After I did a safe-upgrade on my lenny system, clamav is now broken, which is quite a pain since my e-mail flow is now failing.
I get this in the log. CLAMAV: couldn't connect to: /var/run/clamav/clamd.ctl:
I have volatile in the list, and clamav is also installed from volatiel of what I can see, so what went wrong? Is the package broken?
[Code].....
I upgraded my server yesterday via apt-get and my Perl scripts are not able to make HTTPS connections due to certificate verification problems.
This seems to be a problem for EVERY HTTPS site.
CURL gives the following error:
Code: Select allSSL certificate problem: unable to get local issuer certificate
I know that this has something to do with root certificate updates, but if I sound ignorant about it, it's because I am.
using CURL with the -k option allows the connection to be made.
I'm running OpenSSl 1.0.1k-3+deb8u2 on Jessie 8.2.
I would obviously prefer to not disable certificate verification on my server.
My probles consists in that i have no idea on how update the clamav. I downloaded it throu center of software. Butt when i try to upgrade it from the gui the upgrading bar reaches only 15% and desapears. I tried do type freshclam from root command line but it just writes that there is not such command. May be i use incorrectly the command line.
View 4 Replies View RelatedI'm trying to install the latest version of Clamav (0.95.3), but I'm getting the following error messages in Synaptic after adding the recommended repository to my sources:
Here's a listing of my sources:
Yesterday I installed some updates on my Jessie system (I don't remember if the kernel was also updated). After rebooting the system nothing happens after the "Loading intial ramdisk"-message. If I boot in recovery mode the boot stops at the message:
Code: Select allfb: switching to nouveaufb from simple
If I add "nouveau.modeset=0" temporary to the GRUB-entry for the recovery mode, it will boot up in the console-mode.
I was able to get an ethernet connection with "dhclient eth0" and removed the "xserver-xorg-video-nouveau" package. Then I installed it and the removed gnome-desktop again. Before removing it, aptitude said the following to the package:
Code: Select alli A xserver-xorg-video-nouveau
Now it only says:
Code: Select alli xserver-xorg-video-nouveau
But this didn't change my problem. I found a similar case in the internet, but there were no solutions for it: [URL] ....
The next thing I would do, is to install the proprietary nvidia-drivers, but since I have a GTX 960 video card, I would have to use experimental drivers. So I'm afraid to make it more worse trying to install this drivers.
Also I'm not sure if it really is a driver-specific of kernel-specific problem. My kernel is version 3.16.0-4-amd64.
For anyone using Blueman with Testing (Squeeze), todays Python upgrade to version 2.6 stops it from working due to a Blueman bug. This has been fixed in blueman version 1.21-4, which you can install from SID if you don't want to wait the 10 days for the normal migration.
View 1 Replies View RelatedOn my system nearly all subfolders of my home-directory are on another hard drive. I included them via /etc/fstab as shown in the example below:
UUID=12c12565-ece4-4a22-b5c5-275aba1a3fd4 /media/data ext4 defaults 0 2
/media/data/archive /home/XXX/archive none bind 0 0
etc.
I was using Synaptic to remove unwanted sound & audio programs...it seemed to take out other files that were non-related ?
(1) Now apt-get complains about a "Held Package" and doesn't tell me the pkg name.
(2) Synaptic is broken...error..E: The value 'stable-updates' is invalid for APT::Default-Release as such a release is not available in the sources
E: _cache->open() failed, please report.
stable-updates isn't even in my sources list. I've purged synaptic, and re-installed but remains broken. When you close error msg synaptic disappears ? Therefore can't use synaptic at all.
(3) apt-get says many packages that were available are no longer available...like one of the main repos has disappeared ?
(4) I put the same repos that are working for my brother who is running Debian Jessie also, but didn't improve the number of missing available packages.
deb [URL] ....
deb [URL] ....
How or why things have gone so wrong from just removing unwanted sound pkgs.
To recap problems...apt-get held pkg....broken synaptic....unavailable pkgs.
I'm restoring an old TI Silent 700 terminal [URL] ... and have connected it to an RPi running the debian based Jessie release using a serial converter. After learning more than I wanted to about serial settings and support I now have it interfaced and communicating bidirectionally but have one last hurdle - proper support for a single case (uppercase only) terminal in agetty.
With the -U flag on it seems like the the login name is detected as needing conversion because lowercase login names work - but lower case passwords do not and once I get a bash prompt all input comes in as upper case. So the -U agetty flag only seems to apply to login name and is then forgotten (not passed on to login process or bash?) and various settings in stty like iuclc, xcase, iexten don't seem to work.
