Got my new Sager NP8150 with
Code:
lspci | grep -i net
03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
04:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
Installed Ubuntu 10.10
The Wifi Intel Corporation Centrino Ultimate-N 6300 works out of the box, but the JMC250 does not work.
Code:
root@ubuntu:~# ethtool -i eth0
[Code]...
installing drivers for my onboard NIC card on my ASUS Nettop EB1007. The NIC is a JMC250 PCI Express GB. I first installed CentOS 5 on it and then it wouldnt show up. So I decided to try installing with Ubuntu and it was perfect. I didnt have to do anything else to get it detected. However, I would like CentOS 5 on this unit to practice on. Below is my attempt to install the kmod-jme-1.0.6.1-2.el5.elrepo.i686.rpm on a fresh CentOS install. Unfortunately, the dependencies are failing.
[root@localhost media]# mkdir /media/usb
[root@localhost media]# mount /dev/sdc1 /media/usb
[root@localhost media]# cd /media/usb
[root@localhost usb]# ls -a
[Code]....
I've installed a new fresh Centos 5.5 ..and after a lot of work..something starts to work (X now works with the new ATI HD5145 using ATI drivers) but i've a serious problemThe ethernet controller JMC250 JMicron PCI EXPR. doesent work at all so my notebook is out of the world !!!Here is some infos:rpm -q centos-release
centos-release-5-5.el5.centos
rpm -qa kernel* | sort
kernel-devel-2.6.18-194.el5
[code]....
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
Target hardware is a Sager NP8170 laptop which uses an Intel core i7 CPU and the HM67 chipset. This laptop uses UEFI instead of BIOS. The laptop is configured to boot from the USB ports before booting from the optical drive and then the hard drive. The software I am trying to install is Fedora 15 x86_64. I want to perform the install using a USB drive. I do not want to use DVD media.
how to create minimal boot media as detailed here: [URL] Using dd, efidisk.img has been transferred to a 256MB USB disk. efidisk.img is about 103MB so it fits. I figured this USB drive would boot and take me to a command prompt of some sort but nothing happens. I see activity on the USB drive (flashing light) but then it stops and the laptop boots from the hard drive which currently has Windows on it.
There is $&*# for information on installing to a UEFI system. I don't even know if this efidisk.img USB drive is supposed to present me with a command prompt and from there I can kick off the Fedora installer from another, larger USB drive or the network or whatever. I really don't want to go back to optical media. Also, I burned the F15 x86_64 ISO to a DVD and that DVD does boot. I did not think the stock Fedora DVD version would boot on a UEFI system.
Alright this is my first post on here and I hope I got sufficient Information for you available. I ran Ubuntu based Distros before but this is the first time under a Debian based Distro for me. I got a newlaptop and this one does not seem to let me get my wireless to work after multiple efforts
My problem: My Intel Centrino N-6300 () does not seem to find any network connections.
My previous attempts: (Some of which required me to reinstall Suse)
1. I installed new kernels as my first assumption was that the kernel was not supporting it. I know now that it is supported.
2. I installed drivers from http://intellinuxwireless.org/ which was pointless.
3. I installed backports (THat was still under Linux Mint. Same problem there.)
4. I tried NDiswrapper without success.
5. I checked rfkill as you can see further down below.
Alright here are some of my info's I have collected so far. Let me know if anything is missing.
RFkill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code].....
I have recently had a problem with my 10.04 server machine. It will not boot, it seems to be taking forever on the loading screen (normally headless server, but I connected monitor when I couldn't ssh), but that's not why I'm here.
Knowing that I do rsync backups every night at midnight of my machine I just bit the bullet and formatted my / partition. Reinstall went fine, I turned off automatic updates (I suspect an update caused the problem) But now I cannot mount my jmicron raid 1, which is where my rsync backup is (doh!).
sudo fdisk -l
Code:
WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
[Code]....
