Code:
* Starting ClamAV daemon clamd
WARNING: Ignoring deprecated option MailFollowURLs at line 33
ERROR: Can't initialize the internal logger
ERROR: Can't open /var/log/clamav/clamav.log in append mode (check permissions!).
...fail!
[Code]...
I'm replacing my trusty old F5 firewall/mail server with a new(er) F11 box. Using yum, I have these packages installed:
[Code].....
I have two servers complaining about ClamAV being outdated:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.96.1 Recommended version: 0.96.3
Doing an aptitude update says I don't have to upgrade anything. Why is this? Must ClamAV be updated manually?
I am trying to upgrade my clam AV to latest 0.9.6.1. Last times I just uploaded to the server and used RPM command and it was installing. Now I cant find RPM for this ver. So I guess I need to prepare one.
I used the guide here:
Packaging software with RPM, Part 1: Building and distributing packages
by IBM
Changing all wget -> clamav
But when run this I got:
# rpmbuild -v -bb --clean clamav.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.74542
+ umask 022
+ cd /home/myclamav/BUILD
+ cd /home/myclamav/BUILD
+ rm -rf clamav-0.96.1
+ /bin/gzip -dc /home/myclamav/SOURCES/clamav-0.96.1.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd clamav-0.96.1
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ $'
'
: command not found542: line 35:
error: Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.74542 (%prep)
Is there a better way to create RPMs? or Where do I get RPM for this version? I couldn't find it through their site.
what a horrendous piece of software. Ive been at it 3 days trying to do something that ought to be simple and everytime i solve one problem another problem arises. at first I removed the old clamav 9.5 or something. I got the latest ubuntu release btw, and Clamav used to work when i first installed it in the previous ubuntu release. anyway, it asked me to upgrade, so since synaptic doesnt have the latest, i downloaded from sourceforge. I did the whole ./configure gave me errors like need build-essentials-- which i then did, error: need zlib.dv--- I did that one too. Now two more errors that i need to fix so I can compile it.
View 1 Replies View RelatedI checked on clamav web site but no way to install it yet on Maverick.
View 4 Replies View RelatedI am semi new to UBUNTU worked a bit with it in the passed on vps and that. but i am currentaly tring to make a module for *Zpanel* i am making an anti virus module and am going to be using clamav. up to now everything has been going smoothly but i have hit massive problem.
I am tring to do this:
Code:
And i get this in return
Code:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies.
I dont get any install. and the information i have collect from people say that and install should not be stopped becuase of an depend
So as any one who is semi new would do i then tried installing the depend
Code:
And i get this in return
Code:
E: Package 'phpapi-20060613+lfs' has no installation candidate
So it look like problem after problem
Does any one know why i can not install php5-clamavlib
I have UBUNTU 11.04 desktop (with zpanel installed on it)
*zpanel an open source web hosting panel for windows and NOW LINUX (zpanel has just been release on UBUNTU ONLY ).
After I did a safe-upgrade on my lenny system, clamav is now broken, which is quite a pain since my e-mail flow is now failing.
I get this in the log. CLAMAV: couldn't connect to: /var/run/clamav/clamd.ctl:
I have volatile in the list, and clamav is also installed from volatiel of what I can see, so what went wrong? Is the package broken?
[Code].....
I am running Zimbra 5.0.2 with ClamAV and I need to upgrade clam anti virus. It's for a Centos 5.4, Dell PE 2950 machine. On their Wiki for upgrades at [URL]. They recommended either of the Red hat versions - Redhat 5.x 32-bit or the Redhat 5.x 64-bit. Are there any known problems using either of these two versions on my Centos machine? Also, want to make sure, I am assuming I need the 32 bit version, is this correct? I am asking because in the past I have learned sometimes it's better to not go with the RH versions on Centos, can't remember where I heard that, so I want to make sure before I do the install.
View 4 Replies View RelatedI've had previous versions of Clam running and have kept the system uptodate with regular yum updates.
this recently upgraded ClamAV and this will not now start. code...
From googling all i seem to find that it's a make error, but this is a binary install!
I've removed and reinstalled also.
I upgrade one of my servers from 8.04 to 9.04 and now libvirt is not working anymore.
The funny part is that the virtual machines are working perfectly because I can access them via ssh/ftp/etc.
