New install of Mint LMDE (Debian Testing)
I installed Blueman & paired my headset successfully but I get this error message when I connect my headset, "Failed to initialize pulseaudio bluetooth module. Bluetooth audio over pulseaudio will not work". When I go to Pulse Audio Volume Control, it's not showing in my hardware list.
Having trouble with pulseaudio (0.9.21, Debian Squeeze) failing to properly recognize a Turtle Beach X-ray headset?
My tv connects fine, playing Dolby Digital through it without issue, but my computer doesn't. (A possible side effect: Flash videos play in slow-mo when the headset is connected to the computer's bluetooth adapter, but not when the headset is disconnected.)
Is there a way to tell Pulseaudio to give the headset 6 channels?
Some info:
Code: Select all~ » pulseaudio --dump-modules                        Â
module-alsa-card            ALSA Card
module-alsa-sink            ALSA Sink
module-alsa-source           ALSA Source
module-always-sink           Always keeps at least one sink loaded even if it's a null one
module-augment-properties   Arugment the property sets of streams with additional static information
module-bluetooth-device         Bluetooth audio sink and source
[Code] ....
I am trying to get my Debian system running. I have an older Dell Precision 490 with two dual core CPUs. It has 16G Ram, an 150G Intel solid state drive, a 230G data drive, and a 600G backup drive. I have two Samsung monitors attached to the NVIDIA Geforce FX 5xx card. I have been using this machine for several years with Etch, then Lenny, running KDE 3.5. I recently needed to upgrade to Squeeze and KDE4 and have had nothing but problems since. I keep having issues with the video drivers, every time I touch anything the drivers seem to upgrade from the legacy 173 to the current 195.
There have been other library compatibility issues as well (gclib) and the machine has not been stable. This morning the system was running very slowly with X running at 100% (from top) and then the entire system froze. After a hard reboot, X did restart. The Xorg.0.log has the following message:
"Failed to initialize the NVIDIA kernel module! Please ensure that there is a supported NVIDIA GPU in this system, and that the NVIDIA device files have been created properly..."
I'm trying to do the following;
Debian Jessie Xfce amd64 desktop --> stream music --> raspberry pi B+ --> Home amplifier
Raspberry pi running the following kernel Code: Select allLinux raspberrypi 3.18.11+ #781 PREEMPT Tue Apr 21 18:02:18 BST 2015 armv6l GNU/Linux
I have used this guide : [URL] .... Change the following from the guide;
Code: Select allload-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.1.105/24
to
Code: Select allload-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.1.102/24
192.168.1.102= My desktop ipadress.
However, the Raspberry pi don't show up as an output in pulseaudio on my desktop.
I recently installed Kodi on my Wheezy system. Kodi works great but now Pulseaudio is not working. I have sound but now longer have the Volume control on the desktop, and when I try to use Skype there is no sound. In Gnome Classic I selected.Applications>Sound and Video>Pulse Audio Volume Control and get this message: Connection to Pulseaudio failed. Autimatic retry in 5s.In this case it is likely because PULSE_SERVER in the Environment/X11 Root Window Properties or default-server in client.conf is misconfigured.
View 1 Replies View RelatedI have amd64 Debian Jessie and i386 Debian Jessie installed on my laptop. I wanted to start x86 app that is installed on my x86 OS from my amd64 OS using chroot.
My mounts inside chroot:
Code: Select all/dev/sda7 on / type ext4 (rw,relatime,data=ordered)
/dev/sda5 on /tmp type ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda5 on /etc/resolv.conf type ext4 (rw,relatime,errors=remount-ro,data=ordered)
tmpfs on /dev/shm type tmpfs (rw,relatime)
proc on /proc type proc (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000)
none on /sys/fs/cgroup type tmpfs (rw,relatime,size=4k,mode=755)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
/dev/sda5 on /var/lib/dbus/machine-id type ext4 (rw,relatime,errors=remount-ro,data=ordered)
sda5 is host OS and sda7 is guest OS
when I start any x86 app I can see "failed to create secure directory (/run/user/1000/pulse) permission denied" how to make pulseaudio to work inside chroot?
also what this command exackly does?
"pactl load-module module-simple-protocol-tcp rate=48000 format=s16le channels=2 source=auto_null.monitor record=true port=8000 listen=127.0.0.1"
How do I remove pulseaudio without it having to take gnome-bluetooth with it?
View 5 Replies View RelatedI have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
I've been having a problem with Bluetooth on Debian 8 Jessie i just can't connect to any bluetooth device, i have only tested my smartphone and my bluetooth headphones, i am using blueman manager.After attempting to connect to my bluetooth headphones/smartphone it just disconnects and says "Connection Failed: No such file or directory",i don't know if i have to create a config file or something, the error message doesn't say anything but the error previously mentioned.
View 7 Replies View RelatedI bought a bluetooth pen, I connect it via USB, my bluetooth connection is active but I can't find other therminals, and my debian machine it isn't visible to other terminals.
