CentOS 5 Networking :: Virtual Host Entries Are Not Working When Accessed From External Static IP?
Jan 16, 2011
I had made following entries in my httpd.conf file at centos5.5.
###########################
Listen 80
Listen 8080
Listen 8085[code]....
When i am trying to access the any directory other on port *80, its not being accessible from the static ip which is routed through a DMZ server. http://122.165.35.9:8085 something like this returns the error "could not connect to web browser"
View 3 Replies
ADVERTISEMENT
Nov 22, 2010
I want to create a virtual host and virtual ip in proftpd linux centos. can anyone please help me on this,I'm new in linux.
View 8 Replies
View Related
Jan 12, 2010
I just installed Centos 5.4 on the 2nd partion of my hard drive. I have an ethernet card in my machine (a 3Com Corporation 3c905 100BaseTX [Boomerang] card), but I need to be able to use my wireless USB device I bought from my local phone company (Qwest)...because I will not always have the luxury of plugging in to a hard-wired connection. The USB wireless device works fine in Windows, but I need to be able to use it on my newly installed Centos 5.4 partition.
Here's some info:
[Code]...
View 4 Replies
View Related
Jun 16, 2010
I have a 10.04 on virtual machine (VMWare) Network card is bridged. I wanted to change the connection from DHCP to static IP. Tried both ways already:
[Code]....
The connection is established and ifconfig shows the correct IP, but nobody can ping me and i cannot ping anybody!! I have no connection to the internet.
Code:
vm_ll@me:~$ ifconfig -a
eth1 Link encap:Ethernet HWaddr 00:0c:29:e6:87:69
indirizzo inet:10.1.1.45 Bcast:10.1.1.255 Maschera:255.255.255.0
indirizzo inet6: fe80::20c:29ff:fee6:8769/64 Scope:Link
[Code].....
View 1 Replies
View Related
Feb 25, 2011
i installed RHEL 6 as virtual host on one of the blades on HP enclosure. i set up network on eth0 and started it but i cannot even ping gateway from within this installation. i logged in as root. i set up everything such as IP, netmask, gateway, nameserver etc.
View 1 Replies
View Related
Jun 16, 2011
I have setup apache webserver on RHEL5 working fine for months now. Next task is to add another domain name to the webserver using the same IP address. I have been trying to set up apache name based virtual host for the past several days without success. Each time I try elinks [URL] it went to the main page sales.example1.com. Main page sales.example1.com is on DNS but 2nd domain [URL] is not created on DNS yet. I just doing testing first on /etc/hosts.
10.145.13.10 sales.example1.com sales
10.145.13.10 www.exampletst.com
I have tried googling, search forum, and read documentation. I have checked my httpd.conf file several times but there must be some simple step or config error that I might miss:
Apache version is 2.2.3. Output of my httpd.conf file:-
NameVirtualHost *:80
# Default Virtual Host
<VirtualHost *:80>
ServerName sales.example1.com
DocumentRoot /var/www/html
DirectoryIndex index.html index.shtml index.php
</VirtualHost>
<VirtualHost *:80>
ServerName www.exampletst.com
DocumentRoot /var/www/virtual/tours
ErrorLog /var/log/httpd/tours_error_log
CustomLog /var/log/httpd/tours_access_log common
DirectoryIndex index.html index.shtml
<Directory "/var/www/virtual/tours/">
Options Indexes FollowSymLinks Includes
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
View 11 Replies
View Related
Nov 10, 2010
i have linux server application based on centos 5 that run httpd daemon from /usr/local/pf/conf/httpd.conf which is generated from the /usr/local/pf/conf/templates/httpd.conf.apache22 file
the problem is every time i run my linux server application i am not able to access phpmyadmin unless i stop my linux server application which is stop it httpd daemon then start "service httpd start"
i have been told by forum moderator to create an alias for my phpmyadmin in Virtual Host but it stil dont work, i am not able access my phpmyadmin site
this is what i have done to solve this problem
- open /usr/local/pf/conf/templates/httpd.conf.apache22 file then look for <VirtualHost *:%%admin_port%%>
- add Alias /phpmyadmin "/usr/share/phpmyadmin" (Failed)
- add Alias /phpmyadmin /usr/share/phpmyadmin (Failed)
- add Alias /phpmyadmin "/usr/share/phpmyadmin/" (Failed)
[Code]....
NB : my phpmyadmin is install on /usr/share/phpmyadmin with /etc/httpd/conf.d/phpmyadmin.conf as phpmyadmin configuration file
why i still cant open my phpmyadmin site ? or why i cant run phpmyadmin together with my linux server application because it use the same daemon (httpd daemon)
View 1 Replies
View Related
Jun 6, 2011
Debian Testing host, Winduhs XP guest. Winduhs is not allowed to directly access The Internets, and I am not setting up bridging as that makes it possible for the guest to mount layer 2 attacks on the LAN. I need for the guest to tunnel through the host without being able to see anything on the host, so it can then get access to The Internets, while being protected by iptables (Shorewall).
