Ubuntu Installation :: Can't Mount Data Drives
Jan 9, 2011
I installed 10.10 on my workstation but now my system refuses to mount two existing two data drives that were already there... sudo mount /dev/sdc /mnt/data-b gives me: mount: unknown filesystem type 'isw_raid_member'
I didn't change any BIOS settings... My BIOS is not configured for RAID at all, that setting reads AHCI, which should be okay for my kernel (using the stock 2.6.35-24).
I tried to force mount one of the drives with sudo mount -t ext3 /dev/sdc /mnt/data-b
but this gives me an even stranger message:
"/dev/sdc already mounted or /mnt/data-b busy (neither of them are true...)
It's mainly the "isw_raid_member" thing that troubles me... I didn't and don't have a RAID system at all..
View 1 Replies
ADVERTISEMENT
Feb 13, 2010
Just moved to Ubuntu from XP. Whole process has gone very smoothly, but left with a small problem (i.e. it isn't actually affecting usability) that I don't seem to be able to fix and can't find on forums/internet. I also have a problem with the Floppy drive, but I've seen that problem elsewhere in the forums.
It's a dual boot system with both NTFS and Ext4 drives. All are visible and fully accessible. I decided to convert one of the NTFS drive to Ext4. That appeared to be successful and was successfully remounted as an Ext4 drive. The drive label is "Data". I did have a bit of a problem getting it remounted so that I could see/use it under my log-in as opposed to just under root. It's at this point I think that I did something to create the problem.
I now have two entries for "Data" in drop down menu for Places. The true one is shown as a standard hard drive icon, but the false one is shown as a different icon - possibly an external drive icon (note that the floppy drive is also showing as the same icon and I can't access that, but I've seen that's a problem elsewhere in the forums).
I can write and read to the true "Data" hard drive. If I click on the other false "Data" icon, I get the message "mount: /dev/sdd1 already mounted or /media/Data busy mount: according to mtab, /dev/sdd1 is already mounted on /media/Data". If unmount the true drive and try to mount the false drive, the system mounts the true drive instead. If I log into nautilus as root, neither the false data drive or the floppy appear in the left hand panel.
View 9 Replies
View Related
Jan 28, 2010
i have recently setup and installed Ubuntu 9.04 on a virtulal drive usingVMWare 6.04, installed the desktop gui as well, I need to add other drives for data and loggng, which I did in the VMWare side. I can see the 2 drives in ubuntu, but can not access them, I get he unable to mount location when I try. How can resolve this please as I need these to virtual drives to be used as data drives.
View 1 Replies
View Related
Jul 5, 2010
-I upgraded my Ubuntu install and the system boots except it ignores my two data drives. I get a prompt to continue waiting, skip or manually recover. If I skip I boot into Ubuntu. The fstab entries for the data drives are:
[Code]....
I booted with a knoppix cd and both drives are found and contain data. What steps can I take to remount these drives and recover the data?
View 4 Replies
View Related
Oct 21, 2010
I'm using windows 7 now and I want to install ubuntu as the main OS to the current C:drive(which has installed windows currently) but with keeping the data in other ntfs drivers(D:, E:, F: ) on my hard disk. I can't take backups of all data in other drivers and if that data erased with ubuntu installation I will face a very big problem in future. So how to install ubuntu 10.10 only for a one drive(c: drive) without erasing the data on other ntfs drivers? and I uses nvidia 8 series graphic card and are there any special things to follow to install it's official linux drivers(.run) or is it enough to use default drivers on ubuntu.
View 2 Replies
View Related
Mar 20, 2011
I installed fedora on one of my three hard drives and it seems that something went wrong with the other two. Fedora recognizes the other drives but it seems the data on those drives is not there anymore. The below images are screen shots from my computer folder and disk utility program. I tried to look through Fedora documentation but I did not find a solution to my case.
View 14 Replies
View Related
Apr 30, 2010
After a bit of a rough install, I got 10.04 up and running on an Intel D845GRG motherboard. All seems to be working fine except for USB flash drives. My USB mouse and keyboard work fine, but the two sticks I have (Kingston and PQI) will not mount.
