CentOS 5 :: How To Upgrade ClamAV On Dell Machine
Apr 21, 2010
I am running Zimbra 5.0.2 with ClamAV and I need to upgrade clam anti virus. It's for a Centos 5.4, Dell PE 2950 machine. On their Wiki for upgrades at [URL]. They recommended either of the Red hat versions - Redhat 5.x 32-bit or the Redhat 5.x 64-bit. Are there any known problems using either of these two versions on my Centos machine? Also, want to make sure, I am assuming I need the 32 bit version, is this correct? I am asking because in the past I have learned sometimes it's better to not go with the RH versions on Centos, can't remember where I heard that, so I want to make sure before I do the install.
View 4 Replies
ADVERTISEMENT
Apr 30, 2010
I've had previous versions of Clam running and have kept the system uptodate with regular yum updates.
this recently upgraded ClamAV and this will not now start. code...
From googling all i seem to find that it's a make error, but this is a binary install!
I've removed and reinstalled also.
View 1 Replies
View Related
May 26, 2010
I am trying to upgrade my clam AV to latest 0.9.6.1. Last times I just uploaded to the server and used RPM command and it was installing. Now I cant find RPM for this ver. So I guess I need to prepare one.
I used the guide here:
Packaging software with RPM, Part 1: Building and distributing packages
by IBM
Changing all wget -> clamav
But when run this I got:
# rpmbuild -v -bb --clean clamav.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.74542
+ umask 022
+ cd /home/myclamav/BUILD
+ cd /home/myclamav/BUILD
+ rm -rf clamav-0.96.1
+ /bin/gzip -dc /home/myclamav/SOURCES/clamav-0.96.1.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd clamav-0.96.1
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ $'
'
: command not found542: line 35:
error: Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
Is there a better way to create RPMs? or Where do I get RPM for this version? I couldn't find it through their site.
View 3 Replies
View Related
May 4, 2010
After I did a safe-upgrade on my lenny system, clamav is now broken, which is quite a pain since my e-mail flow is now failing.
I get this in the log. CLAMAV: couldn't connect to: /var/run/clamav/clamd.ctl:
I have volatile in the list, and clamav is also installed from volatiel of what I can see, so what went wrong? Is the package broken?
[Code].....
View 2 Replies
View Related
May 7, 2010
Code:
* Starting ClamAV daemon clamd
WARNING: Ignoring deprecated option MailFollowURLs at line 33
ERROR: Can't initialize the internal logger
ERROR: Can't open /var/log/clamav/clamav.log in append mode (check permissions!).
...fail!
[Code]...
View 5 Replies
View Related
Dec 10, 2010
what a horrendous piece of software. Ive been at it 3 days trying to do something that ought to be simple and everytime i solve one problem another problem arises. at first I removed the old clamav 9.5 or something. I got the latest ubuntu release btw, and Clamav used to work when i first installed it in the previous ubuntu release. anyway, it asked me to upgrade, so since synaptic doesnt have the latest, i downloaded from sourceforge. I did the whole ./configure gave me errors like need build-essentials-- which i then did, error: need zlib.dv--- I did that one too. Now two more errors that i need to fix so I can compile it.
View 1 Replies
View Related
Feb 8, 2011
I checked on clamav web site but no way to install it yet on Maverick.
View 4 Replies
View Related
May 31, 2011
I am semi new to UBUNTU worked a bit with it in the passed on vps and that. but i am currentaly tring to make a module for *Zpanel* i am making an anti virus module and am going to be using clamav. up to now everything has been going smoothly but i have hit massive problem.
I am tring to do this:
Code:
And i get this in return
Code:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies.
I dont get any install. and the information i have collect from people say that and install should not be stopped becuase of an depend
So as any one who is semi new would do i then tried installing the depend
Code:
And i get this in return
Code:
E: Package 'phpapi-20060613+lfs' has no installation candidate
So it look like problem after problem
Does any one know why i can not install php5-clamavlib
I have UBUNTU 11.04 desktop (with zpanel installed on it)
*zpanel an open source web hosting panel for windows and NOW LINUX (zpanel has just been release on UBUNTU ONLY ).
View 1 Replies
View Related
Sep 16, 2010
I am trying to install proftpd from source with the mod_clamav-0.10. I am using CentOS 5.5. I would love to get proftpd with clamav working. I had it installed previously through yum and uninstalled it before trying to do reinstall it through source.
yum erase proftpd
View 7 Replies
View Related
Sep 7, 2010
when a message gets sent to me I always get this message in my maillog. What does this mean and how can I fix it?
srvspam amavis[2474]: (02474-06) ask_av (ClamAV-clamd) FAILED - unexpected result: /var/amavisd/tmp/amavis-20100907T102651-02474/parts: lstat() failed: Permission denied. ERROR srvspam amavis[2474]: (02474-06) WARN: all primary virus scanners failed, considering backups
View 4 Replies
View Related
Feb 22, 2010
how to disable boot,startup the clamav on rhel/centos.
