Ubuntu Networking :: Static IP On Virtual Machine?
Jun 16, 2010
I have a 10.04 on virtual machine (VMWare) Network card is bridged. I wanted to change the connection from DHCP to static IP. Tried both ways already:
[Code]....
The connection is established and ifconfig shows the correct IP, but nobody can ping me and i cannot ping anybody!! I have no connection to the internet.
Code:
vm_ll@me:~$ ifconfig -a
eth1 Link encap:Ethernet HWaddr 00:0c:29:e6:87:69
indirizzo inet:10.1.1.45 Bcast:10.1.1.255 Maschera:255.255.255.0
indirizzo inet6: fe80::20c:29ff:fee6:8769/64 Scope:Link
[Code].....
View 1 Replies
ADVERTISEMENT
Dec 3, 2008
I have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
View 2 Replies
View Related
Jan 11, 2011
#1: Where can I assign a static IP address on my lubuntu box?
#2: Also, is it possible to see the lubuntu box from a Windows machine? If so, how does that work?
View 3 Replies
View Related
Jan 16, 2011
I had made following entries in my httpd.conf file at centos5.5.
###########################
Listen 80
Listen 8080
Listen 8085[code]....
When i am trying to access the any directory other on port *80, its not being accessible from the static ip which is routed through a DMZ server. http://122.165.35.9:8085 something like this returns the error "could not connect to web browser"
View 3 Replies
View Related
May 27, 2010
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies
View Related
Mar 6, 2011
I am a linux beginner and dont know that much about networks! I have access to a linux VM. The machine is remote and i access via putty. If i can access this machine via SSH and putty, is there any reason why i should not be able to use ssh tunnelling to connect to a vnc server?
I don't know the details of the server and what firewall is set up but i believe that tunnelling uses port forwarding over the ssh connection that is already set up. Where does the port forwarding actually occur? At the actual linux VM or on the router the VM is connected to?
View 1 Replies
View Related
Feb 21, 2010
I installed a minimal ubuntu (minimal.iso) on a virtual machine (vmware) on my windows pc using following packages:
Code:
sudo apt-get install install gnome-core gdm network-manager-gnome human-theme x11-xserver-utils tangerine-icon-theme gnome-themes-ubuntu ubuntu-artwork jockey-gtk gnome-utils firefox
I'm using the Ubuntu VM as my local http server. It is reachable via ip - so http://IP-ADDRESS works. I also use samba for shared folders... but ubuntu is not listed in my network. What means that i cannot access files from outside the vm. Do I have to install further packages, because "normal" ubuntu distributions are listed in my network connections. Samba packages are correctly installed.
View 2 Replies
View Related
Jun 8, 2010
I am using Ubuntu 10.04, 64-bit. I am trying to set up a virtual machine on it using vmbuilder. As I understand, I need to set up bridging. If I set up br0, then I cannot get out of the machine. Even a ping to 192.168.1.1 (my gateway) comes back as network unreachable. If I comment out #auto br0, then I can get out (on eth0), but i get an error from libvirt. My /etc/network/interfaces file (eth0 networking works, but libvirt does not):
#auto eth0
#iface eth0 inet dhcp
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.154
netmask 255.255.255.0
[Code]...
View 1 Replies
View Related
Jul 7, 2011
I am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora. I would like to mount a folder of the host machine on my VM, but never succeeded. The result of the command is :
root@armnlib-kvm:~# mount -v 192.168.1.10:/nfs /nfs
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Thu Jul 7 06:02:43 2011
mount.nfs: text-based options: 'addr=192.168.1.10'
[Code]....
View 2 Replies
View Related
Mar 17, 2011
I've forwarded incoming connections on port 25 to my virtual machine with the following commands:
sudo iptables -t nat -A PREROUTING -p tcp -i eth0 -d 10.1.1.3 --dport 25 -j DNAT --to 192.168.56.101:25
sudo iptables -A FORWARD -p tcp -i eth0 -d 192.168.56.101 --dport 25 -j ACCEPT
The strange thing is the connections coming through in the virtual machine seem to be getting dropped. A port scan from the internet says the port is closed, but it is not the case as I can see the connection coming through. As you've probably worked out, I am running a mail server. When I send myself test mail, the connections from the senders mail server also gets dropped.
View 1 Replies
View Related
Aug 28, 2010
I've a weird problem about my honeypot project. All start from installation until running process is going smoothly but when I try to ping my honeyd vm from honeyd host it couldnt but it can be ping from other machine inside my local network. I am also usinng arpd for ARP request reply and standard honeyd config.
View 1 Replies
View Related
Oct 22, 2010
I have removed Network Manager Gnome from my Ubuntu which is a virtual machine(Guest OS),I see the internet is no more running inside this Virtual Machine.While in other Virtual Machines (Other Linux) I had not removed Network Manager Gnomeand I see internet is running fine in them.
View 3 Replies
View Related
Apr 19, 2011
I'm running Red Hat as a virtual machine on VMWare and the network configuration on VMWare is a bridge and i have had this problem, some times does not get network o others do, i have verified code...
View 2 Replies
View Related
Jan 28, 2010
I'm trying to ssh into a virtual installation of ubuntu I have, named "ubuntu-x86" but I can't get it to work for some reason. I have two network cards, both assigned to NAT, on the virtual machine, but one has a static IP address, while the other uses DHCP. For some reason, the command:
[Code]....
