CentOS 5 :: Mount Data From USB To Dev/sdb5?
Jun 8, 2009mount data from USB to dev/sbd5
I try
mount /dev/sdb5 /media/usbdisk
ADVERTISEMENT
CentOS 5 :: Mount Bsd/386 Partition To Recover Data
Jul 4, 2009I need to mount a bsd/386 partition on my hard drive to recover data. I am running the latest CentOS 5.3, downloaded and installed in the last week.My searches have turned up a mount command, that does not work.
[root@new-host-2 ~]# mount -t ufs -o fstype=444bsd /dev/sda3 /mnt/bsd
mount: unknown filesystem type 'ufs'
[root@new-host-2 ~]# mount /dev/sda3 /mnt/bsd
[code]...
So, is there a patch to get mount -t ufs working?is there a patch to get bsd/386 filesystem type? have not build a kernel before, so I would like to avoid that, but I will attempt it if I have no other options.
General :: Mount: /dev/mapper/gegevens-Data Already Mounted Or /data Busy
Jul 14, 2010A few months ago I have setup a server with three hard disks. The partition mapping the disks as follows:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x7ca36fee
[code]....
Now I have the following problem the LVM file system don't mount properly.If I open the mount point I see only a few files of the LVM disk. If I want to unmount the disk I get the following error:
umount /data/
umount: /data/: not mounted
If I want to mount the volume I get the following error:
mount -a
mount: /dev/mapper/gegevens-Data already mounted or /data busy
Ubuntu Installation :: Duplicate Drives In "Places" - Error "mount: /dev/sdd1 Already Mounted Or /media/Data Busy Mount: According To Mtab, /dev/sdd1 Is Already Mounted On /media/Data"
Feb 13, 2010Just moved to Ubuntu from XP. Whole process has gone very smoothly, but left with a small problem (i.e. it isn't actually affecting usability) that I don't seem to be able to fix and can't find on forums/internet. I also have a problem with the Floppy drive, but I've seen that problem elsewhere in the forums.
It's a dual boot system with both NTFS and Ext4 drives. All are visible and fully accessible. I decided to convert one of the NTFS drive to Ext4. That appeared to be successful and was successfully remounted as an Ext4 drive. The drive label is "Data". I did have a bit of a problem getting it remounted so that I could see/use it under my log-in as opposed to just under root. It's at this point I think that I did something to create the problem.
I now have two entries for "Data" in drop down menu for Places. The true one is shown as a standard hard drive icon, but the false one is shown as a different icon - possibly an external drive icon (note that the floppy drive is also showing as the same icon and I can't access that, but I've seen that's a problem elsewhere in the forums).
I can write and read to the true "Data" hard drive. If I click on the other false "Data" icon, I get the message "mount: /dev/sdd1 already mounted or /media/Data busy mount: according to mtab, /dev/sdd1 is already mounted on /media/Data". If unmount the true drive and try to mount the false drive, the system mounts the true drive instead. If I log into nautilus as root, neither the false data drive or the floppy appear in the left hand panel.
CentOS 5 :: Mount Error: Can't Mount An Encrypted Volume With An Overlaying Ext3 FS
Jun 6, 2010I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running: mdadm --zero-superblock /dev/sda6 mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module [root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4 Enter passphrase: Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume:
mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
[Code]....
So why is it that I can't mount my encrypted volume after the first time? I am giving the correct password when it asks to.
CentOS 5 Networking :: Share Data Between WINDOW And CENTOS?
Dec 29, 2010I m new study Linux so Would you like guide me how to config CENTOS to share DATA .Anyway , pls if possible pls help me build FILE SERVER, ISA by CENTOS
View 3 Replies View RelatedFedora :: Mount And Unmount Data Partitions
Jul 29, 2011I'm in the process of building a new Fedora machine. I use the machine for a VMWare server, the file server for the house as well as a Linux desktop for work.My current machine has a single 1.5GB hard drive. The new machine will have a mirrored RAID drive(2TB). I'm also contemplating using a smaller 250GB drive for the OS installation. I would then divide up the 2TB drive into /home and /var/lib/vmware partitions where the bulk of the data would reside.The goal is to be able to unmount the /home and /var/lib/vmware partitions when I need to upgrade the OS version with the data intact and remount them once the new install is complete.
The goal is to keep the family network file shares and my Virtual machines intact while reinstalling the new Fedora OS from scratch. In theory it should work. I just want to mak an (in)sanity check to ensure it will work in practice.
Ubuntu :: HDD Failed / Anyway To Mount It To Recover Data?