View 4 Replies
View Related
Mar 10, 2011
a few days a go I got Samba messed up and I decided to just reinstall Ubuntu. Ubuntu resides on an 80GB drive and I have 2 1.0 TB drives that I use for storage. At one time (pre-Ubuntu) they were connected to a VIA SATA RAID card and I had them on a software RAID under Windows XP. Both worked absolutely fine under Ubuntu 10.04 (which had bee progressively upgraded from the original install of 9.04.
Now, both drives have been given the same label, and neither one will mount because the file system type is reported as "via_raid_array" rather than the EXT4 that they both should be. TestDisk can read them and identifies the partition as a Linux partition, and the data seems to be there. I have even reformatted one of them and still, it will not mount.
View 3 Replies
View Related
Jun 21, 2010
I recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies
View Related
Feb 23, 2010
Since I never got an answer to my last question:I'll ask something simpler. When Ubuntu is booting up, what directories are used for the boot process up until it mounts other drives (such as an SD card).hink that question makes sense,don't hesitate to ask forclarification, though.
View 6 Replies
View Related
Apr 7, 2010
Is it possible to use network storage locations as mount points during installation?
cause i want to separate system (ubuntu) with data (personal files).
eg. if i have 5 computers i don't want to recreate /home/david 5 times.
so i want to mount networkdrive/home to /home in local ubuntu server.
so ALL users home folders could be used and maybe also networkdrive/projects to /projects.
in that way its ok if i by accident repartitioned the local ubuntu server cause all data is not there on that server, but in the data server.
is separating "data" from "logic" good in this case?
and is it possible? what protocol should i use for the mapping over internet? (maybe the server is in Sweden, and the data is in Norway).
View 1 Replies
View Related
Feb 10, 2011
I just switched to Debian 6 from Mepis 8.5. When Debian loads, it doesn't recognize or mount my external hard drives.
View 4 Replies
View Related
Jul 14, 2010
A few months ago I have setup a server with three hard disks. The partition mapping the disks as follows:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x7ca36fee
[code]....
Now I have the following problem the LVM file system don't mount properly.If I open the mount point I see only a few files of the LVM disk. If I want to unmount the disk I get the following error:
umount /data/
umount: /data/: not mounted
If I want to mount the volume I get the following error:
mount -a
mount: /dev/mapper/gegevens-Data already mounted or /data busy
View 3 Replies
View Related
Aug 5, 2011
I need to recover some data of the 'home' directory after kernel panic.I was upgrading ubuntu 11.04, [COLOR=blue !important][COLOR=blue !important]installed[/COLOR][/COLOR] on usb.Failed to upgrade because the main partition had no more space. I moved one directory of about 100Mb to other partition, but it seemed that in the main partition didn't appear those 100Mb free. i restarted the computer expecting those 100Mb free. And kernel panic.
[ 0.789567] Kernel panic - not syncing: VFS: Unable to mount root fs on unknow-block(8,1)
[ 0.789646] Pid: 1, comm: swapper Not tainted 2.6.35-22-generic #33-Ubuntu
[ 0.789716] [<c05c6468>] ? printk+0x2d/0x35
View 2 Replies
View Related
Sep 5, 2010
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies
View Related
Sep 1, 2011
So WINE did an excellent job at finding my C:, but I also have 3 other drives that are NTFS partition and WINE isn't detecting these drives at all. How do I make WINE detect these drives?
View 1 Replies
View Related
Jan 15, 2011
I am in the process of recovering data from some damaged hard drives.
I am copying the data to a recovery folder on the safe system disk where it is being sorted.
Some of the data/files I do not want to keep.
I want to delete them.
However the permissions are such that it will not let me.
I need to be root.
I don't really want to flaff about in the 1980's geek terminal environment ... just want to right click and select delete.
Is there any way within the GUI to be as one with Root, all powerful, all seeing ......
View 3 Replies
View Related
Feb 25, 2011
I am using software RAID in Ubuntu Server Edition 9.10 to mirror(RAID1) two 1TB harddrives. These are used for data storage and websites.I also have a 80GB harddrive for the operatigsystem. This drive has no backup or RAID at all. Should this drive crash and the system therefore to become no longer bootable, will I be able to recover the data the 1TB drives or should I backup the 80GB drive as well?
