CentOS 5 :: JMicron 250 - Ethernet EEE BOX Asus B202?
Dec 10, 2009
My problem is for the driver of controller ethernet jmicron jmc250. My version of Centos is 5.2, included in PBX In a Flash. I Have the original driver but these don't work and nic is not recognized. I downloaded the version of centos 5.4, but the nic is realy recognized but if tape ifconfig eth0 the message is device not found. The hardware is ok, infact this hardware work regularly in wondows for example.
the driver location : [URL]
View 14 Replies
ADVERTISEMENT
Oct 29, 2010
I've installed a new fresh Centos 5.5 ..and after a lot of work..something starts to work (X now works with the new ATI HD5145 using ATI drivers) but i've a serious problemThe ethernet controller JMC250 JMicron PCI EXPR. doesent work at all so my notebook is out of the world !!!Here is some infos:rpm -q centos-release
centos-release-5-5.el5.centos
rpm -qa kernel* | sort
kernel-devel-2.6.18-194.el5
[code]....
View 6 Replies
View Related
Dec 4, 2010
installing drivers for my onboard NIC card on my ASUS Nettop EB1007. The NIC is a JMC250 PCI Express GB. I first installed CentOS 5 on it and then it wouldnt show up. So I decided to try installing with Ubuntu and it was perfect. I didnt have to do anything else to get it detected. However, I would like CentOS 5 on this unit to practice on. Below is my attempt to install the kmod-jme-1.0.6.1-2.el5.elrepo.i686.rpm on a fresh CentOS install. Unfortunately, the dependencies are failing.
[root@localhost media]# mkdir /media/usb
[root@localhost media]# mount /dev/sdc1 /media/usb
[root@localhost media]# cd /media/usb
[root@localhost usb]# ls -a
[Code]....
View 3 Replies
View Related
May 4, 2009
I was try to compile the drirver from cd asus, but my lan card still not detected in centos 5.3. when i bringing up eth0 its show like : "the atl2 device eth0 does not to be present, delaying initialization."iwas suft on google some driver but all driver just to centos 5.3 when i install the rpm it does not work. i love centos i dont want to change my lovely centos.
View 10 Replies
View Related
Oct 15, 2009
Cent Os 5.3 64bit dosen't recognise the network card ASUS NX110113f0:1023 (rev41)here are some details about the system,
# lspci | grep ther
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
[code]....
View 6 Replies
View Related
Mar 23, 2009
Centos 5.2 Asus Eee box with Atom N270 and it came installed with "eLinux" which doesn't even come close to meeting my needs (low demand intranet server). But eLinux did work as far as I tested it.
First, CentOS seems to detect the Intel 945GME video chip but I end up with a blank screen. I used text mode to install CentOS. Then I searched for a solution. Found someone suggested also using the i915 driver with 945GM. That didn't work.
So, I reverted to a VESA driver. That worked except I couldn't get resolution greater than 800x600 even after I added a Mode line for 1024x768 to the xorg.conf file. However, the X interface wasn't that important. I mostly wanted into the utilities so I could fix the network.
I had tried a fixed address (192.168.1.11) since the box is supposed to be a "thin server." No luck. So, I tried DNS and tried activating again. The suggestion was that the network cable wasn't connected. When using DNS, the network hub lights flash. Something is happening.
Rebooted the computer using Puppy Linux (on a usb key). Video comes up in VESA mode. I can set it to 1024x768. It found the DNS server without any complaints. (Note: I didn't so much as touch the ethernet cable during the reboot).
Copying and Pasting isn't easy with a computer that won't connect to the LAN. But the hardware is a Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 2). I since tried Slackware 12.1 and it's pretty happy on that box. Vesa mode gets me 1024x768 and the ethernet works (however it thinks it's on eth1 which may or may not be a clue). I'll try CentOS on an old box for other testing.
View 6 Replies
View Related
Apr 28, 2009
I'm running a fresh install on an intel i7 system on an asus p6t deluxe v2 motherboard with the onboard NIC (Marvell Technology pci-e). I know the NIC is working as when I boot into the onboard OS that Asus provides (Asus Express Gate SSD)I have a working net connection.Booting up CentOS hangs at determining IP information for eth0 and eventually fails with the following error:PING xxx.170.30.1 from xxx.170.31.231 eth0: 56(84) bytes of data---xxx.170.30.1 ping statistics ---4 packets transmitted, o received, +3 errors, 100% packet loss, time 2999ms, pipe 3 failed.
RTNETLINK answers: file exists.
RTNETLINK answers: file exists.