My problem is for the driver of controller ethernet jmicron jmc250. My version of Centos is 5.2, included in PBX In a Flash. I Have the original driver but these don't work and nic is not recognized. I downloaded the version of centos 5.4, but the nic is realy recognized but if tape ifconfig eth0 the message is device not found. The hardware is ok, infact this hardware work regularly in wondows for example.
the driver location : [URL]
I'm trying to get a GBB36X (Gigabyte-rebranded JMB36X) RAID0 controller to work in F13, with no success. When I run dmraid, here's what I get:
Quote:
# dmraid -ay -v -d
DEBUG: _find_set: searching jmicron_GRAID
DEBUG: _find_set: not found jmicron_GRAID
DEBUG: _find_set: searching jmicron_GRAID
[code].....
things "seem" to work, first time I've really ever used dmraid (usually mdraid), but I'm worried about this error
dmraid -ay
RAID set "jmicron_STORAGE2 " was activated
The dynamic shared library "libdmraid-events-jmicron.so" could not be loaded:
libdmraid-events-jmicron.so: cannot open shared object file: No such file or directory
Two things, why no matter what I name the RAID in the jmicron bios is puts a bagillion spaces after it, and second, I cannot find the missing lib anywhere I've installed all the dmraid* packages.
I am having a heck of a time trying to find directions on networking my two computers together in order to share files. I have two machines running Ubuntu 10.10 Desktop & Netbook remix.
They are both connected to my wireless router to connect to the internet.
trying to bond two 3G modems but I cant Im really new in this matther so I really This is the error that appears
ubu@ubu-AOD255E:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface ppp0=ppp0.
[code]....
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedIm trying to make an ubuntu server box my entrypoint to my networking. Meaning itll function as a server, a firewall, and a gateway. so i already installed dhcp3 and a dns server.
I have 2 ethernet cards in it. So now i wonder, should i the second card into a router's modem/wan port and make the router a switch? or should i plug it into one of the routers lan ports?
I have 3 Dell Precision M4400 machines. After getting updates yesterday or today, I get random network dropouts like crazy, on wired or wireless. On one machine I was able to turn off ipv6 in grub and reboot, and it works now. However on the other 2 machines, still have the same problems. All 3 are running 9.10 64 bit. Is there a way I can back out the updates so the network works again? Anyone else see this behavior after updates today?
View 2 Replies View RelatedI'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies View RelatedI do have internet cause I am using it on W7. The only thing that I have done different is I left the pc on over night so I guess it went to suspend for the first time. Then I powered off. After turning the pc back on and logging in I have no internet. Not even with the Ethernet plugged directly in. There is supposed to be a little blue light on when it sees the wireless and that is off. When I click on the networking icon in the system tray it says networking disabled. It shows no wireless. When I plug directly in I still get nothing. I'm using 10.04
View 2 Replies View RelatedOk, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
I just started having a problem with my 10.04 laptop a few days ago, maybe Thursday, last week. When the computer is plugged into my home network (standard 192.168.1.1 sort of IPs) it works fine, but when I try to connect to my work network (130.15.90.XX) I am unable to pick up an IP. The router in my office is working fine, all the windows boxes can connect.
I've also noticed that when the computer is plugged in at work the notification icon for the networking indicates it is looking for a wireless connection (rather than the normal up/down arrows), even if wireless is deactivated
I can set a static IP in /etc/network/interfaces and everything works, so it seems to be a DHCP problem?
I'm using a Packard Bell Easynote Tn36 laptop, and I'm having trouble with Ubuntu 10.10 and the wireless network card, (probably because of lack of driver). I.e. it is disabled.
How can I enable it?
I input this code:
And here is the output:
Whenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..
OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?
I have a server with two ethernet ports. I configured eth0 to be static, set at 10.1.10.148. I plugged in another router into the other ethernet port in order to configure that router. I configured eth1 to use dhcp. Using /etc/network/interfaces rather than gnome network manager. When I did this, I lost internet connectivity (internet routes through eth0 of course)
- Why did I lose internet connectivity?
