I have CentOS 5 installed on VPS server running VZ with ostemplatecentos-5-i386-afull.
Some details of system:
[root@vps ~]# cat /etc/redhat-release
CentOS release 5 (Final)
[root@vps ~]# uname -a
Linux vps.abix.info.pl 2.6.18-92.1.13.el5.028stab059.6PAE #1 SMP Fri Nov 14 20:46:53 MSK 2008 i686 i686 i386 GNU/Linux
[Code]...
Sometimes during bootup I get the following error:Starting Dovecot Imap: Fatal: listen(995) failed: Address already in useI tried to figure out what I could with the command lsof -i :995 and this was my output:COMMAND PID USER FD TYPE DEVICE SIZE NODE NAMErpc.mount 2936 root 7u IPv4 9201 TCP *:pop3s (LISTEN)When the system boots without the dovecot error the output of losof -i :995 is as follows:
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
dovecot 3079 root 8u IPv6 9419 TCP *:pop3s (LISTEN)
pop3-logi 3157 dovecot 1u IPv6 9419 TCP *:pop3s (LISTEN)
[code]....
I am running debian testing, amd64 architecture on my box. I have 3 gmail accounts that I use regularly. I have used mainly thunderbird/icedove to access my mailboxes via imap.However, now two of them have really several tens of thousands of emails I often experience difficulties in dealing with them (the connection often freezes, browsing my folders is a pain).I tried also sylpheed and claws, but the situation has not really improved.I do not think there is anything fundamentally wrong in the way I configured my accounts on the various clients (actually, some of them even boast automatic setup of gmail accounts).
View 5 Replies View RelatedI am looking for a PHP based IMPA client with these requirements:
- User accounts (not same as imap email accounts)
- Each user can add multiple IMAP emails to his account and check/use them.
Is there any solution for my requirements. I checked Squirrelmail and roundcube but I am not sure they can do this.
Otherwise I will need to either develop a system from scratch or modify an existing one to do my job. I hesitate to develop myself as it will take months if not years to make it stable and bug free.
Whenever I try to login via SquirrelMail into my account I get this error message:
ERROR: Connection dropped by IMAP server.
Is there any Linux software that fetches emails from let's say 3-d party imap server (ex imap.gmail.com) and allows you to access it in nice format through web interface.
So - if I run my own LAMP server I could just type in my ip address and access emails/calendars.
I guess something like Outlook Web Access but free and for Linux?
Is that what Zimbra is?
I'd like to configure Evolution (or Thunderbird) to delete Gmail messages. When I select messages and hit "Delete", the messages go to my local trash and they loose their Inbox label in Gmail. I would like that in Gmail, they loose their Inbox label and go to [Gmail]/Trash so that they'll be deleted after a month.
Could I configure the "delete" key of my keyboard to move msg to [Gmail]/Trash ? Could I configure another key to move msg to [Gmail]/Trash ?
What other solution ? Because moving to the trash is not convenient, it takes a lot of time without a key shortcut.
[Code]..
i was able to connect the first time following the instructions here: [URL]
1. first time i was able to connect i used the nx client for Mac OS X. I logged off.
2. then i decided to test this using Windows nx client and i got:
NX> 203 NXSSH running with pid: 604
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[Code]...
Recently i configured Postfix with Cyrus-Imap and it all worked fine unless i wanted to allow also AD users to use Squirrelmail.Currently AD users are able to logon to ssh server without any problems.
- wbinfo -u & -g is fine
- testsaslauth - passed
- telnet to localhost 143 + a LOGIN user password - passed
- cyradm shows active mailbox for particular user
imap i pam.d:
#%PAM-1.0
auth include system-auth
account include system-auth
The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.
View 3 Replies View RelatedError installing mod_ssl on centos 5.7. Do not install the mod_ssl module says there is a package conflict, some way to fix it?. is a 64-bit
[Code]...
I'm trying to install CentOS 5.5 on an old Pentium 4 desktop PC I have, which is not being used for much other than being a MTA, and I want to migrate this functionality onto the CentOS platform for stability (Windows is a perpetual nightmare. I partitioned a spare 20GB to experiment with, and I want to install CentOS into here to play around with first so I can move my files around between Windows and CentOS, until I'm happy all of the stuff is gone, then I can scrub the Windows partition and claim the space for CentOS.
So, I've downloaded and burned the DVD and tried to install. I start the install with no args from the main install menu, and the process goes through some probing and then comes up with the "Welcome to CentOS" menu. I go through this, and then it tries to start X Server. It fails, and falls back to text mode. I get the "Welcome to CentOS" screen again, and then proceed through it. I set my keyboard layout to UK, then this message comes up at the bottom of the screen:
"_X11TransSocketINETConnect() can't get address for localhost:6001: Temporary failure in name resolution"
then on the next line: "Cannot open display :1" If I force the install to text, by typing "linux text" at the first menu, I get about the same way through, but the install just hangs doing nothing, and no disc access to the install disc.
I've been running Courier IMAP for many years now, but when I added gmail's IMAP to my Outlook I noticed something interesting: when you delete a message, it gets thrown into the trash instantly.
With Courier IMAP (or any other IMAP server, for that matter), when you delete, it first marks it for deletion. Then after you Purge Deleted Messages it either gets rid of them or moves them to trash.
Is there a way to implement this in Courier IMAP?