RTNETLINK answers: file exists.
[code]....
View 14 Replies
View Related
Aug 6, 2009
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies
View Related
Sep 16, 2009
I have inserted ASUS NX1101 in CentOS. But it not detecting. Card is a new one. What to do?
View 19 Replies
View Related
Dec 21, 2009
I have installed CentOS 5.3 on my PC which has an Atheros AR8121/8113/8114 Gigabit Ethernet. Unfortunately 5.3 has no drivers for this LAN Card. I searched the Google for drivers but was unable to find any. Does the 5.4 has them? If yes then how can i upgrade it to 5.4 without Network connectivity?
View 11 Replies
View Related
Sep 13, 2010
I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
View 5 Replies
View Related
Jun 25, 2011
i have a centos 5 and i cant access to the LAN or Internet because , i cant create a network connection , i try to say My Ethernet dont appears,and i cant add any connections.i id thisTerminal:Quote:sudo iwconfig
View 4 Replies
View Related
May 4, 2009
I am using asus p5ld2-x/1333 motherboard,I installed the centos ,Centos saw other drivers but didn't see ethernet card.I am not connection the internet.
View 2 Replies
View Related
Feb 10, 2011
Pl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies
View Related
Oct 7, 2010
I'm trying to get a GBB36X (Gigabyte-rebranded JMB36X) RAID0 controller to work in F13, with no success. When I run dmraid, here's what I get:
Quote:
# dmraid -ay -v -d
DEBUG: _find_set: searching jmicron_GRAID
DEBUG: _find_set: not found jmicron_GRAID
DEBUG: _find_set: searching jmicron_GRAID
[code].....
View 2 Replies
View Related
May 28, 2010
I have recently had a problem with my 10.04 server machine. It will not boot, it seems to be taking forever on the loading screen (normally headless server, but I connected monitor when I couldn't ssh), but that's not why I'm here.
Knowing that I do rsync backups every night at midnight of my machine I just bit the bullet and formatted my / partition. Reinstall went fine, I turned off automatic updates (I suspect an update caused the problem) But now I cannot mount my jmicron raid 1, which is where my rsync backup is (doh!).
sudo fdisk -l
Code:
WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
[Code]....
View 2 Replies
View Related
Jan 31, 2011
Got my new Sager NP8150 with
Code:
lspci | grep -i net
03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
04:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
Installed Ubuntu 10.10
The Wifi Intel Corporation Centrino Ultimate-N 6300 works out of the box, but the JMC250 does not work.
Code:
root@ubuntu:~# ethtool -i eth0
[Code]...
View 9 Replies
View Related
Dec 2, 2009
things "seem" to work, first time I've really ever used dmraid (usually mdraid), but I'm worried about this error
dmraid -ay
RAID set "jmicron_STORAGE2 " was activated
The dynamic shared library "libdmraid-events-jmicron.so" could not be loaded:
libdmraid-events-jmicron.so: cannot open shared object file: No such file or directory
Two things, why no matter what I name the RAID in the jmicron bios is puts a bagillion spaces after it, and second, I cannot find the missing lib anywhere I've installed all the dmraid* packages.
View 3 Replies
View Related
Jul 24, 2009
I need to put a pc together for home use to act as my server. I need recommendations for a asus motherboard. I need it to support 5.3 and looking at asus website I cannot for the life of me figure out what I need. I also want to use a amd cpu. It has been years since I built my own pc and never for linux
View 3 Replies
View Related
Feb 24, 2010
I cannot get sound from a machine that has the M4A785-M motherboard, and a Radeon HD 4670..
My details are at: [URL]
View 7 Replies
View Related
Aug 28, 2009
OS Version: CentOS 5.3
Motherboard: ASUS M3A78-CM (BIOS v.2003)
I have a single disk running the base OS and just installed 2 x Seagate 500GB SATA 3.0 drives in a RAID1 set that I would like to use for data storage. The OS sees the drives individually but not the RAID. Has anyone worked with a similar board and has any ideas what I need to do to get the OS to recognize the RAID1 array?
View 1 Replies
View Related
Mar 3, 2010
Just installed CentOS 5.1 and it's not detecting my NIC. ifconfig produces nothing for eth0. This is a xen kernel.
I can't tell exactly what NIC this motherboard uses, the ASUS website doesn't seem to think we need to know anything more than that it's a PCIe Gigabit lan:
[URL]
lspci indicates it's an Atheros AR8121/AR8113/AR8114.
View 5 Replies
View Related
Feb 12, 2009
I have PC with motherbord P5KPL-AM (latest ver. BIOS), and i want installation CentOS 5.2.But can't screen attaching....