Used to be with VMware I had host-only set and the guest in a different class c (192.168.2.1) from the host (192.168.1.1) I turned on ipforwarding, set Shorewall rules, and it all worked. Now I have everything set with VirtualBox, and it does not work. Guest can ping its interface but not host. Host can ping vboxnet0. Host is supposed to masquerade guest's 192.168.2.1 through to the default out at 192.168.1.1, but it's not. I think a clue is in routing, but I don't know what's wrong.
[code]....
View 2 Replies
View Related
Sep 8, 2010
Has anyone had issues installing Drupal on centos. I have copied my files into a virtual host container but cannot access the site. When I place a phpinfo file into the folder and browes to it I see that Virtual Directory Support is "Disabled" However how did the php page get shown from the same virtual directory mm I may have asked to soon.Installing Drupal on CentOS 5/Red Hat/Fedora http://drupal.org/node/32773
View 1 Replies
View Related
Mar 17, 2010
Get the list of virtual addresses being accessed by any application during its execution time. I don't want the complete memory map but just the pages which were accessed during an application's execution?
View 2 Replies
View Related
Mar 17, 2010
How to get the list of virtual addresses being accessed by any application during its execution time. I don't want the complete memory map but just the pages which were accessed during an application's execution?
View 2 Replies
View Related
Mar 17, 2010
How to get the list of virtual addresses being accessed by any application during its execution time. I don't want the complete memory map but just the pages which were accessed during an application's execution?
View 1 Replies
View Related
Jul 7, 2011
I am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora. I would like to mount a folder of the host machine on my VM, but never succeeded. The result of the command is :
root@armnlib-kvm:~# mount -v 192.168.1.10:/nfs /nfs
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Thu Jul 7 06:02:43 2011
mount.nfs: text-based options: 'addr=192.168.1.10'
[Code]....
View 2 Replies
View Related
Jan 28, 2010
I'm trying to ssh into a virtual installation of ubuntu I have, named "ubuntu-x86" but I can't get it to work for some reason. I have two network cards, both assigned to NAT, on the virtual machine, but one has a static IP address, while the other uses DHCP. For some reason, the command:
[Code]....
View 7 Replies
View Related
Jun 19, 2011
I have an Ubuntu 10.10 host running in VirtualBox 4.0.8 r71778, and I need to setup a LDAP authentication network between two VM's: a Maverick-based distro and Ubuntu Server 11.04.
Screenshot of the two running perfectly fine:
[URL]
Using NAT, I can have the two VM's up and running on VBox, but they get the same IP (10.0.2.15).So I googled it and quickly found out that I needed to change the VM's network interfaces to Bridged Networking. So I tried that. Here's two screenshots of the default configurations:
1- Ubuntu Maverick based distro:
[URL]
2- And here is one of the Ubuntu Server:
[URL]
(I'm Portuguese, that's why there are mixed languages in the UI)It's pretty stupid to explain like this, but whenever I try to start one of those two using Bridged Networking, I get a black screen full of errors (I can't take a printscreen of that, so I took a bunch of pictures - yeah, it's lame, I know ). Then, I have to press the power button to shut down my host, and restart the pc.Here they are:
[URL]
Where I think the problem is:
[URL]
My host is currently running Linux kernel 2.6.38-10.I have dkms, linux-header-generic and build-essentials installed (and the VB extension package too)And my host is a laptop, connecting to the internet using the router my ISP provided me.How can I solve this? Is this some kind of bug regarding 2.6.38-10 kernel?I don't have other pc's to test my LDAP authentication, so I needed the two VM's to have different IP's.
View 4 Replies
View Related
Oct 30, 2009
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies
View Related
May 23, 2011
I am a developer, not a network admin - sorry if this ia dumb question. I need to test an application on CentOS 55 64 bit. The instalation went fine and initially I let DHCP work its magic. The router IP address ia 192.168.0.1 and all other VM's I have are granted dynamic ip address on this range (i.e. 192.168.0.x). However, the CentOS vm got an IP address that looks like it belongs on a different subnet :192.168.1.1
The VM (vmware desktop) network setting for this VM uses "Bridged: Connected directly to the physical network". I can ping the host (Windows 7 64 bit) and the host can ping it (it been the VM) - but no other computer on the network can see it. To make things easier, I changed the network configuration to use a static IP address. Here are my configuration files:
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
HWADDR=00:0C:29:83:4B:A4
ONBOOT=yes
TYPE=Ethernet
[Code]...
View 3 Replies
View Related
Jul 3, 2009
apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 Replies
View Related
Apr 21, 2010
I'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
View 2 Replies
View Related
Jul 24, 2010
what I am trying to do is use an external transparent proxy for only one of the hosts on my internal network. For example, for an internal host of 192.168.1.8, I want to send all internet requests for ANY port to a proxy server out in the internet at 238.34.232.7 / port: 8080. All other hosts would use the internet without using any proxy server. Is IPTables the way to set this up or is there an easier option?
View 3 Replies
View Related
Feb 6, 2011
I just set up my first ever bind9 DNS server running on ubuntu server 10.04. This server is also my gateway/dhcp server.