I'd really like to get this terminal working with native support but I'll also take a kludge of some kind (I've tried a tr pipe for example).
Here is what I think is the relevant portion of my systemd generator:
Code: Select all[Service]
ExecStart=-/sbin/agetty -U 300 %I $TERM
Type=idle
Restart=always
UtmpIdentifier=%I
TTYPath=/dev/%I
[Code] .....
Alright, I edited "/etc/default/isc-dhcp-server" and set "eth0" as the only thing listed for interfaces. I also have the code below in "/etc/dhcp/dhcp3/dhcpd.conf" and I even copied it to "/etc/dhcp/dhcpd.conf" for good measure, and I can't get the DHCP server to start. As an intermediate to advanced user, I am under the high assumption that it is broken since everything in the docs has been set. I have googled for two days and cannot find a fix, so before I report it as a broken package, would somebody with more experience with the package chime in?
Configuration file:
subnet 10.0.0.0 netmask 255.255.255.0 {
option domain-name-servers 10.0.0.254;
option broadcast-address 10.0.0.255;
[Code].....
I hid my wireless setup because it contains my WiFi network info including key. This box is routing, doing DNS resolution, and firewalling just fine. I just cannot get the friggin' DHCP server to start no matter what I try.
Oh, and is it safe to delete "/etc/dhcp" or "/etc/dhcp3"? They appear to be duplicates of each other...
I want to remove a keyring package I installed from a repository that I no longer want to use. However, I cannot remove it:
# apt-get remove -y --force-yes debian-xray-keyring
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be removed:
debian-xray-keyring
0 upgraded, 0 newly installed, 1 to remove and 130 not upgraded.
After this operation, 49.2 kB disk space will be freed.
(Reading database ... 181076 files and directories currently installed.)
Removing debian-xray-keyring ...
gpg: key "AB8F901D" not found: eof
gpg: AB8F901D: delete key failed: eof
dpkg: error processing debian-xray-keyring (--remove):
subprocess installed pre-removal script returned error exit status 2
configured to not write apport reports
Errors were encountered while processing:
debian-xray-keyring
E: Sub-process /usr/bin/dpkg returned an error code (1)
Having installed the 2.6.32 backport for Lenny, I have suddenly noticed that my Gkrellm doesn't display CPU and MB temperature anymore. Also, the smart sensors are inaccessible. Smartctl cannot access the readings even when run manually in a root terminal. I tried reinstalling lm-sensors and running sensor-detect again but it didn't help. What else needs to be updated to let the backported kernel see the hardware sensors?
View 4 Replies View RelatedMy chrome browser has been broken since the last upgrade. I did (just a regular "apt-get upgrade").
I get this when I try to run the browser from a console :
Code: Select alldarko@paris:~$ google-chrome
[3229:3229:0918/103229:ERROR:nss_util.cc(845)] After loading Root Certs, loaded==false: NSS error code: -8018
[3229:3229:0918/103259:ERROR:zygote_host_impl_linux.cc(541)] Failed to send GetTerminationStatus message to zygote
[3229:3229:0918/103259:ERROR:zygote_host_impl_linux.cc(541)] Failed to send GetTerminationStatus message to zygote
So to be more specific :
My system is :
Code: Select alldarko@paris:~$ uname -a ; cat /etc/debian_version ; cat /etc/issue
Linux paris 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) i686 GNU/Linux
8.2
Debian GNU/Linux 8
l
I run the Xfce desktop
The problem is the same whether is use google-chrome stable, beta, unstable, or chromium
I've been upgrading a bunch of our servers from sarge to etch and then to lenny, on two of these servers, cron has broken, cronjobs will not run. On another two (that have no significant differences from the others) cron is unaffected I created a simple job to run while I was testing
*/1 * * * * root /usr/local/mailtest-1 in the script is echo test mail from busted server | mail -s "test mail from your busted server" [URL]. and that runs fine if I run it manually, I've added it into /etc/crontab and crontab -e but haven't got a single mail from it. The cron service is running
I tried apt-get remove --purge and then a re-install but it doesn't seem to have worked. All the logs have stopped rotating as well so I'm starting to think that maybe it's not a fault with cron but with some other service that it depends on. However, I've not been able to figure out what that might be.