View 5 Replies
View Related
May 19, 2011
djmack-5/19/2011-I have purchased an ASUS K52J (intel i7) laptop. I have installed Centos 5.5 (64 bit) from CDs. The I got all the updates and it's now up to 5.6. I have two problems.
(problem-1) - Using the GUI (System->Administration->Hardware) I can get to a Device Manager screen. It shows a JMC250 PCI Express Gigabit Ethernet Controller. Using the GUI (System->Administration->Network) I can only see the wireless (wlan0) as configured and active. The ethernet card is not seen as ether 0. I've seen there are downloads to solve this problem, however I've been 100% unable to do and or understand them. I don't know how to build the kernel and I don't have any source code. I only have the binaries (I think). Is there a version of the kernel that I can put on CDs that has understanding of the ether card I referenced above?
P.S. I've downloaded a binary fix and it says it needs 20 or so dependencies (I have zero idea how to get those).
P.S. I've downloaded a source fix and I couldn't get it to install (I'm not a linux kernel build knowlegable person). I don't have the source either.
(problem-2):As stated above I need direct (RJ45) access to the laptop. I currently have the wireless card working but I have no idea how to get this to work with httpd, ssh, scp.I can access things via a web browser right on the laptop. I cannot access this laptop via a web browser from any other box. I cannot access this box via ssh or scp.I disabled the firewall and I disabled the SELinux security.I am stumped as to why I cannot see this ASUS laptop via httpd and/or ssh/scp.I can ssh and scp to other linux servers but these servers cannot ssh or scp into this laptop.
View 1 Replies
View Related
Apr 8, 2010
I am trying to clone a working Centos 5.4 system onto a new box with a ASUS P5KPL-CM motherboard. I have done so by plugging in a Realtec lan card - but can't get the motherboard lan working. Googling tells me the motherboard has a Atheros L1E lan chip - but I have installed several kmod drivers from ELREPO - but still can't get the on-board lan working. So far I have installed:
kmod-atl1e
kmod-atl1
I have just installed these with yum - but no new hardware appears in the network gui dialogue. Am I missing some step here - or is there another driver I should be looking for.
View 5 Replies
View Related
Jan 20, 2011
The situation: computer based on Asus P6T motherboard. Two RAIDS:
- 'boot', on motherboard built-in RAID controller (CentOS 5.5 installed on this RAID)
- 'data' on 3dware RAID card
At one moment a CPU fan fails and the system halts. After the fan is replaced, BIOS informs it's reset and all the inner controller data are forgotten. After I switch it to 'RAID' mode, it remembers it was a mirror raid (RAID 1) installed, but the file system on it is completely trashed.
The 'data' RAID run by external controller isn't affected by the system failure. Three questions:
- is it worth trying to install OS on the rebuilt 'boot' RAID once again? Looks like if BIOS settings are lost for some reason, there's chance of completely losing RAID data
- has someone encountered similar problem with built-in RAID nd was it possible to recover data?
- will the software RAID be worth creating instead of using hardware RAID to replace the 'boot' drive?
View 2 Replies
View Related
May 19, 2009
i did configure as it was advised on [URL]... but it didn't work. for eg I added eth0:1 and eth0:2 on /etc/sysconfig/network-scripts/ when i do ifconfig i can see only eth0:1, i cannot see eth0:2, eventhough i configured as it was on the tutorial
View 4 Replies
View Related
Jun 25, 2009
I 've try to detect my Gigabyte onboard ( rtl8111/rtl8168B) on centos 5.0 but there are error on make module clean. But If I install with mandriva 2009, Every things run oke.
View 3 Replies
View Related
Feb 9, 2010
I am attempting to install centos5 x86_64 on to an HP Compaq 6820s laptop.It appears the installation has gone ok but I have a big problem in that the centos installation knows nothing about the hardware on the laptop. i.e. it does not recognise the eth0 ethernet card.this means that I have no way of assigning an IP address to the laptop which means that it cannot join the network or the internet.how do you go about getting the correct drivers for the hardware that you are using?
View 11 Replies
View Related
Nov 23, 2010
I'm trying to connect my newly installed CentOs 5.5 to the network. But although there is a cable connection that has worked well before with other distributions, the network configuration keeps telling me:"Determining IP information for eth0... failed; no link present. Check cable?"Here are the results of the /.getinfo network script:This is a university network that is working well for thousands of students, so the problem is not on the side of the network or the DHCP server.The wireless card is also not shown in the network configuration.
View 1 Replies
View Related
