processor, It just loads for a bit says "starting word processor", then closes.
I uninstalled and reinstalled through add/remove software tool and that didn't help. I read somewhere that selinux causes problems with it so I disabled selinux, restarted, and that didn't change anything.