Here is what is weird: If I do a dig @8.8.8.8 dschuett-lmtl.scs.local from any of my clients it resolves?!?! Dig shows that it got the answer from MY Bind9 DNS server (and NOT Google's of course), but why is it still resolving when I'm telling it to use and external DNS server?
The other weird thing is that the SAME EXACT dig command above does NOT resolve internal host names if I do it from the Bind9 DNS server. - Which is what i would expect SHOULD be happening if done from the client machines...
Here are the dig results:
From any internal client:
Code:
View 2 Replies
View Related
Jun 15, 2010
I had configured Squid in RHEL 5 and facing an issue with pinging. Not able to ping any website,hostname is resolving to ip address but not able to ping
[code]...
View 8 Replies
View Related
Jan 8, 2010
Is there anyway for one Virtual Server to access the main host, or another Virtual Server? Or would they be totally 100% independent?
View 5 Replies
View Related
Oct 31, 2009
I have a WindowsXP virtual machine which I need to isolate from the host machine completely (have the host act as a bridge but not be visible on the IP layer at all.) It still needs to have Internet access. Obviously it has to be able to contact the router but I would like to be able to block port 80 (or even just block all SYN packets addressed to the router.) I also want to allow port forwarding from the router to the virtual machine. I can use basic iptables but this is way beyond me.
The host OS is probably going to be Debian Lenny but this is not built yet so if someone can recommend a different distro which is as lightweight as possible but will support VMWare, iptables and tcpdump then that would be great. I was thinking of Slackware but I have not used it in ages and from what I can remember their is no real package management.
View 1 Replies
View Related
Aug 17, 2010
I can ping a host on my LAN successfully, but I cannot ping [URL]... for example. I have disabled the firewall and set http_proxy and can browse the internet with "Use system proxy settings" checked in Firefox. I am unable to update with yum either, but I am not sure if this is a side effect or not. I have run a trace on my ip address as I am browsing the internet and I can see the sites I am visiting on our web appliance. However, if I try to ping or update no requests are hitting the proxy so I don't think that is the issue.
View 6 Replies
View Related
Jul 24, 2010
I have searched for this quite a bit but my lack of knowledge of IPTables makes me doubt whether I have found a solution or not. I have very light experience with IPTables as well.So I thought I'd ask here.Basically, what I am trying to do is use an external transparent proxy for only one of the hosts on my internal network. For example, for an internal host of 192.168.1.8, I want to send all internet requests for ANY port to a proxy server out in the internet at 238.34.232.7 / port: 8080. All other hosts would use the internet without using any proxy server.
View 1 Replies
View Related
May 27, 2010
This is a RHEL 5.4 install. I did a fairly routine install setting up a static IP address of 10.5.96.10, a subnet mask of 255.255.254.0, and a gateway of 10.5.96.1 with the standard DNS setup for this network. These are all standard network setting for this network and otherwise work fine on other systems. The IP, gateway, and subnetmask all appear correctly on all relevant configuration files. This server can not ping any other system on the network and can not ping its default gateway. No other systems can ping this one either. Also this system can not ping "localhost" or its own hostname. The hosts file contains the line:
[code]...
I can ping 127.0.0.1 and 10.5.96.10 and it works fine. Also the firewall is disabled. I know I probably can't get a straight forward fix with the information I have on hand right now, I'm more of a Debian guy, so there might be some Red Hat intricacies I'm not familiar with. I think I had a CentOS install some months back that had this issue and I don't remember how I fixed it, or if I even did. I might have just replaced it with Debian. That's unfortunately not an option this time around since it's not my box.
View 4 Replies
View Related
Jun 1, 2009
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
View 3 Replies
View Related
Jul 14, 2009
Have done a bit of Googling around this but got totally swamped so will try here. Basically we are running a CentOS server which hosts a number of virtual hosts under Apache. Recently I needed to set up a development environment for another site using Ubuntu and have this running and accessible on the LAN from a VMWare image. I'm using bridged networking so the VMWare machine has its own IP on the LAN subnet.
I've set up a DNS to point to the external IP of the physical host but can't figure out how to route traffic requested on this domain to the VMWare host. I've basically tried two approaches (configuring a proxy web server and reverse proxy in an httpd.conf file and mucking around with iptables forwarding rules but without success.
Ideally I'd like somesite.somewhere.com to point to the VMWare IP but I could live with a custom port on the end if thats whats required.
To throw further complication into the mix I need reliable communication between the VMWare machine and external mail relay servers in order to debug any issues with mail bouncebacks, embargos etc.
Any idea what's the easiest way to accomplish this?
View 4 Replies
View Related
Oct 30, 2010
I am using 2 VPS machines on VMware workstation.The older one is Debian 5.0 ( Lenny ) and I have successfully installed Static IP to networking and it works fineithout any problems.I just installed another Debian 5.0.6 ( Latest ) Lenny and installed another static IP. It's partially working and partially not. When I ping the server, the ping is successful but if I try to SSH, it says Connection refused and even if I tro use the net through the machine, it doesn't work and host name lookups fail. What could be the issue
View 3 Replies
View Related