It seems that my bluetooth connection works, but it can't pair other terminals. I want to connect bluetooth speaker, but it seems impossible.
I'm running Debian Jessie 8.2. I have a bluetooth USB dongle connected to my machine.
I run `sudo bluetoothctl -a` then do the following:
Code: Select all  [NEW] Controller 5C:F3:70:6B:57:60 debian [default]
  Agent registered
  [bluetooth]# scan on
  Discovery started
  [CHG] Controller 5C:F3:70:6B:57:60 Discovering: yes
  [bluetooth]# devices
[Code] ....
But I *can* connect to my iPhone this way. Why can't I connect to my Bose Mini II SoundLink speaker?
Just resently I managed to activate internal bluetooth adapter. I'm not expert in command line and everything I could was done in GNOME. Same like most other systems an icon appears in panel bar whenever I used to type <modprobe omnibook ectype=14>. It took me some time to set everything with the kind help from URL... So the thing is that after fingering with some newly installed packages concerning b-tooth utilities that icon is gone and b-tooth is not active.
View 2 Replies View RelatedI've followed the guide at URL.... but my computer is unable to find any Bluetooth devices. Whether I'm using the command line or gnome-bluetooth, I don't get any results. If I plug in a cheap USB adapter, I'm able to connect and use the devices.My computer is a HP ProBook 4330s running Debian Jessie. And as far as I can tell the Bluetooth adapter is a Ralink rt3592 combination Wi-Fi and Bluetooth PCI card. The Wi-Fi works fine, but when i try to connect to a Bluetooth device, I get no search results.
View 9 Replies View RelatedToday, I use the vnc tool to connect the server , but it has the following message:
test@xxx: ~ vi ~/.vnc/xxx:1.log libhal.c 644 : Error connecting to system bus: Message did not receive a reply **(gnome-volume-manger:30626):WARING**: manager.c/912:failed to initialize HAL!
The server's os is CentOS 4.7 x86_64, I tried to google for the answer, but had no anything useful information.
Everytime I log into Gnome Desktop I get this message :
failed to initialize a HAL context
Here is the exact error message when I look into auth.log
Quote:
gnome-keyring-daemon[22720]: failed to initialize a HAL context: (null)
gnome-keyring-daemon[22720]: Scheduling hal init retry
I'm on a Debian Linux system.
Everytime I log into Gnome Desktop I get this message : failed to initialize a HAL contextHere is the exact error message when I look into auth.logQuote:gnome-keyring-daemon[22720]: failed to initialize a HAL context: (null)gnome-keyring-daemon[22720]: Scheduling hal init retry
View 2 Replies View RelatedI just finnished my slackware upgrade to current (as you may know from my previous post), and now i am facing another problem.When i type startx i get error:Failed to initialize the GLX module,...,try reinstalling the NVidia driverno screens foundOkay, i thought i should reinstall the Nvidia drivers..And then when i ran the driver install file, i got another error:Unable to load the kernel module 'nvidia.ko'....Kernel module load errorWhat should i do now ? Nothing works! New kernel
View 6 Replies View RelatedI'm running squeeze. I installed from the netinstall cd (graphical install). I need to get pulseaudio, so here is my question: Is there any additional configuration you need to do after installing the "pulseaudio" package. (to integrate with alsa, gnome integration, multimedia keys etc.)?
View 3 Replies View RelatedI receive following error when trying to enable strigi. "strigi service failed to initialize, most likely due to installation problem" I have searched internet, obviously not good enough, and i have found nothing. Nothing that would work. i have tried installing openjdk-devel as suggested, soprano. And still nothing. I have same problems on both boxes running Fedora 12.
View 1 Replies View RelatedRecently I started getting pop-up saying:
Code:
Failed to initialize
Failed to initialize packaging backend
This may occur if other packaging tools are being used simultaneously.
under more details i get:
Code:
There are unfinished transactions remaining. Please run yum-complete-transaction as root. I get to terminal, and as a root I try yum-complete-transaction, but it just says there are no unfinished transactions left. I tried to update thru yum, but this is what I get:
Code:
# yum update
Loaded plugins: fastestmirror, presto, refresh-packagekit
Determining fastest mirrors .....
After lots of googling, I tried:
"yum clean all",
"yum-comlete-transaction",
"rm -f /var/lib/rpm/__db*" + "rpm -vv --rebuilddb" + "yum clean all",
Everything else is working well, and I am able to update with "--skip-broken", but I keep getting this pop-ups. I use fedora 12.
Since Livna went down, I've been having having problems with KPackagekit. I disabled the Libna repo by setting enabled=0 in /etc/yum.repos.d/livna.repo, and have been able to update with Yum.KPackageKit fails on me now with the message "Failed to initialize backend. This may occur if other packaging tools are used simultaneously."Then it fails to finish, which causes me to reboot before I can use Yum successfully.Under Settings, I see no indication that it knows where the repositories are, and no way to add repos.
