CentOS 5 Hardware :: USB-Bluetooth Adapter - Connection Failed / Why Is So?
Aug 19, 2010
I have USB-Bluetooth adapter and Centos 5.5, i plugged in adapter to USB, reboot. then i get this with /sbin/lsusb code...
also, when im searching for devices with phone, i can find my computer (my Bluetooth adapter), but when i press to connect from phone, it says Connection Failed...
thats kind of weird, because overall process seems to be set up ok, and i can find my PC without problems... any ideas why would connection fail then?
View 2 Replies
ADVERTISEMENT
Aug 1, 2010
I've an Acer Aspire One A110 Netbook running Linpus Lite. All seems relatively well however I've plugged in a Bluetooth USB dongle and nothing has happened - oh well, I didn;t expect it to. Of course I'm used to MS Windows OS plug 'n Play and I know this isn't generally how Linpus Lite OS operates but despite looking around I can't find an explanation on how to activate the Bluetooth adapter. There are instructions and demos on how to add a Bluetooth component to the board but I'm not an engineer, neither professional nor hobbyist, so Im not interested in doing that. I've downloaded the Bluetooth zip file from the Acer Spire One support site it has been installed on the Netbook but there still appears to be no Bluetooth connection.
View 8 Replies
View Related
May 25, 2011
I have a bluetooth adapter, but the operating system (CentOS 5.5) doesn't seem to recognize it.
[claudiu@localhost lib]$ /sbin/lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
[claudiu@localhost lib]$ uname -a
Linux localhost.localdomain 2.6.18-194.el5 #1 SMP Fri Apr 2 14:58:14 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
View 3 Replies
View Related
Aug 3, 2009
I spend all day, trying to make bluetooth working with my phone Nokia 2600. First, i try'it with bluez-utils 3.7, and later with 3.9, but i no luck. So, what i have. I use hcitool to scan for my device, and find'it. Next, i connect to my phone with success. Then i try pairing with my phone, using "auth", but here i got error: HCI authentication request failed: Input/output error
View 1 Replies
View Related
Apr 19, 2011
I am trying to get my bluetooth adapter to work in RHEL. The adapter is a Kensington Micro (K33902US). The system detects the device, but it fails to find any networks when I do a scan using hcitool. Also, I wrote a small C program to do the same, with the same results (no network found). The bluetooth manager appears in the panel, but when I right-click, the only option I have is to check/uncheck "Discoverable". I have tried restarting bluetooth using "service bluetooth restart" to no avail.I tried borrowing an adapter from a friend (some DLINK) that seemed to work fine for both hcitool and my program. The problem just seems to be in Red Hat's ability to use this particular device.
View 1 Replies
View Related
Jul 30, 2010
I have set up a mail server and SASL and have it all working. I can send and receive mail though squirrel mail, receive from outlook, but cannot send from outlook. I am using this guide [URL]. I was even able to authenticate perfectly fine like they do be telneting to the server from root as they did. (Step 5). Now a little later in that step when they hook it up to outlook express is the problem. That doesn't work for me.
I get this error in outlook
The connection to the server has failed.
Subject 'test'
Server: 'mail.myserver.com'
Windows Live Mail Error ID: 0x800CCC0E
Protocol: SMTP
Port: 25
Secure(SSL): No
Socket Error: 10060
View 3 Replies
View Related
Feb 24, 2011
I am a new user of ubuntu. I seem to have problem connecting to bluetooth. There is a message saying there are no bluetooth adapter. How do I turn on the adapter now that I've switched from windows 7 to ubuntu. My bluetooth was working fine in windows.
View 7 Replies
View Related
Oct 13, 2010
I am looking for advice and recommendations for USB Bluetooth Adapters. My primary use will be using a Wii controller/remote with XBMC (compiled with 'cwiid' support).Secondary use is general data transfer; other peripherals keyboard/mouse etc.But more than anything I would like to buy a product from a manufacturer who has open support for GNU/Linux and to stay away from others who don't (BlueSoleil software, WinBond - and others).
View 1 Replies
View Related
Apr 26, 2011
i have dell inspiron n4010 having widdcomm bluetooth device and i am using fedora 14. it shows bluez-daemon not working when i start kbluetooth and it shows bluetooth adapter not detected.