Feb 28, 2010It seems my 320gb HDD has bitten the dust. The timing couldn't be more ironic as I have spent a couple of days tidying the files on it to burn them to disk.
This is an ntfs drive that had indicated 4 bad sectors but up until today (backup day) was fine. I am unable to mount it and in fact it is causing some sort of conflict with the OS drive and wont let the system boot up successfully.
I am going to try using a windows based PC tomorrow to see if I can rescue the data.
Are there any 'other' tricks to try and mount it with ubuntu that I may not have tried so far? I have tried-
mkdir /media/disk
fdisk -l to establish it's name which was /dev/sdb1 when it was all working but it isn't reachable and doesn't show in the places menu or in any of the menus when using a live CD to get round the HDD clash.
sudo mount -a used in desperation after the mkdir but nothing.
I rejigged the cabling inside the PC to make the HDD a secondary master as it was a slave on the primary IDE to start with in the hope that the system would boot up normally but to no avail.
Ubuntu :: How To Mount Partitions For Data Access
Jul 3, 2010I figured I could just go in to my Kubuntu desktop and look at the drive. But it has only a lost and found and grub folder with a few files on the root named config-[version]-server (note this is a SCSI). Guessing I'm looking at the boot partition? So how do I mount the other partitions? When I do a fdisk -l I see 3 sdb 1,2,3 (2 and 3 are large, 1 is my boot partition) but when mounting them I get wrong fs type. I was sure its ext3 ( also tried 2 and 4 )? I just left the default 7.04 fs when I installed it. I'm able to put it in my desktop and my server but for the life of me I can figure out how to get at the data.
View 4 Replies View RelatedUbuntu :: Can't Mount Hdd To Save Data / Solution For This?
Sep 9, 2010My system ubuntu 10.04 crashed. Now I boot from liveCD and I can�t mount HDD.
fdisk �l give partitions, but mount does not work. Crashed system should be on sda1 and it is ext4. code...
Ubuntu Installation :: Can't Mount Data Drives
Jan 9, 2011I installed 10.10 on my workstation but now my system refuses to mount two existing two data drives that were already there... sudo mount /dev/sdc /mnt/data-b gives me: mount: unknown filesystem type 'isw_raid_member'
I didn't change any BIOS settings... My BIOS is not configured for RAID at all, that setting reads AHCI, which should be okay for my kernel (using the stock 2.6.35-24).
I tried to force mount one of the drives with sudo mount -t ext3 /dev/sdc /mnt/data-b
but this gives me an even stranger message:
"/dev/sdc already mounted or /mnt/data-b busy (neither of them are true...)
It's mainly the "isw_raid_member" thing that troubles me... I didn't and don't have a RAID system at all..
General :: Accessing Data Under A Mount Point?
Apr 10, 2010I'm using ext3 and I have my / partition on sda3. This is a full install, it has /bin /home etc etc on it, the only thing I have is sda1 is /boot and sda2 is swap.
I've configured my system to mount sda4 as /home/user as the system boots up, which puts all of my data on sda4.
My question is this. How do I access any data left in (sda3) /home/user? (Because trying that won't work). Is there some way to use a direct path? Like /device/sda3/home/user?
General :: How To Mount HDD And Copy Data To Server
Apr 12, 2010I have a HDD that cannot be bootup (should be the boot file problem, I want to get back the data in it, so I plug it to another server and trying to copy the data from the failure HDD to this server. Now, the server is re-boot and in maintenance mode as the HDD cannot do the system check. when I try to copy data, it pops the server is read-only system.
1. How to let me write data to the server ; or
2. Let me boot up the server, then I will mount the HDD to it and copy the data to the server.
Ubuntu :: Mount A RAID Drive Without Deleting Data?
Jun 1, 2010I had to recently reinstall ubuntu because 10.04 started acting up on me. I reinstalled 9.04 but I don't know how to mount my RAID drive without messing with the data that's already on there. I have the UUID for the RAID but fstab isn't able to find it. I also previously used RAID software but I don't remember which one I used. how to mount my drive so that ubuntu can see it?
View 5 Replies View RelatedGeneral :: Mount 2nd Hard Disk Without Erasing Data?
Jan 26, 2010Is it possible to mount a 2nd hard disk without erasing the data that is already on it? If so, what command must I enter. The system recognizes that the disk is there, I just can't access the data because it hasn't been mounted.
View 5 Replies View RelatedServer :: Mount Raid Device To Recover Data?
