CentOS 5 Server :: How To Install Openssh 5 On CentOS 5.5 From RPM
Jul 7, 2010
I would like to replace default OpenSSH version 4.3 with latest one (5.x). New version do support SFTP chroot, which is something I need.Of course, it can be compiled from source, but it is worst possible option for maintenance, since I do have few servers. Does someone provide RPMs or source RPMs at least ? If yes, what is repository/URL ?
I am trying to build rpm for openssh 5.8p1 on centos 5.6 (32 bit) as i have not found rpm for i386 online. i followed the below mentioned steps but when i apply command rpmbuild -bb openssh.spec it gives this error at the end:
configure error: Pam Headers not found error: Bad exit status from /var/tmp/rpm-tmp.18348 (%build)
if there is any rpm availble online or to sort out this build problem,Following steps i followed to build rpm. wget http://mirror.mcs.anl.gov/openssh/portable/openssh-5.8p1.tar.gz
tar -xvzf openssh-5.8p1.tar.gz[code]......
Now if you go back into /usr/src/redhat/RPMS/<arch> , you should see three RPMs. Go ahead and install them:rpm -Uvh *.rpm
I have configured openssh 5.8p2 with centos 5.6. My sftp is working fine with chroot environment but i am having problem with SCP. I am dealing with muliti Redhat servers. When i try to transfer data from other linux server through scp it gives connection refused. For e.g ssh 5.8 is configured on new server and i want to transfer files from old server which is using openssh 4.3 version.i created same username and password on new server as on old server.My sftp users on new server has no shell access but only sftp access. When i try to scp from old server to new server it gives error connection refused. Is the below configuration only for sftp and can't scp? According to google the configurations i found are for scp and sftp. Do i need to generate ssh keys by giving users on new server shell access, once created then stop shell access again, as i dont want to give shell access permanent for security reasons? but i want to use ssh keys for more security as well.
Port 22 PermitRootLogin no 1.override default of no subsystems[code].....
I have tried to install debian 5.0 and 4.0 without any luck. I have both tried virt-manager and virt-install with both debian-501-i386-netinst.iso, and full dvd. I't always gives me the same error:Starting install.Could not find an installable distribution at '/xen/debian-501-i386-netinst.iso'
I've been trying for the past week to install an icecast server on my centos 5 VPS hosted through phurix.
I've tried compiling it, installing it from RPM. but im getting nowhere. Has anybody had any luck installing it, who wouldn't mind explaining how they went about it?
I've searched google for hours on end and all I can come up with is generic cent os 4 guides that just wont work. Im not the best when in comes to linux. I do a great job of copying and pasting to a shell prompt and can use ftp etc.
if this is any use.. heres the last output from my last attempt and compiling it...
[root@vps613 icecast-2.3.2]# ./configure --prefix=/usr/local/icecast checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... no
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
I need to find a way to upgrade OpenSSH support to something more than the patched 4.3p2 which comes included in CentOS 5.3. Specifically I want to be able to use the Chroot functionality which was added in OpenSSH 4.8.
# The following directives force ben_files to become chrooted # and only have sftp available. No other chroot setup is required. Match user ben_files
What i want to be able to do is create a custom kickstart for my centOS 5 server. I want to create a bootable cd that I can pop in my server and basically walk away for 45 minutes and I come back and its fully installed. All the directions I have read so far tell me that I have to create a seperate ks.cfg and then I need my original centos cd to get it booted. Then the cd will ask for where the ks.cfg file is and I have to type the location. I just want to pop the CD in and type in linux_clean or something and have it perform a custom install based on the information and specification in my ks.cfg. How can I go about doing this?
somebody please tell me whether it would be all right to install xp inside CentOS using VMware or it's better to do vice versa if it is ok to install xp inside centos then at the beginning when i install centos should i allocate all hard disk to this OS and later give some to xp , or initially i should keep some space for xp and install centos in the rest ?
I'm trying to get openssh-server working so I can stop using the family TV and just SSH from my laptop. I've only just installed 10.4 server edition, and I've made a change to /etc/apt/sources.lst by removing the # in front ofdeb cdrom:[Ubuntu-Server 10.04 LTS Anyway I run:sudo apt-get install openssh-server
Code: Reading package lists... Done Building dependancy tree
I have a problem with compiling of mod_ruby-1.3.0 After a succesfull configure i get a error in the make, it say "make: *** [apachelib.o] error 1" . Here below you can find the results of de configuring and the make.I was following the roles in Howtoforge " The perfect server - Centos 5.3" everything goes perfect till mod_ruby-1.3.0
./configure.rb --with-apr-includes=/usr/include/apr-1 checking for a BSD compatible install... /usr/bin/install -c checking whether we are using gcc... yes
I built a home server (NAS/WWW/SSH/media server etc) and chose CentOS 5 as the OS (stability, easy of configuration).I was just about to start tuning the power consumption when I realised that the kernel CentOS uses is so "old" that it does not support the latest reduced power consumption enhancements that Linux has achieved in big strides in the recent past (we are probably still talking 6-12+ months ago e.g. tickless kernel)..
So my questions; 1) I know CentOS was maybe not meant for home servers (certainly its not its primary purpose), but if it is, any ideas of what kind of power consumption it takes (I know its relative) and if there are particular power consumptions that are worthwhile?
2) Do you recommend me compiling my own 2.6.21+ kernel from kernel.org or am I just likely to have compatibility issues (I really did not want to do that) or when is CentOS 5.4 supposed to have a newer 2.6.21+ version kernel?
Was it wrong of me in principle to choose CentOS for a home server when I am power conscious? (I don't have a low-power VIA processor either but a P4 so I am really just hoping to make do with software changes).
I have a few mail servers, a mail log server and a web server running on Centos 5. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves.
I have already installed VMWare Server 2.0 I have a few questions: How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program? How do I actually do this cloning? Is there a tutorial on how to do this?
If I ssh from my laptop (running F10) to the server (centos 5.2) it asks for the password, but everytime I enter the correct password it says incorrect password. when I do the same from the server to my laptop I can get in just fine. I think my passwords are stored as ssha in the LDAP (I tried clear passwords and that dosen't work either).
I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world
I have a centos 5.5 server, without a monitor connected to it.Sometime i need to connect to it with VNC, but maximum resolution is 800x600.How can i increase it at least 1024x748 ??I tried in system-config-display changing the monitor to a generic CRT 1024x768, and rebooted.But only allowed resolutions are 800x600 and 640x480.
I have some trouble with my hp workstation xw4400 with an ATI FireGL 3300 and the X-Server. There was no problem with the graphical install routine and the graphical boot works fine. But when the system changes into the login-screen, then it results in a black screen and a more or less frozen system.
I am running an application that requires use of my /etc/hosts file. In it, I have my machine name and its LAN ip address. The program creates a service on a specific port, then attempts to connect to it based on the host name. So my hosts file has to be correct.I added the nameservers to resolv.conf and now my application will not run. My guess is that the computer is checking the name servers first, timing out then checking the hosts file.Is there a way I can tell the system to check the hosts file first, then DNS. I thought it should behave that way by default, but it does not appear to.
i am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
I've installed the CentOS 5.1 from a CD only yesterday and everything is working fine except Mysql that came from the CD distribution. I have detected that my system has mysql.
[root@onion /]# rpm -qa |grep mysql mysql-5.0.22-2.1.0.1 [root@onion /]# find . -name mysql ./usr/bin/mysql ./usr/share/mysql ./usr/lib/mysql
However I'm unable to find mysqld, safe_mysqld or mysql_install_db in my filesysytem.