View 3 Replies
View Related
Feb 25, 2011
I have 2 external drives that I'm using for movies and they're both formatted to fat32. The problem I'm experiencing now is that some of the high quality mkv files are not able to be moved to the drive because of fat32's limitations.
I'd like to convert to ext3 (or 4) and I wanted to check to see if I can do it without having to reformat and without loss of data.
View 4 Replies
View Related
Jul 18, 2010
I have a Linux CentOS server.Is there a way to store all changes made to the hard drive by all software on the server ?
View 14 Replies
View Related
Mar 29, 2010
I have heard of a linux based data recovery for hard drives (corrupt) its bootable and once loaded and booted it will scan for drives and show there contents and let you pick and choose which ones you would like to back up/ save to a disk so you can wipe a drive and keep your info but I cannot remember the name of it.
View 5 Replies
View Related
Jan 21, 2010
i used to mount my drives in ubuntu..How to mount all the drives permanently?
View 2 Replies
View Related
Feb 1, 2010
ubuntu 9.10 when I try to mount internal drivereceive the following massage Error mounting: mount exited with exit code 1: helper failed with:Remounting is not supported at present. You have to umount volume and then mount it once again
View 9 Replies
View Related
Feb 15, 2010
I tried setting up my own partition table which apparently didn't go well.I have 1 compactflash-disk for linux and 2 hard drives for data which are set up for RAID1. But the RAID-drives doesn't get mounted.This is my first RAID-setup
Code:
me@server:~$ df -h
Filesystem Size Used Avail Use% Mounted on
[code]...
View 4 Replies
View Related
May 3, 2010
I like the 20 second boot from press of power button with my new install, BUT I can't mount drives with xfce's thunar. I can mount them with thunar but this way they still do not show up under places or on my desktop. How do I figure out how to mount them properly?
View 9 Replies
View Related
Jun 16, 2010
How can I auto mount all my drive at start up, I want them to be auto mounted.
View 4 Replies
View Related
Aug 8, 2010
I am having problem mounting my 2nd hdd and external hdd, it keeps giving error msg saying only root can do it.
rudy@rudy-desktop:~$ sudo fdisk -l
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I am having problem with sdb1 (SFS file system ?) and sdc1 (external hdd)
View 1 Replies
View Related
Aug 30, 2010
Quote:
The other one mounts fine. They are all separate physical drives. Another oddity is in that it lists those two drives which are SATA as PATA, but I imagine that is something to do with my BIOS settings being on compatibility settings.
View 1 Replies
View Related
Apr 12, 2011
I have recently installed Ubuntu 10.10 on my machine as dual boot using WUBI but on a seperate partition to Windows. Loving it so far, but i cannot get any external drives to mount - i've tried pen drives, camera memory cards and hard drives but nothing comes up.
I have just tried restarting with a pen drive plugged in, and it finally showed something in the computer folder - "memory stick drive" is shown (and my internal CD drive, which i'm not sure was there before.), but i still can't access it and when I try to unmount it gives me the message
Error detaching: helper exited with exit code 1: Detaching device /dev/sdc
USB device: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1)
SYNCHRONIZE CACHE: FAILED: No such file or directory
(Continuing despite SYNCHRONIZE CACHE failure.)
STOP UNIT: FAILED: No such file or directory
[Code]...
View 3 Replies
View Related
Dec 10, 2010
I have an Acer Aspire 3500 laptop that I'm running 10.04 on, pretty much everything works OK, and I don't appear to have any hardware problems (I've checked using Gnome Device Manager). When I plug in a USB flash or hard drive, I don't get any drives/devices to mount, although in Gnome Device Manager the USB device appears as a USB Mass Storage Device.
Running tail -f /var/log/messages produces this:
Dec 10 19:44:31 darren-laptop kernel: [ 5800.632058] usb 1-3: new high speed USB device using ehci_hcd and address 4
Dec 10 19:44:31 darren-laptop kernel: [ 5800.765161] usb 1-3: configuration #1 chosen from 1 choice
View 4 Replies
View Related