Aug 20, 2009In a nutshell, our RAID 1 array was rendered broken and we were advised that core lib files were missing and the OS needed to be reloaded... a quote from our server host:"The OS is not healthy.This server will need a reinstall.
Libs are missing." This was after having replaced what we though was a faulty /dev/sdb. So they reloaded the OS (Debian 5.0.2 x86_64) on 2 FRESH drives, and installed the old /dev/sda as /dev/sdc once the reload was completed. Here's the output of /etc/fstab on the fresh install so we know what we're working with:
Code:
debian:/BAK# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
The one problem I see myself running into is /dev/md1 and /dev/md2 are currently in use by the new system, so I cannot mount it there. I should also note, reloading the OS is a viable option if needed as we haven't started configuring the server yet. So if we need to reinstall the OS and assign the NEW RAID arrays to something other than /dev/md1 and /dev/md2 then we can do that.
Server :: Nfs - Mount Shared Data From Client Machine
Feb 9, 2010i have installed nfs server on my redhat machine.when i want to mount shared data from client(suse)machine the following error occur. "mount.nfs: mount to NFS server '10.3.31.146:/home/usbtest' failed: System Error: No route to host" both machines ping each other successfully.
View 1 Replies View RelatedFedora :: Write A Shell Script Which Will Mount The Data HDD On Boot?
Jun 18, 2011I using fedora 14 and two HDD one for O.S and other for data. I manually mount the data HDD each time I put on my PC I want to write a Shell Script which will mount the data HDD on boot.
View 4 Replies View RelatedOpenSUSE Hardware :: Mount The Old Partitioned Drive With All Data As A Slave
Mar 15, 2010I want to mount the old partitioned drive with all my data as a slave and then transfer to the new system. Have fiddled around with settings in fstab without the required result. As I remember, disk was partitioned with home, root and swap.
View 5 Replies View RelatedUbuntu :: Suddenly Unable To Mount Ntfs Partition, Which Has All Data?
Aug 30, 2010After re-installing cups to deal with a printer problem, now I'm suddenly getting the message "Unable to mount Windows NTFS", which has all my data on it.
View 2 Replies View RelatedUbuntu :: Cannot Mount Win95 FAT32 Imagefile For Data Recovery
Mar 4, 2011I am tryiing to recover data on an iPod Classic hard drive which will not sync anymore with iTunes. I pulled the drive and connected it directly to the usb port on my Ubuntu system.
I used ddrescue to image the drive and fdisk -l to try to understand where the partitions were. I got the following:
Disk /dev/sdg: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
Ubuntu Servers :: Hard Disk Filling Up \ Mount /var/log/data To New HDD?
Mar 16, 2011I have a directory /var/log/data its about 80 GB,It filling up quit rapidly.I don't have much space left in the system them So i will attaching another External HDD.My question is that i need to mount /var/log/data to new HDD.So i have old data and pulse new coming up.I don't want to copy data from /var/log/data then mount new HDD to /var/log/data you know what i am taking about is there a simple way like linking or any other.
View 4 Replies View RelatedUbuntu :: Flash Drive Mount Path To Store Data?
Apr 21, 2010I am trying to setup my ubuntu machine to automatically log some data I am trying to collect and write the data to a flash drive. I have everything setup so that when the machine boots up it starts that logging process. The problem I am having is that sometimes (not always) ubuntu creates a directory with the same path that I expect my flash drive to mount to i.e., /media/data/ then my flash drive instead mounts to /media/data_/. I need to know the path of the flash drive so I can store my data on it.
View 2 Replies View RelatedUbuntu :: Drive Formatted - Mount Partition For Disk Data Recovery
Nov 1, 2010I accidentally formatted a 2TB drive of mine (big oops), but have recovered 2 of the 3 partitions using testdisk. My third partition is a LUKS encrypted partition. Testdisk managed to recover a piece of it, but it won't mount as most of it is unallocated. The partition originally occupied all space from sector 2,930,272,065 to the end of the disk -- sector 3,907,024,064. That is about 473 GBs. Currently, the partition only uses space from sector 2,930,272,065 to 2,930,288,129, about 7.84 MB.
The rest of the space is unallocated. Now what I need to do, is to expand the partition so that it occupies all the space that it used to. How would I do this? I cannot resize the partition, cause it would try to recreate the filesystem AFAIK and I don't want that, as it will fry my data. My data is not terribly important, but I would rather have it then not. I attached a screenie of kpartitionmanager. The partition in question is /dev/sdb2.
General :: Mount A Hard Drive With Pre-existing File System And Data?
