Does anybody have any documentation or can assist with any sort of steps on how to install a SSO server on Centos 5.4.We have just over 150 Centos servers country wide and we would like to implement an SSO server to manage the users and their login credentials locally and centrally.
View 1 RepliesSetting up a single signon using ldap server ?
View 1 Replies View RelatedI dont know if this is possible or not but here what I would like to do. I have 6 linux server and each has 100GB disk space. All of these 6 box are compute nodes and space are not used really. However, If I can combine 6 servershard disk that will in total 6*100GB gives you quite a bigger space. Is there any tool or ways to mount these drive in one volume instead of mounting individually ?
View 2 Replies View RelatedI've got a bit of a question. My network is laid out like this:
The role assignments are thus:
Firewall - sorts out the passing through to the 3 different networks, and acts as the traffic proxy.
Windows 2003 server - Does Active Directory and DNS
CentOS server - FTP and DHCP
Now, my problem is I need the CentOS server to be able to assign IP address to both networks, however, the CentOS server can *ONLY* be connected via the one interface to the firewall. It needs to assign the Windows 2003 server and the eth0 of the firewall an IP address via static DHCP, but it also needs to able to assign the clients dynamically via any address in the 10.23.1.0/24 range. I was thinking that I would be able to create static only assignments for the servers via their MAC addresses, and only have 1 dynamically assignable entry for the clients, and then get the firewall to allow ports 67 and 68 to flow freely between eth0 and eth1, but I wasn't entirely sure of the best way to do all this.
I am trying to run two web servers (Virtual Hosts) on a single Linux Centos 5.5 box with a single IP address 192.168.0.182. I did all the pre-installation requirements such yum install mysql, yum install mysqladmin, service httpd start, service mysqld start etc etc.In /var/www/html directory, I have two folder called server1 and server2. These two folders have the necessary web server php script files and folders. I opened the browser and managed to install the script on one web server successfully. When I put the IP address 192.168.0.182 on the browser address bar, the page loads without any problem. Now I would like to be able to install the other web server script and I don't know how to?Here is my httpd configuration;
<VirtualHost *>
DocumentRoot /var/www/html/server1
ServerName development.mysite.com
[code]....
I've been surfing and googling for a while trying to figure out how to set up my PC running Fedora 13 to connect to Windows AD using Single Sign On services. I couldn't find any guide or tutorial or anything. I believe I'm not the only case when the company is running Windows AD for authentication.
View 2 Replies View RelatedI have question about the UNIX sockets. my goal is to connect multiple sockets from a single client to a single server and keep them open...I'm not sure if that is possible to create or not. Do you have any suggestion or an example of code?
View 1 Replies View Relatedconfiguring single signon using ldap
View 1 Replies View RelatedIn my production setup, i have 3 servers using the same mount point. However, i see that the IOPS is low. Does this kind of architecture have any impact on IOPS. In case it is neutral, how can i tune my setup for better IOPS.
View 1 Replies View RelatedI have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
View 3 Replies View RelatedDoes anyone know of a good tutorial for setting up single sign-on/login sync over a pure Linux network without any AD boxes in it? I have read this can be achieved through LDAP+Kerberos+PAM...I have these installed on a server...the users and groups on the server is configured to use them and a client has been pointed toward the LDAP server and has Kerberos enabled and users and Groups set to use the LDAP server as a backend.
I expected to see the users and groups list from the server show up on my client, or at least be able to login on the client as one such user. Am I misunderstanding what I read or am I just probably misconfiguring everything? My ultimate goal is for my clients to authenticate against my server and not have to sign in again when using server resources (Samba shares etc.).
I have read that NFS and NIS are old technologies that are going by the wayside and that Samba, LDAP authentication and such are overall better and more secure...What are everyone's thoughts on this? My network is just a home network so security isnt really a big problem...im just trying to set it up like a corporation with my limited resources would for the practice and education of doing it.
I am running single drive Ubuntu server 9.10 with a lot of software. Now I want to add one more disk (same size and type) and to convert this to RAID 0 without need of reinsallation. Is it possible and if yes how? I didn't find nothing for RAID 0. It sounds simple, but probably is not.
View 4 Replies View RelatedI've got a new server machine: Fujitsu-Siemens PRIMERGY TX150 S6.
I've tired to install CentOS 4.4 linux from DVD. This DVD is OK, because I installed from it a couple of days ago. Installation process starts but after some steps it gives me something like this code...
I try to install SSMTP mail server on Centos 5.4 and I have a following error >>
[Code]....