In order to recover internet activity, I had to disconnect the new router on eth1 of course, and do sudo ifdown eth1. That wasn't enough however. After rebooting numerous times and pulling out my hair, I finally tried configuring eth0 as dhcp, rather than static, and this fixed the problem.
- Why didn't sudo ifdown eth1 solve the problem? What information was saved between reboots that somehow remembered that I plugged in the new router? Because my thinking was if /etc/network/interfaces was identical, and the network topology was identical, after a reboot everything should be restored, but it wasn't.
I can connect to the internet and browse. I'm wired and using DHCP on a Windows network. Updating Ubuntu or downloading programs takes hours for 52MB of updates. Why? I read some articles that mention Network Manager needs to be enabled at the .conf file. Can I edit this using GUI or command line only?
View 9 Replies View RelatedI just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
I have Packard Bell easynote tn36 and I used to use ubuntu 10.10 and then when I upgrad it to ubuntu 11.04 the wireless doesn't work (disable) and I can't press the botton of Enable wireless.
View 9 Replies View RelatedI was having no problems (that I knew of) browsing the web since installing Ubuntu 10.10 a week or so ago. I was previously trialling Win7 as my customers will likely be using that in the future. Then I wanted to go to internode.on.net. Got the following: Quote: Firefox can't establish a connection to the server at internode.on.net. or Quote: Oops! Google Chrome could not connect to internode.on.net
As it was just after Christmas I thought it must be down, for upgrades or maintenance etc. I later tried to go to Freebsd.org; same error. I've been having a small number of other websites give the same error. I thought nothing of this until I tried it on my wife's macpro. I could log onto all the websites I wanted to and none gave any indication of having been down. Both boxes are on the same adsl connection. I still can't access internode or freebsd on 10.10 yet have been able to access every website on OSX. Now, I was only looking at them for info but am worried I won't be able to access something important. (so far everything I 'need' is working)
ping just drops out. edit: weirdest thing! I just retried and now can not emulate the problem for internode. freebsd still won't show. that is less than five minutes between problems and resolution! I hadn't even posted! But I still would like to have an idea of what is going on. Here is the ping error for freebsd: Quote:
[Code]...
I am attempting to setup and old BBSinside of DosBOXI've built one of the DosBOX Megabuilds, with the NE2000 patch.It uses libpcap in order to piggy back on top of the system's NIC. All of the dosbox side appears to be working.My system comes up, gets the MAC address i told it to use, i can load a packet driver in dosbox, all of that seems well and good. The issue, i think, is on the linux side. It's built on a Fedora 14 box. I'm getting the feeling that networking isnt getting out of the dosbox instance. Does it seem possible that fedora needs to have some config in place to link networking over to dosbox?
View 7 Replies View RelatedIve managed to install samba, I've shared a folder. I can access from a Windows 7 machine via \ubuntupublic. I can put files in the folder form the ubuntu machine and edit them on the windows box. I can put files in the folder/share from the Windows box but then I cannot edit them on the Ubuntu machine (they are read only and have a "Lock" over them). I can fix this by going to the properties of the file/folder in Windows and manually assigning "Everybody" full control (then the lock disappears and all is well.) I want read/write access to all the folders contents from both machines all the time (security is NOT a concern I WANT the permissions wide open) what am I doing wrong?
View 7 Replies View RelatedI have just finished installing 9.04 via USB onto an Acer Travelmate C110.For the record, 9.10 refused to even boot on this laptop. I used universal-usb-installer and unetbootin, both without success.The installation completed successfully, except that wireless networking is not enabled. Can someone please point me to the correct resource whereby I can get the wireless nic working.
View 3 Replies View RelatedAfter deleting part of the gnome config directories in order to reset gnome (GUI was messed up - No title bars, etc). I lost my bluetooth tethering to my Nokia N900. I cannot redo it as it always fails. Linking from phone to Laptop works, but cannot use it to link up to the internet then. Cable to the phone always worked up till now. Now I cannot get a connection as it stopped working after my upgrade to 11.04.
View 3 Replies View Related