I just can't access the libvirt interface. For example, if I issued (as root):
virsh -c qemu://system
I halts with Connecting to uri: qemu:///system error: failed to connect to the hypervisor
Is there a trace/debug that I can verify ?
I have a server that started out at 8.04 LTS was upgraded to 8.10 and to 9.04. When I upgraded to 9.04 sudo and ssh stopped working.
Fortunately I have a root account and can login as root or su to root.
I suspect this is the result of changes I made to nsswitch.conf and pam.conf to get winbind working.
I was hoping for a fix by upgrading to 9.10, but that didn't work. I want to upgrade to 10.04 LTS, and stay there but I think need to resolve this first.
auth.log reports failed password for ssh attempts and authentication failed for sudo. I am at a loss to determine where the problem is and how to track it down.
I had a working server 9.04 on my network and I could access shares via Samba and MacFusion from Windows, ubutu and mac boxes. After the upgrade I can not access shares via Samba, I can ssh in it just fine (no change there) also Macfusion mounts the paths just fine.
Anybody had this problem with the upgrade? It must be samba everything else is working (also I can't access any files from my Ubuntu Laptop running 10.10 Desktop edition)
Here is my smb.conf file:
[global]
workgroup = WORKGROUP
server string = %h server (Samba, Ubuntu)
wins support = yes
; wins server = w.x.y.z
dns proxy = no
[Code]...
I had sybase server running on my desktop but after the upgrade it does not seam to start properly. tried to restart the server many times but does not seam to help
The logs are displaying as below
00:00000:00001:2010/11/19 13:53:08.21 server Recovery complete.
00:00000:00010:2010/11/19 13:53:08.26 kernel Initializing Job Scheduler Task
00:00000:00010:2010/11/19 13:53:08.39 kernel Installed Job Scheduler sequencer code version 0.27 - 27 tokens
[Code]....
I have installed my first Ubuntu server today. It is connected to our corporate network. On this network there is a Windows 2008 R2 server that serves as DNS Exchange and file server. For some unknown reason this Windows server looses network connection when the ubuntu server comes online. After some investigation the network connection is instantly restored when I stop the clamav-freshclam service on the ubuntu server. When I start the service the network connection of the Windows server goes down.The only "link" with the Windows service and the Ubuntu server is that the Windows server is configure as the nameserver on the ubuntu server.
I want to run this in production because the ubuntu will serve as anti-spam server. I need to understand what is happing and why to prevent this.
Any changes in the way httpd.conf works in 9.04Yesterday I updated from 8.04 to 8.10 and then to 9.04. All works fine, except for Apache Virtual sites.I had several defined in my httpd.conf file, which I used for testing clients' websites.ince the upgrade the virtual sites are not recognised, and all access is done at the original level /var/wwwAny changes in the way httpd.conf works? checked the Apache docs, but found nothing.Here's the httpd.conf I've been using:
<Directory /var/www/clientname/htdocs/products>
AllowOverride All
</Directory>
[code]....
I am trying to install proftpd from source with the mod_clamav-0.10. I am using CentOS 5.5. I would love to get proftpd with clamav working. I had it installed previously through yum and uninstalled it before trying to do reinstall it through source.
yum erase proftpd
I am currently running Ubuntu Server 9.10 and followed this HOWTO on setting up my email server.
[url]
Everything seems to work correctly. If I look in the Maildir the emails I send to test are there.
The problem is when I try to sync my email via IMAP from my windows box (on a different network) it doesn't show any of my email nor does it deliver new email. My email app doesn't give any errors nor does the logs on the server.
How can I get it so my email syncs to windows computer? I am sure it is something really small that I am over looking but I can't seem to find it anywhere. I don't know if you need to see any of my config files but I can post them if needed.
I have a server im trying to use with clamAV to scan it all and with cron job. it worked fine for few days, sending me emails with reports, i was happy. now i get ERR emails and when running manually i get the follwing message output: Script: clamav-cron v. 0.6 - Copyright 2009, Stefano Stagnaro Scanned: /
[Code]...
This started happening sometime yesterday afternoon on a server that's been trouble free for years.