I got a rather big problem since an attempt to upgrade.My debian version is 8.0.I upgraded when apt proposed the change. I did that in two steps, with apt-get upgrade and then apt-get dist-upgrade, with the installation of a new kernel. I moved from 3.2.0-4-686-pae to 3.16.0-4-686-pae.Since the upgrade, I can't boot my system any longer.During the boot sequence, this message appears with a countdown (it's copied by hand) :
Code: Select all(1 of 4) a start job is running for dev-disk-byX2du
At the end of the countdown, the boot sequence starts again, and ends up on an invite to log in as root in rescue mode. I can't connect (maybe due to some azerty/qwerty issue, I got a French keyboard. I tried to type in "qwerty mode", with no success (the password is not prompted)).I can connect with the 3.2 kernel however, selecting it form the grub interface. I can't log in in rescue mode either, but with this kernel the boot sequence goes on and I can log as a regular user or as root, at the end of the boot sequence. There is no X, but the system seems to work.What could I do to make the system boot properly with the new kernel, or to go back to the 3.2 version ?
I've changed my /etc/apt/sources.lst file to use "jessie" repositories instead of "wheezy". I then ran synaptic and updated everything (there were loads of packages, something like 2000 to update).
After this I rebooted. The grub menu shows as usual with the background image I'd set and the operating systems as usual (including Windows 7) however there is no longer a 5 second countdown and when I select *any* menu option, it asks for a username and password.
I don't know what username and password it's asking for as I never used to have one set!!! I did have a username and password set up so that if you wanted to edit a grub menu option so I tried that but to no avail.
I'm using MBR/BIOS not EFI.
I am trying to upgrade my clam AV to latest 0.9.6.1. Last times I just uploaded to the server and used RPM command and it was installing. Now I cant find RPM for this ver. So I guess I need to prepare one.
I used the guide here:
Packaging software with RPM, Part 1: Building and distributing packages
by IBM
Changing all wget -> clamav
But when run this I got:
# rpmbuild -v -bb --clean clamav.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.74542
+ umask 022
+ cd /home/myclamav/BUILD
+ cd /home/myclamav/BUILD
+ rm -rf clamav-0.96.1
+ /bin/gzip -dc /home/myclamav/SOURCES/clamav-0.96.1.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd clamav-0.96.1
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ $'
'
: command not found542: line 35:
error: Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
Is there a better way to create RPMs? or Where do I get RPM for this version? I couldn't find it through their site.
I'm trying to upgrade a headless terminal server like box from Etch to Lenny. Users log in to this box using a GoGlobal client and use applications such as OpenOffice and Iceweasel. Because of the ended support for Etch we want to upgrade this machine to Debian Lenny as soon as possible and in order to save time we decided to dist-upgrade instead of installing a new machine. I've done this upgrade in a test environment and everything is working as expected except for OpenOffice, which seems broken after the upgrade:
The problem seems to be caused by the anti aliasing features of OpenOffice and disabling these features in the options panel (Extra -> Options -> OpenOffice.org View -> Screen font anti aliasing) fixes the UI somewhat:
However, as can be seen in the last screenshot, disabling anti aliasing makes the whole thing look terrible. I've searches the net for solutions such as this one but so far I've not been able to fix this. Is there anyone who can point me towards what has changed in the way fonts are rendered since Lenny and what might cause this breakage for OpenOffice? Other applications such as Iceweasel work perfectly and look better then before.
Code:
* Starting ClamAV daemon clamd
WARNING: Ignoring deprecated option MailFollowURLs at line 33
ERROR: Can't initialize the internal logger
ERROR: Can't open /var/log/clamav/clamav.log in append mode (check permissions!).
...fail!
[Code]...
what a horrendous piece of software. Ive been at it 3 days trying to do something that ought to be simple and everytime i solve one problem another problem arises. at first I removed the old clamav 9.5 or something. I got the latest ubuntu release btw, and Clamav used to work when i first installed it in the previous ubuntu release. anyway, it asked me to upgrade, so since synaptic doesnt have the latest, i downloaded from sourceforge. I did the whole ./configure gave me errors like need build-essentials-- which i then did, error: need zlib.dv--- I did that one too. Now two more errors that i need to fix so I can compile it.
View 1 Replies View RelatedI checked on clamav web site but no way to install it yet on Maverick.