View 1 Replies View RelatedI have 2 NVIDIA card intalled - GT 240 and Geforce 9500.After updating by repo kernel to ver 2.6.37.6-0.5.1 and Nvidia driver by to ver 270.41.06 X server cant start
Part of X server log
347.737] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:2:0:0. Please
[ 347.737] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[ 347.737] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[code]....
So for now only dismounting one of cards gives working X server.
I just installed Ubuntu 10.10 and updated it completely. Then allowed it to install the nvidia-current package for my nvidia graphics card. I do see the GLX module load.
Code:
[ 11.298] (II) LoadModule: "glx"
[ 11.298] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[code]....
I have error in KPackageKit when i try to install anything or check for updates:
Failed to initialize packaging backend. This may occur if other packaging tools are being used simultaneously.
Details: There are unfinished transactions remaining. Please run yum-complete-transaction as root.
I don't know anything about other packaging tools - I think I don't using any. Yum works fine in terminal. Reinstall PackageKit and KPackageKit files doesn't helped me. I also try to rebuilt rpm db:
rm -f /var/lib/rpm/__db*
rpm -vv --rebuilddb
yum clean all
I'm using Fedora 12 x86_64.
im using a toshiba satellite u305-s2804 laptop with windows 7 installed it has 2gb ram .intel centrino dual core processor,160 gb hd ., what i wanna do is dual boot between windows and opensuse 11.3 which i downloaded today . i went ahead and set up a partion for the linux to be installed on (the space i gave linux is 25 gb) . but during the installation i got this error
failed to initialize the software repositories .aborting the instillation.
Every time I start up my Ubuntu 10.04 install, instead of the graphical login screen, I get an error dialog stating the following:
Code:
Ubuntu is running in low-graphics mode. The following error was encountered. You may need to update your configuration to solve this.
Also in the dialog are several lines of text:
Code:
(EE) <date and time> Failed to initialize the NVIDIA kernel module. Please see the system's kernel log for additional error messages and consult the NVIDIA README for details. ***Aborting*** Screen(s) found, but none have a usable configuration.I'm not sure what it means by "kernel log," or where any error logs might be saved. Any tips? Perhaps if I can find such error logs, posting them will help diagnose the problem.
If it matters, I have 2 monitors, an NEC AccuSync 120 CRT and a Samsung BX2440X LCD. I use them in Xinerama mode with the Nvidia drivers under my Ubuntu 9.10 install and have no problems there. To get normal graphics under 10.04, I have to start up in low-graphics mode, kill X server, reinstall the Nvidia proprietary drivers, and restart the X server. Then I have to do it all over again after the next restart, every time I want to run 10.04.It's very annoying.Also possibly relevant: I use the latest 32-bit Nvidia drivers for 10.04, version 256.53.I've found a few other threads where people had problems similar to this, but nothing exactly like my situation nor any real resolution so far. I hope it can be fixed, because there are other things about 10.04 that I really like.
I am recently getting a very weird error on my Webmin. The result of this problem I suspect is I am no longer able to log into my Maia Mailguard which is my Spam Viewer.
Quote:[BEGIN failed--compilation aborted at (eval 17) line 1.
restarting miniserv
[06/Apr/2011:23:34:09 -0400] Restarting
[06/Apr/2011:23:34:10 -0400] miniserv.pl started
[06/Apr/2011:23:34:10 -0400] Perl module Authen::PAM needed for PAM is not installed : Can't locate Authen/PAM.pm in @INC (@INC contains: /usr/libexec/webmin /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at (eval 17) line 1.
BEGIN failed--compilation aborted at (eval 17) line 1.
Failed to initialize SSL connection
Failed to initialize SSL connection
When i want to configure my touchpad on my dell inspiron 1525 with debian lenny then i got this message: gsynaptics couldnt initialize you have to set 'shmconfig' 'true' in xorg.conf or xf86config to use gsynaptics My touchpad is an alps and not a synaptics so far i can see. My xorg.conf is this: [URL]
View 13 Replies View RelatedI'm running ubuntu 9.10 64 bit (2.6.31-20-generic) on a Z600 HP. My graphics card is Nvidia quadro NVS450. I am using the Ubuntu Nvidia driver 185.18.36. I am experiencing random, daily system freezes where the system has to be manually rebooted. After installing the crash dump packages I am now getting a crash dump file and it's clear the problem relates to my graphics card.
Is this a red herring or the cause of my problems:
(EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so
(EE) Failed to load module "glx" (loader failed,
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
The NVIDIA X Server Settings shows a message "Failed to query the GLX server vendor".
Here is my xorg.conf file:
$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
Section "ServerLayout"
[Code]...
I have had this error for way too long. This post will be done in parts. I've had it for months now and I'd like to solve it. Every suggestion on linux forums, ubuntu forums, or some XYZ-linux blog seems to either work for just one boot or none at all. since I have updated my kernel on several occasions, I have also re-installed my NVIDIA kernel module by downloading the run file from NVIDIA's website. It also follows instructions from this post. I have installed the linux header files and the xorg-dev files from repository
I have also tried this.
My hardware (Alienway m17x - VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 260M])
Code:
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
[Code].....