Mar 23, 2010I had a drive that kept kernel panic'ing so my data center recommended using the spare hard drive to reinstall OS on, and import the data from the old drive. (they checked the hardware, it wasn't the hardware) The new install is done, and I need to mount the old drive and get backups off it since my data center does not provide management whatsoever.
It's the same OS on both (Cent OS 5.4 32-bit) I'm an advanced user on windows, but linux gets me. I can ssh in, do basic stuff like setup IP ranges and restart services. I normally navigate the box through SFTP so I have a gui. WHM shows me my drives as such
Found Disk: hda
Found Disk: sdb
so I'm assuming SDB is my old drive and the drive I need to access. I attempted to follow instructions on
cyberciti.biz/faq/freebsd-adding-second-hard-disk-howto/
but I'm assuming FreeBSD would work differently and I wasn't totally sure what the labels of the file systems should be.
Fedora Hardware :: Trying To Mount Drive - Create An Ext4 Partition To Move The Data
Jun 12, 2010I just installed F13 x86_64 on a system that used to be running Windows 7.
The boot drive is a SATA drive attached to the motherboard which is working fine.
However, my data drive is an NTFS partition filling a 3.6TB SATA raid.
It's GPT--Gparted sees 3 unknown partitions, and gdisk shows:
Code:
How do I mount this in Fedora 13? I had intended to shrink the NTFS partition so that I can create an ext4 partition to move the data to. Will this be possible?
I've got a LOT of valuable data on this drive, and nothing else big enough to store it.
Ubuntu :: Auotomount Hard Drive - Can Get The Backups HD To Auto-mount On Startup But Not The Data HD
May 3, 2010Dropbox will not start properly because my Lucid installation is on a SS HD (/dev/sdc) but my data, including my Dropbox folder is on an internal NTFS-formatted HD (/dev/sda), and I also have another internal HD for backups (/dev/sdb).
For some reason I can get the backups HD to auto-mount on startup, but not the data HD. My fstab file looks like this:
General :: USB NTFS Disk Suddenly Won't Mount - Partition Gone / Repair It And MBR Without Losing Data?
Sep 12, 2009Just ran into an uncomfortable problem. I usually never save any documents on my machine, and keep all my stuff on an external USB hard disk. (an 80GB TrekStor DS microdisk q.u)
Well yesterday this disk just would not mount.
Read through related posts but nothing seemed to work. Even tried it on a Windows machine.
Tried TestDisk utility. Found nothing wrong with the drive, but still could not repair the MBR.log code...
Palimpsest Utility recognized the drive, but just will not let me do anything with it except format it.
How can i repair the partitions and MBR without losing all my data?
CentOS 5 Server :: Can't Mount Ext4 Filesystem In Centos 5.6?
Sep 7, 2011Summary of issue: EXT4 filesystem won't mount--with error = mount: unknown filesystem type 'ext4'. Is no ext4 in kernel the issue? Or is something corrupted?Really perplexed by this. I updated Centos 5.5 to 5.6 to get ext4 (5.6 is supposed to have full support of ext4). I built several arrays and put the ext4 filesystem on them. All went well until I tried to mount them. BTW, this array (below) is set up as a RAID6 using partition 1 of #8 2TB drives.Bear with me here; just trying to be complete and not waste your time.
Attempting to mount give this:[root]# mount -v /dev/md1 /asc/array1mount: unknown filesystem type 'ext4'Note: it does "fake" mount with ption (which apparently does everything except the system call):[root]# mount -f -v /dev/md1/dev/md1 on /asc/array1 type ext4 (rw,grpquota,usrquote)e2fsprogs:Package e2fsprogs-1.39-23.el5_5.1.x86_64 already installed and latest version (for Centos 5.6; CentOS 6x uses the 1.41...)
Ubuntu Installation :: Can Recover Data After 'kernel Panic Not Syncing Vfs Unable To Mount Root Fs'
Aug 5, 2011I need to recover some data of the 'home' directory after kernel panic.I was upgrading ubuntu 11.04, [COLOR=blue !important][COLOR=blue !important]installed[/COLOR][/COLOR] on usb.Failed to upgrade because the main partition had no more space. I moved one directory of about 100Mb to other partition, but it seemed that in the main partition didn't appear those 100Mb free. i restarted the computer expecting those 100Mb free. And kernel panic.
[ 0.789567] Kernel panic - not syncing: VFS: Unable to mount root fs on unknow-block(8,1)
[ 0.789646] Pid: 1, comm: swapper Not tainted 2.6.35-22-generic #33-Ubuntu
[ 0.789716] [<c05c6468>] ? printk+0x2d/0x35