View 4 Replies View RelatedI am running Zimbra 5.0.2 with ClamAV and I need to upgrade clam anti virus. It's for a Centos 5.4, Dell PE 2950 machine. On their Wiki for upgrades at [URL]. They recommended either of the Red hat versions - Redhat 5.x 32-bit or the Redhat 5.x 64-bit. Are there any known problems using either of these two versions on my Centos machine? Also, want to make sure, I am assuming I need the 32 bit version, is this correct? I am asking because in the past I have learned sometimes it's better to not go with the RH versions on Centos, can't remember where I heard that, so I want to make sure before I do the install.
View 4 Replies View RelatedI've had previous versions of Clam running and have kept the system uptodate with regular yum updates.
this recently upgraded ClamAV and this will not now start. code...
From googling all i seem to find that it's a make error, but this is a binary install!
I've removed and reinstalled also.
Unpacking replacement ffmpeg ... dpkg: error processing /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb (--unpack): trying to overwrite '/usr/share/ffmpeg/libx264-ipod640.ffpreset', which is also in package libavcodec52 4:0.5.1-3 dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/ffmpeg_5%3a0.5.1+svn20100411-0.0_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
View 9 Replies View RelatedI am semi new to UBUNTU worked a bit with it in the passed on vps and that. but i am currentaly tring to make a module for *Zpanel* i am making an anti virus module and am going to be using clamav. up to now everything has been going smoothly but i have hit massive problem.
I am tring to do this:
Code:
And i get this in return
Code:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies.
I dont get any install. and the information i have collect from people say that and install should not be stopped becuase of an depend
So as any one who is semi new would do i then tried installing the depend
Code:
And i get this in return
Code:
E: Package 'phpapi-20060613+lfs' has no installation candidate
So it look like problem after problem
Does any one know why i can not install php5-clamavlib
I have UBUNTU 11.04 desktop (with zpanel installed on it)
*zpanel an open source web hosting panel for windows and NOW LINUX (zpanel has just been release on UBUNTU ONLY ).
I have a MyBookLive where i installed a Debian 2.6 kernel. The system is running fine so far. Because of an error message when apt-get upgrade (udev) i tried to upgrade to 3.16. Here's what i did:
- apt-get install linux-image-xx
- apt-get install linux-source-xx
- extract the source
- copied the old .config from running 2.6 kernel over to the 3.16 directory
- make oldconfig
- make uImage
- make modules
- make modules_install
- copied uImage to /boot
No error messages because its a headless device - its just not booting up.
i'm running debian lenny - latest stable i have recently installed smartcam (mobile phone as webcam over bluetooth) from .deb package , get errors of unmet dependency , but application works like a charm, unfortunately broken dependences block my aptitude , i cant fix them either as latest stable use older versions of dependences even in backports... how do i mark smartcam package as not broken and release my apt?
View 8 Replies View RelatedI have a system that was upgraded from Debian 7 to 8. Unfortunately it is not able to boot from the new kernel 3.16. Only the old 3.2 kernel is able to boot. I could transfer a backup, install it in Virtualbox, redo the upgrade and I can reproduce the error..The last error before "panic" is this line
Code: Select all 59.073579] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
Loading, please wait...
[ 59.226154] systemd-udevd[53]: starting version 215
[ 59.326564] random: systemd-udevd urandom read with 4 bits of entropy available
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... /init: .: line 210: can't open '/scripts/init-premount/ORDER'
[ 59.552148] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200
The directory is indeed empty. I have reinstalled
Code: Select allapt-get install -reinstall initramfs-tools
and rerun initramfs
Code: Select allupdate-initramfs -c -u
I am running Debian on an ARM module (BananaPi).5 minutes ago, i started upgrading the system, but fortunately the power cable moved and the system closed.Now i open it up again and i'm trying to re-upgrade the system but i'm always getting this message
# apt-get upgrade
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.
1) old a1300 laptop: P3 800, 256 MiB RAM, HDD, PC-CARD NIC. from lspci: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) with debian (i386), previously lenny, now squeeze. running as server.
[Code]...
Smaller files seem to transfer faster, but I have no idea why. I've checked with ethtool that both NICs are running at 1000Mb/s, and both are connected to the same Gigabit switch. The HDD in the laptop had previously provided (nfs) transfer speeds of 12-13 MiB/s. The options in fstab on the client are what I've changed them to since, while trying to fix the problem. Can't remember exactly what they were, but rsize, wsize and nfsvers are some I put there trying to fix it.
I had considered buying a new, faster HDD for the laptop, but that is certainly out of the question until this is resolved. Edit: Is this the right place to ask about this? I did wonder if the 'General Questions' category was a better fit.