View 7 Replies
View Related
Mar 16, 2011
I had been running my SMTP server with WINE, as the SMTP server software is a Windows-based program (MERCURY), but I cracked the shits with WINE and removed it. Now I am running my SMTP server in a Windows virtual machine.This virtual machine has a different IP address from my host machine, so what I need is for my computer (the host) to redirect incoming traffic on port 25 to the virtual machine at 192.168.56.101 on port 2525.Can someone please help me with it? I think its done with iptables.
View 1 Replies
View Related
Feb 3, 2010
how to use CTRL-ALT-DELETE on a virtual Windows machine on my Virtual Box?
View 2 Replies
View Related
Jan 2, 2011
How do I program a virtual machine to auto-start/boot upon boot up of the host system? I am experimenting with SNORT network intrusion detection system and have installed it inside a virtual ubuntu box which I want to start automatically.
View 1 Replies
View Related
Jul 27, 2011
I am a newbie trying to enable virtual hosting and run it on a local machine without fqdn. I checked the http://9.9.9.92/ (my IP address) site and saw my (default) page. I would like to virtuly host a asdf.com If virtualy hosting is setup properly - how do I access the new setup? Just type http://asdf.com ? or is there more to it?
View 6 Replies
View Related
Jul 6, 2010
I have a problem with my wired connection. The problem started when I tried and failed to install vmware virtual machine.... now I have no internet connection at all that I can see. This is output of:
ifconfig
eth0 Link encap:Ethernet HWaddr 90:e6:ba:97:64:f0
inet6 addr: fe80::92e6:baff:fe97:64f0/64 Scope:Link
[code]....
View 3 Replies
View Related
Jan 3, 2010
I read once that you could use VMWare's converter to convert a physical machine into a virtual machine to run in VirtualBox. Can someone point me in the direction of a tutorial or just give me instructions on how to do this? I was very confused by the converter and how to get the image to work with virtualbox.
View 1 Replies
View Related
Aug 14, 2010
Can I copy my virtual box VM windows XP virtual-machine files to another Linux computer and run the machine on that computer while I keep on running it on the original computer?
This question is about technical possibilities, not licences.
View 2 Replies
View Related
Oct 31, 2009
I have a WindowsXP virtual machine which I need to isolate from the host machine completely (have the host act as a bridge but not be visible on the IP layer at all.) It still needs to have Internet access. Obviously it has to be able to contact the router but I would like to be able to block port 80 (or even just block all SYN packets addressed to the router.) I also want to allow port forwarding from the router to the virtual machine. I can use basic iptables but this is way beyond me.
The host OS is probably going to be Debian Lenny but this is not built yet so if someone can recommend a different distro which is as lightweight as possible but will support VMWare, iptables and tcpdump then that would be great. I was thinking of Slackware but I have not used it in ages and from what I can remember their is no real package management.
View 1 Replies
View Related
Jul 29, 2009
I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies
View Related
Jan 11, 2010
I would like to assign a static IP to Debian running on my virtual box. How should I do it? What needs to be written in /etc/network/interfaces.
View 5 Replies
View Related
Nov 14, 2009
I have Linux server with VMware Server 1.0.8. When I creating a virtual machine, I can not "send" a PING to the virtual machine. In the virtual machine, I have installed CentOS 5.3 (32bit). In the virtual machine I have defined the addresses IP. So, whey I can't "sent" a ping to the virtual machie? I have to set something on the Linux server?
View 3 Replies
View Related
Apr 26, 2010
I got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies
View Related
Jun 16, 2009
I want to add more than one Virtual IP to my CentOS machine. I was able to add one ver easily by creating a file ifcfg-eth0:1 and editing the IPADDR field. But I cannot create more by creating a ifcfg:eth0:2, for example.
View 3 Replies
View Related
Aug 3, 2010
I am struggling with what might be a minor problem. I have a home computer which I would like to setup as a webserver and hence give it a static IP address. It is connected to by wire to a router that is connected to the WAN via PPPOE. If I enable the network card on DHCP it works fine in browsing the web. If I now set it to static IP address it does not brown. Essentially I use the command setup to run the static IP setup. I then set my IP address to 192.168.254.X , the subnet mask 255.255.255.0 and the default gateway to 192.168.254.1 (this is the router connected to the WAN). I am able to ping the router, however when I try and browse on static it does not work. Your help will be most appreciated as this has taken way too long to solve and I have Googled as much without success.
View 5 Replies
View Related
Jun 15, 2010
My current plan is to choose a lightweight host OS such as Ubuntu or XP, and then install a virtual machine with Windows 7 as the guest OS. Most importantly, I will use the guest OS almost exclusively. I would like to install all of my software onto the guest OS and then save a "snapshot", as Virtual Box puts it. This is to keep my system free of any unwanted programs I will undoubtedly encounter.
Here are some specific questions I would like answered:
What would be good choices for host operating systems?
What percent of my total RAM (4GB) should I allocate to the virtual machine?
What are the advantages and disadvantages of using different visualization software such as Virtual PC, Virtual Box, and VMware Server?
I play a lot of games on Steam. What problems may arise?
View 4 Replies
View Related
Nov 3, 2010
I have been using 3CX on Vista for 2 years now. I recently upgraded my PC to run Ubuntu 10.4. I installed Sun's VirtualBox and set up a virtual machine within which I run Windows 7. I then installed the latest version of 3CX in this virtual machine/Windows7 environment and used the back up config to setup the new 3CX system. It works great, but for one thing.... When voice mail messages are left by callers, it does not seem to exist. The message is not in the users account, and is not sent by eMail as a wav file as it used to
View 1 Replies
View Related