View 1 Replies
View Related
Sep 14, 2009
Is set up a postfix, dovecot + clamav server as described in the wiki. I also use the freshclam update script in /etc/cron.daily/freshclam. But my problem is i get this error message every day:
/etc/cron.daily/freshclam:
ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log). ERROR: /var/log/clamav/freshclam.log is locked by another process
View 3 Replies
View Related
Jun 21, 2010
I'm having a little trouble with ClamAV. Everytime someone sends me an email I get this error in my Webmin Mail Log. Now the mail works and it goes to the quarantine or to the user mail box but this error fills up my mail log and I'm assuming it is not using ClamAV virus definitions to scan the mail? How would I get rid of this error?
I checked in my /etc/clamd.conf and I have AllowSupplementaryGroups yes. What can be causing this error?
I am using ClamAV 0.96.1
Spamassassin 3.3.12
PostFix 2.3.3
CentOS 5.5
Jun 21 09:57:53 localhost amavis[10714]: (10714-03) ask_av (ClamAV-clamd) FAILED - unexpected result: /var/amavisd/tmp/amavis-20100621T090618-10714/parts:
lstat() failed: Permission denied. ERROR
Jun 21 09:57:53 localhost amavis[10714]: (10714-03) WARN: all primary virus scanners failed, considering backups
Jun 21 09:58:01 localhost amavis[10714]: (10714-03) SPAM, <lovelovedsert12@yahoo.com> -> <acruel@email.com>, Yes, hits=20.638 tag=6 tag2=7 kill=7
tests=DKIM_ADSP_CUSTOM_MED=0.001, DRUGS_ERECTILE=2.221, FORGED_YAHOO_RCVD=1.022, FREEMAIL_ENVFROM_END_DIGIT=2.223, FREEMAIL_FROM=0.001,
FREEMAIL_REPLYTO=2.775, FREEMAIL_REPLYTO_END_DIGIT=0.98, FSL_HELO_NON_FQDN_1=0.001, HELO_NO_DOMAIN=0.001, INVALID_DATE=0.432, MISSING_MID=0.14,
NML_ADSP_CUSTOM_MED=1.2, RCVD_IN_BRBL_LASTEXT=1.644, RCVD_IN_BSRN=2.5, RCVD_IN_RELAYS_ORDB=3, RDNS_NONE=1.274, TVD_RCVD_SINGLE=1.213,
T_TO_NO_BRKTS_FREEMAIL=0.01, quarantine spam-9665 (maia-spam-quarantine)
Jun 21 09:58:01 localhost amavis[10714]: (10714-03) Blocked SPAM, [212.96.9.34] [212.96.9.34] <lovelovedsert12@yahoo.com> -> <acruel@email.com>, Hits: 20.638, 8508ms
View 2 Replies
View Related
Mar 19, 2010
I have a server im trying to use with clamAV to scan it all and with cron job. it worked fine for few days, sending me emails with reports, i was happy. now i get ERR emails and when running manually i get the follwing message output: Script: clamav-cron v. 0.6 - Copyright 2009, Stefano Stagnaro Scanned: /
[Code]...
View 3 Replies
View Related
May 21, 2011
I'm trying to setup a Centos 5.6 Squid Proxy Server with Content Filtering & Antivirus Scanning Incoming HTTP Traffic from the Internet
I then proceeded to setup an configure the Proxy Server, i was able to test and confirm that Squid and Dansguardian Content Filter is working, however i dont know if Clamav is scanning HTTP traffic before it hits the client/server. Is there a way i can check if the Antivirus scanning is working.. is there some log file or real world test i can i can do to confirm that Clamav is scanning incoming traffic or even blocking potential viruses ??
Anyone who has squid proxy server with Clamav configured and its working can share there settings/setup with me and how they tested it ??
View 1 Replies
View Related
Apr 16, 2010
This started happening sometime yesterday afternoon on a server that's been trouble free for years.
My Ubuntu update is scheduled to run every month on the 5th, so this was roughly 10 days after that. So it seems to me it's not update related. The only thing I've done on the server lately is update a spamassassin rule which required an amavis restart. That was done earlier in the week.
I've already reviewed issues at [url] and all the conditions are correct for the more recent How to.
I can also confirm that, in fact, /var/run/clamav/clamd.ctl does not exist.
View 7 Replies
View Related
Sep 23, 2010
I have two servers complaining about ClamAV being outdated:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.96.1 Recommended version: 0.96.3
Doing an aptitude update says I don't have to upgrade anything. Why is this? Must ClamAV be updated manually?
View 7 Replies
View Related
Oct 9, 2010
When i run $ sudo freshclam I get this message ClamAV update process started at Sat Oct 9 12:21:22 2010 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.96 Recommended version: 0.96.3 DON'T PANIC! Read http://www.clamav.net/support/faq main.cvd is up to date (version: 52, sigs: 704727, f-level: 44, builder: sven) daily.cvd is up to date (version: 12114, sigs: 138436, f-level: 53, builder: sven) bytecode.cvd is up to date (version: 80, sigs: 10, f-level: 53, builder: edwin) Since I am a beginner i don't know how to upgrade freshclam as $ sudo apt-get upgrade doesn't work. Guessing I may have to download the package and install manually just thought I'd ask before doing that.