View 6 Replies
View Related
Jan 7, 2010
I have a Dell Vostro 200 running Ubuntu 9.10 (Karmic). I want to add Bluetooth capability to my machine. Can anyone recommend an USB Bluetooth adapter that is known to work with Ubuntu 9.10? Perhaps specifically Vostro 200, but I know chances of that might be small.
View 7 Replies
View Related
Jan 28, 2010
when I go to system/preferences/bluetooth manager.I get :No bluetooth Adapters present.Your computer does not have any bluetooth adapters plugged in.
View 3 Replies
View Related
Dec 22, 2010
I have been using ubuntu for a few years now but am a noob when comes to the technical side of things, so apologies for my lack of knowledge.
I am using ubuntu 10.10 on a ZOTAC IONITX-A-U Atom N330 1.6GHz Dual-Core Mini ITX Intel Motherboard and since I have upgraded from 10.04 I no longer have blue tooth capabilities. I have a logitech mx 5500 wireless keyboard and mouse, which uses a bluetooth dongle. This is the strange part as they have both been working until recently.
They both lost their charge and after replacing the batteries in my keyboard it no longer is able to connect. The mouse however works fine, until I dropped it So I bought a microsoft explorer mouse which came with its own bluetooth dongle. Which I plugged in and the mouse works fine.
But when I go to System> Preferences> Bluetooth
I get Bluetooth adapter not present and Your computer does not have any Bluetooth adapters plugged in.
I have spent the last week googling this and can't seem to find any relevant info.
I ran this in terminal code...
Am I wrong in assuming that the logitech and microsoft dongles are being seen?
I have also removed and reinstalled bluetooth and bluetooth manager in the software centre, and the same with synaptic package manager, to no avail.
With both dongles plugged in could this also cause a problem?
Is there another way of starting the bluetooth?
View 3 Replies
View Related
Jan 29, 2010
Actually I am using Ubuntu netbook remix in Benq netbook. In that bluetooth is inbuild. When I use this same ubuntu netbook remix as "live usb" this bluetooth works and searches the devices. But after installing ubuntu remix in harddisk I am getting error as "No bluetooth adapter plugged in" I dont know why. So I again checked with the same "live-usb" this time the bluetooth didn't works. Saying the same error which it shows when I boot from hard disk.
View 1 Replies
View Related
Feb 14, 2010
I have just updated to karmic and whenever i reboot i have to re-enable (turn on) my bluetooth adapter in order for it to work. This wouldn't be much of a problem except for the fact that i use a bluetooth keyboard / mouse.Does anyone have any solution for this?Is there a way i could enable bluetooth from command line?
View 6 Replies
View Related
May 5, 2011
It worked with 10.10, but in 11.04 only partially. It would show up in Bluetooth Manager, and I was able to pair with my phone. But after that it always failed to connect. Tried lots of things before I spent $10 on another nameless Chinese one and that worked fine immediately.
View 1 Replies
View Related
Apr 3, 2011
I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
View 3 Replies
View Related
Feb 13, 2010
I have windows 7 and ubuntu karmic dual boot system.i can easily transfer files via bluetooth in windows 7 but in ubuntu it shows a message bluetooth adapter not connected while as i dont use any such adapter while working in windows .
View 4 Replies
View Related
Oct 12, 2015
I've followed the guide at URL.... but my computer is unable to find any Bluetooth devices. Whether I'm using the command line or gnome-bluetooth, I don't get any results. If I plug in a cheap USB adapter, I'm able to connect and use the devices.My computer is a HP ProBook 4330s running Debian Jessie. And as far as I can tell the Bluetooth adapter is a Ralink rt3592 combination Wi-Fi and Bluetooth PCI card. The Wi-Fi works fine, but when i try to connect to a Bluetooth device, I get no search results.
View 9 Replies
View Related
Apr 28, 2009
I have two BT USB adapters on my fedora9 (2.6.27.19-78.2.30.fc9.x86_64).How i can tell which of them to bind as /dev/rfcomm0 device.It seems that rfcomm.conf doesn't say me too much about.
View 3 Replies
View Related
May 10, 2010
I just got a buffalo bluetooth wireless internet adapter and I need to find out if it can work. I am a linux noob and am using ubuntu lucid lynx, where should I start?