My Ubuntu update is scheduled to run every month on the 5th, so this was roughly 10 days after that. So it seems to me it's not update related. The only thing I've done on the server lately is update a spamassassin rule which required an amavis restart. That was done earlier in the week.
I've already reviewed issues at [url] and all the conditions are correct for the more recent How to.
I can also confirm that, in fact, /var/run/clamav/clamd.ctl does not exist.
When i run $ sudo freshclam I get this message ClamAV update process started at Sat Oct 9 12:21:22 2010 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.96 Recommended version: 0.96.3 DON'T PANIC! Read http://www.clamav.net/support/faq main.cvd is up to date (version: 52, sigs: 704727, f-level: 44, builder: sven) daily.cvd is up to date (version: 12114, sigs: 138436, f-level: 53, builder: sven) bytecode.cvd is up to date (version: 80, sigs: 10, f-level: 53, builder: edwin) Since I am a beginner i don't know how to upgrade freshclam as $ sudo apt-get upgrade doesn't work. Guessing I may have to download the package and install manually just thought I'd ask before doing that.
View 4 Replies View RelatedI just installed the lamp stack and so far my default site is working. But a 2nd site I made is not working.I created the config file in /etc/apache2/sites-availableit reads:Quote:
<VirtualHost myip:80>
ServerAdmin webmaster@mydomain.com
ServerName mydomain.com
[code]....
I have very interesting problem after ~10 PHP Fatal error, php 5(latest one) in apache2(latest one) in Ubuntu Server 10.10(with latest updates) just do not work. So if try any php page it's not working(user see white page), but HTML still work fine.What that can be? So only restart apache is help to back php. (we are running Wordpress blog 3.1)
View 2 Replies View RelatedI had a problem with apache2 and getting .htaccess working. I have done some things and i believe its working the ErrorDocument command is anyway. I believe there may be some problems with the rewrites though.Im trying to take a urlhttp://localhost/showthread/123and make it display whats on http://localhost/index.php?showthread=123The rewrite rule is Quote:
Options +FollowSymLinks
RewriteEngine on
RewriteRule ^showthread/([^/.]+)/?$ index.php?showthread=$1 [L]
[code]....
I upgraded Samba to 3.5.2 to enable Windows 7 to log in to the PDC. ACL was working with the Samba 3.0.28a that came with 8.04LTS. After upgrade I can now log in to the domain with Win 7 but ACL permissions are not working on Win7, XP or anything. They still show on the server but any attempt to change permissions on the workstation fails with "Access is Denied" and only user/group/other permissions are doing anything. Anyone know what changes for the ACL were made between the two versions? I know they're working on switching to VFS modules but setting "vfs objects = acl_xattr"
View 1 Replies View RelatedI've Xubuntu and I'm looking for a Clamav Gui for XFCE.
View 1 Replies View RelatedI have a production mdadm RAID1 v.8.04 Ubuntu Server and would like to upgrade to a PAE enabled kernel of 8.04 Server. I have 4GB RAM and would like to extend to 6GB RAM in the near future. I remember reading about a simple method of upgrading the kernel, but cannot find much info on the net. Has anyone upgraded and what performance gains were found with the PAE enabled system?
View 3 Replies View RelatedAfter upgrade to Ubuntu Server 10.04 LTS, ufw has started blocking some legitimate HTTP and FTP contacts. What can I do to tell ufw not to block any HTTP and FTP requests.This is what is shown in messages:
Code:
May 3 11:07:48 server kernel: [] [UFW BLOCK] IN=eth0 OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:00:00 SRC=192.168.1.100 DST=192.168.1.50 LEN=60 TOS=0x00 PREC=0x00 TTL=121 ID=9979 DF PROTO=TCP SPT=60191 DPT=80 WINDOW=16560 RES=0x00 ACK URGP=0
UFW has these settings:
[Code]...
some time ago I've installed Ubuntu LTS 10.4.1 on my linux server because I tought that the long-term-support version was the server version... then, I realized that there was also an Ubuntu Server edition... so, is it possible to upgrade my current installation to 10.10 Server edition? what should I do?
View 9 Replies View RelatedUsing clamav and its finding like 20 virus however, its not quarantining them because of permissions. Help part of kde is missing and I cant find it in synaptic package manager. I would like to find a solution with how permissions can be sanctioned for kde.
View 2 Replies View Related