View 4 Replies
View Related
Oct 31, 2009
I have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
View 14 Replies
View Related
Dec 26, 2010
I am trying to set up a Mail Server -- Virtual Users with Postfix, PostfixAdmin, Courier, Mailscanner, ClamAV On CentOS 5.5 using this guide. These are the version and softwares I have used till now:-
[Code]....
View 4 Replies
View Related
Jun 1, 2009
I am trying to install libg++2.7.0 package in FedoraCore 6 on a DELL machine that has Intel Pentium D processor.I get an error saying "unrecognized host system name i686 unknown linuxoldld"
View 1 Replies
View Related
May 26, 2010
for any reason after installation system hangs up and nothing happens, i�m newbie about linux, maybe the problem is the RAID 1 configuration of the disks. The machine is a R710 Server:
2 x Xeon E5520
4 x 2 GB Memory
4 X 750 GB SATA 7200 3.5" disk
PERC 6/i Raid controller
View 9 Replies
View Related
Feb 25, 2009
I'm new on Dell PowerEdge 2900. I dont know how to install centOS 5.2 on it. whice OS type that I should select. at first I select RH enterprise 5 and it format HDD. already and I put centOS 5.2 in, but it was deny and eject that cd. when I power off it shown that
"root(hd0,1)filesystem type is ext2f2,partition type0x83
kernel/linux/vmlinz%(ksLocations)
Error is : file not found
press any key to continue"
View 5 Replies
View Related
Aug 31, 2010
I'm a basic ubuntu user, and I enjoy it. I want to install ubuntu and use it for gaming on an old computer. I have been told that wine doesn't do great with games, but then a friend of mine showed me that with a good processor and gfx card and RAM, it will do. So here's the thing: this computer i want to work with, its a dell dimension l500r bought in 2000 and came with win98. my parents don't even care about it any more, and they gave me full permission to kill it if I want.
so, I decided to upgrade it. I know I will need to upgrade RAM, Hard drive, GFX, and processor. Anyone know the specs on this computer, and do you have any other suggestions in terms of parts? (for example, it has a small fan that I'm pretty sure is the heat sink for the processor. Should I add a fan?). I will NOT install windows if I have to. I'm not paying money for an OS that costs more than I can afford to maintain. EDIT: forgot to mention that I have figured out the specs on my RAM and have a USB external hard drive I can attach later. big things are specs for GFX card and processor.
View 6 Replies
View Related
Nov 2, 2010
I purchased a USB from [URL] for the upgrade of the title. There are no instructions so I need to know how to do this upgrade. I have looked at the files on the USB and it is not clear how to proceed.
View 5 Replies
View Related
Mar 24, 2011
I am currently running Ubuntu9.04 (Jaunty) on a Dell Vostro v13, pre-installed when I got it. I would like to upgrade to the 10.04 LTS but when I try, all goes fairly well until I get to the screen where it wants to set up my keyboard (Step 3). Then comp freezes and I have no use of touch-pad or keyboard, have to just shut off computer and re-install to factory settings to use it again. I have upgraded with USB and through update manager. Neither works. No clean instal from a CD because I don't have a CD drive... I have read in a couple places the inability to use keyboard/touch pad might have to do with the incorrect driver on the VostroV13.
View 2 Replies
View Related
Jul 8, 2009
I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world
View 1 Replies
View Related
Jul 4, 2009
I've tried to upgrade with prepupgrade and also to boot from F11 DVD, but just after anaconda starts, it hangs. (Just about when X starts) Maybe my hardware isn't supported yet or something but I can't find out. I don't find any anaconda log-file or anything to give me a clue what goes wrong.
description: Desktop Computer
product: Dimension E521
vendor: Dell Inc
serial: 709KZ2J
[code].....
View 2 Replies
View Related
Sep 2, 2010
I have been using UBUNTU 8.04 with my Dell Mini Inspiron. How can I upgrade it ? If I upgrade is there problem after upgrade ?
View 5 Replies
View Related
Jun 8, 2009
I have a dell inspiron 530 desktop with core 2 quad and 4GB memory, running 32bit vista and 64 bit fedora 10. I searched on the web with "can I install 8GB memory on dell inspiron 530", and got couple of articles that says I only needed a bios upgrade.I downloaded bios version 1.0.18 from dell and run that in Windows to replace bios 1.0.12.After it said upgrade successful and asked me whether I wanted to reboot to have the new bios taking effect, and I said yes. And it shutdown the computer, and never came up Now, when power up, I see nothing, not even the "F2 to setup, F12 to boot menu" message, much less the grub selection. Is there a way to revive the computer?
View 4 Replies
View Related