I work for a university institute and administrate its servers "incidently". Currently I am putting some work into our mail server configuration (sendmail 8.13.1 with amavisd-new-2.6.4). Recently I got amavis to verify DKIM signed mails. Now my plan was to sign outgoing Emails ourselves. This is what I have done (I replaced some names for privacy reasons):
I created a private key:
Code:
/usr/local/amavisd/amavisd genrsa /var/dkim/SEL1_DKIMkey.pem
Changed permissions for the user running amavis:
Code:
chown -R vscan.vscan /var/dkim/ && chmod -R 700 /var/dkim
Editet my /etc/amavisd.conf:
[Code]....
Send Testmails to sa-test@sendmail.net and check-auth@verifier.port25.com . They automatically create answer mails considering signature information.
Send emails to my external account at some other provider.
The problem is that amavis is not signing the mails. Both automatic test emails reported, that the mail had not been signed. The mail to my external account also did not contain any DKIM information.
"My" system:
Code:
# uname -r & cat /etc/issue
2.6.9-89.0.11.ELsmp
Red Hat Enterprise Linux AS release 4 (Nahant Update 8)
I configured dk-milter on a server and created dns records for that, But I'm not getting sendmail to sign emails. dk-milter configuration is correct but the problem with sendmail.
[Code]...
I'm trying to setup local LAMP installation of CentOS 5.6 in VMware for local developing. I installed Apache, PHP, phpMyAdmin from this tutorial. Is there any other begginers step-by-step tutorial for setting up LAMP? I need help setting up FTP and permissions, hot to setup permissions for /var/www/html directory?
View 1 Replies View Relatedhave xml files which has a lot of lines which contains ' which should be thesign.Should I use the sed command to change this in a complete file or grep
View 5 Replies View RelatedI have install centos distributed for server ..
linuxmans@yahoo.com
i have been trying to complete the following project1) Configure a FTP server where we can upload and download files.........2) server must run at 9 pm & stop at 9 am automatically ............although the first task was easy ,i have no idea how to accomplish the 2nd task(not to mention I'm a new user)
View 5 Replies View RelatedI'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedThere is a differentiation between a 'Server' install and a 'Server-GUI' install.
Using CentOS 5.4 DVD 1 graphic install...
[url]
So far I have not found a way to view the packages that are installed with the 'SERVER-GUI' option.
I would like to upgrade my 'Server' to a 'Server-GUI'.
I have tried to install debian 5.0 and 4.0 without any luck. I have both tried virt-manager and virt-install with both debian-501-i386-netinst.iso, and full dvd. I't always gives me the same error:Starting install.Could not find an installable distribution at '/xen/debian-501-i386-netinst.iso'
[Code]...
I've been trying for the past week to install an icecast server on my centos 5 VPS hosted through phurix.
I've tried compiling it, installing it from RPM. but im getting nowhere. Has anybody had any luck installing it, who wouldn't mind explaining how they went about it?
I've searched google for hours on end and all I can come up with is generic cent os 4 guides that just wont work. Im not the best when in comes to linux. I do a great job of copying and pasting to a shell prompt and can use ftp etc.
if this is any use.. heres the last output from my last attempt and compiling it...
[root@vps613 icecast-2.3.2]# ./configure --prefix=/usr/local/icecast
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... no
[Code]...
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies View RelatedI have a problem with compiling of mod_ruby-1.3.0 After a succesfull configure i get a error in the make, it say "make: *** [apachelib.o] error 1" . Here below you can find the results of de configuring and the make.I was following the roles in Howtoforge " The perfect server - Centos 5.3" everything goes perfect till mod_ruby-1.3.0
./configure.rb --with-apr-includes=/usr/include/apr-1
checking for a BSD compatible install... /usr/bin/install -c
checking whether we are using gcc... yes
[code]....
is it possible to join Windows Server 2003 to CentOS 5 Cluster?
View 1 Replies View Relatedwhen I reboot the server with centos 5.5 the SMB deamon doesn't start?
View 2 Replies View RelatedWhat i want to be able to do is create a custom kickstart for my centOS 5 server. I want to create a bootable cd that I can pop in my server and basically walk away for 45 minutes and I come back and its fully installed. All the directions I have read so far tell me that I have to create a seperate ks.cfg and then I need my original centos cd to get it booted. Then the cd will ask for where the ks.cfg file is and I have to type the location. I just want to pop the CD in and type in linux_clean or something and have it perform a custom install based on the information and specification in my ks.cfg. How can I go about doing this?
View 1 Replies View Relatedsomebody please tell me whether it would be all right to install xp inside CentOS using VMware or it's better to do vice versa if it is ok to install xp inside centos then at the beginning when i install centos should i allocate all hard disk to this OS and later give some to xp , or initially i should keep some space for xp and install centos in the rest ?
View 1 Replies View Related