View 2 Replies
View Related
Mar 14, 2011
New install of Mint LMDE (Debian Testing)
I installed Blueman & paired my headset successfully but I get this error message when I connect my headset, "Failed to initialize pulseaudio bluetooth module. Bluetooth audio over pulseaudio will not work". When I go to Pulse Audio Volume Control, it's not showing in my hardware list.
View 1 Replies
View Related
Aug 13, 2009
I am trying to setup multipath with failover policy on openSuSE 11. I have two qla2xxx HBA's installed and they appear to be working. Here is the output of "multipath -l" command
[Code]....
While testing, I pulled one of the two connection to SAN, and the connection failed over to second HBA connection to SAN. When I plug the cable back in, it does not fall back to original connection... It stays in failed state. Also, I noticed that failed disk (sdd disk) comes back as (sdg disk), which is probably why connection does not fall back to original HBA. But, when I run "/sbin/service multipathd restart" sdg disk shows as as enabled in multipath -l...
View 9 Replies
View Related
Jul 4, 2010
I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
[Code]....
View 9 Replies
View Related
May 21, 2011
I got an error while working with NetworkManager in new RHEL6/ Fedora14. I have a ZTE AC 2726 3G wireless modem. i had tried to connect it via NetworkManager . It only requires username and password to connect but the thing is that after putting all the credentials i had checked the option" available to all the user "and while i was trying to save the profile it shows the following error saving connection failed 0 can't write connection type 'cdma'I had google so many times around this error but no better solution is there .
View 1 Replies
View Related
Oct 2, 2015
I bought this wifi adapter to use with my home server running debian Wheezy [URL] ....
I installed realtek-firmware and wireless-tools(including NetworkManager and wpasupplicant). I rebooting and plugged in the wireless adapter and it didn't load the driver. After further research, I found that this adapter required the RTL8188EU driver, which I had to install manually. After manually installing that driver using the source from the iwfinger github [URL] .... and rebooting, I plugged in the wireless adapter and it worked. The wireless adapter seemed to work but after testing it under load(downloading a several GB file from the server and uploading a several GB file to the server) I ran into issues during the tests. I'm not sure what is going on but it seems the driver is failing or it is disconnecting from the network. I checked dmesg and this is what I found,
Code: Select all[ 5478.544704] RTL871X: reg 0x80, usb read 4 fail, status:-71 value=0x0, vendorreq_times:1
[ 5478.544707] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:2
[ 5478.544710] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:3
[ 5478.544712] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:4
[ 5478.544714] RTL871X: reg 0x80, usb read 4 fail, status:-19 value=0x0, vendorreq_times:5
[Code] ....
I'm somewhat new to Debian and I'm not sure what else to do here.
View 3 Replies
View Related
Apr 28, 2010
vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies
View Related
Mar 8, 2011
I have a Toshiba Tecra M5 that I dearly love; its operating system is Fedora 14 which I ALSO dearly love.I have been running Fedora on this Laptop since Fedora 10. And know it has Bluetooth; in fact, I know I've transfferred files from my laptop to my phone (and vice versa) before. However. It does not seem to work right now. When I go into the gnome-Bluetooth app, it just sits there ominously saying "No Bluetooth Adapters Present" I'd very much like to get bluetooth up and running, but I'm not sure what's wrong.
View 3 Replies
View Related
Jun 6, 2010
how do you get connection on the bluetooth
View 1 Replies
View Related
Sep 8, 2010
I have a RTL81817 chipset in my USB wireless network adapter. I installed the driver, but it still didn't work.
In Yast->Hardware->Hardware Information->USB the following details are displayed:
RTL8187B_WLAN_Adapter
-Bus: USB
-Class(spec): unclassified device
-Class: unclassified device
-Device Identifier: 229767
[Code].....
View 1 Replies
View Related
Dec 15, 2015
I bought a bluetooth pen, I connect it via USB, my bluetooth connection is active but I can't find other therminals, and my debian machine it isn't visible to other terminals.
It seems that my bluetooth connection works, but it can't pair other terminals. I want to connect bluetooth speaker, but it seems impossible.
View 3 Replies
View Related