I'm looking for a method to sync my calendars on my IMAP server with both my Thunderbird/Lightning any my Blackberry. I found "IMAP Calendar Proxy" here recently, but it has been inactive for 5 years. I've seen people suggesting the use of services like Plaxo and such, but I don't like the idea of a third party messing with my calendars and contacts. Also, I've had to remove several viruses from computers with Plaxo, and I'm not sure if it in itself is a virus or not..... It certainly is a thorn in my side as is. This is for my personal IMAP server, so I'd prefer a free solution even if it is more difficult to install than a paid version. I mainly need it to just sync my calendar to my Blackberry and Thunderbird and couldn't care less about the contacts.
I've been Googling for things for quite some time now, and haven't really found anything that says that it will work with Blackberry and Thunderbird. They really only give a sense of maybe with nothing really defined. I can put on an Ubuntu server to sync everything? I don't want to leave my computer on all the time, and RIM has yet to come out with something decent to sync Blackberries and Thunderbird properly as far as I know.
I need to recompile PHP with imap support.
Serwer info:
CentOS 5.3 64-bit (Final)
Apache: 2.2.11
PHP Version: 5.2.9
Quote:yum install php-imap
I want to add the imap module into my php
View 1 Replies View Relatedhow to install Courier IMAP server and they all say the same thing, but they keep giving me problems.URL... is a link to the page I'm working on.I created the user, edited sudoers manually since I can't effectivly use visudo in the terminal since I don't know how to save. I also made sure that I restarted after I edited it in order to make sure it took effect. I used su compileuser and just logging in as compileuser and opening a terminal. After I made the user and edited that file, I created the directory mentioned and ran the command to create .rpmmacros. After that I got to work on wgetting the files and installing them and what not. The first one compiled and installed and so did the last one. The command "rpmbuild -ta courier-imap4.6.0.tar bz2" would not go though properly. This one I need to run as a non-root user and I've tried using every way possible to be as distant from root as possible, but it still gives me this at the end.
View 3 Replies View Relatedim new in cent desktop i wanna install a powerfull mediaplayer like VLC i search for installing guide but the all told about RPMFusion i wanna install it but i see an error Missing Dependency: system-release >= 11 is needed by package rpmfusion-free-release-11-2.noarch (/home/Arash/Desktop/rpmfusion-free-release-stable.noarch.rpm)
View 1 Replies View RelatedI'm new to CentOS, having always used Slackware in the past. I'm trying to get Cyrus 2.3.7 IMAP working with Procmail 3.22, and having a slight issue. My current setup in sendmail.mc is as follows:
[code]...
The server I'm running is virtually stock CentOS - it's running on a xen virtual host, started as CentOS 5.1 (32 bit) when that was fresh, it's at 5.5 now and updated nightly. All packages except postgresql and php are from CentOS and EPEL.
I'm running dovecot on it, and for long time, squirrelmail connecting via localhost was good enough. All external ports were firewalled by the CentOS firewall (just 25,80,443,custom ssh are currently open).
Now I need to allow an external imap client to connect.
I have generated ssl key and configured the dovecot configuration and it should be good to go, but gosh dangit, I can't remember how to open the port in the configuration.
I did it before when I set up ssh to run on a non standard port after I got sick of constant brute force attack on port 22, but I can't recall what I did and the various tutorials I find online all tell how to do it with the GUI tool, but I don't have any GUI stuff installed.
system-config-securitylevel-tui
Is I'm pretty sure what I used to open up my custom > 1024 ssh port, but I can't remember how I used it to open that port and it doesn't seem intuitive. Also, do I need to use 993? I'd almost rather use something custom above 1024, as long as thunderbird supports it (don't care about any other mail client)
Finally, my smtp server is postfix and port 25 is already open (but not an open relay, I check it about every 3 months). For requests to send mail from a client, I would really like some authentication of some type - as in only relays for IP addresses that have recently successfully logged in the secure imap port.
I was trying to install Munin on my CentOS VPS via yum, but it showed a few "Missing Dependency" errors which prevented the installation to work. I'm pretty sure all the required Perl packages listed on this page are installed on my server(went through the list one by one using cpan), couldn't figure out what's the issue.
Code:
root@spike [~]# yum install munin
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: dist1.800hosting.com
* base: mirror.stanford.edu
* epel: mirrors.solfo.com
* extras: mirror.hmc.edu
[Code].....
I tried to install with this command:
rpm -Uvh webmin-1.450-1.noarch.rpm
And got these error messages.
Quote:warning: webmin-1.450-1.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 11f63c51
error: can't create transaction lock on /var/lib/rpm/__db.000
I am facing the following error when im trying to install the openldap and running the ./ configure command.
./configure
Configuring OpenLDAP 2.4.21-Release ...
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
[Code]...
I am running SquirrelMail version 1.4.8-5.el5.centos.10 on a CentOS 5.6 64-bit distribution with MailScanner 4.83.4, Sendmail 8.13.8/8.13.8, and Dovecot 1.0.7 release. One user is having problems connecting via the SquirrelMail interface to his e-mail. Whenever he tries to connect, he gets the following error message:
Quote:
Error: Connection dropped by IMAP server with dovecot
I have tested another user account, and that user is able to connect without issue. I confirmed the presence of dovecot.index, dovecot.index.cache, and dovecot.index.log files in the user's <HOME DIR>/mail/.imap/INBOX folder. The /var/log/maillog files do not list any apparent error messages with SquirrelMail.
Small server running 5.3 - stock postfix configured to use Maildir. Dovecot configured but both pop and imap ports blocked by firewall. Access to mail is via Squirrelmail via https. Configured to virus scan via ClamAV. Works just fine. Now I want to add procmail filtering. So I create these two files - ~/.forward and ~/.procmailrc in my user home dir: "|exec /usr/bin/procmail -f- || exit 75 #mpeters"
View 1 Replies View RelatedI am administrating a server with CentOS installed. It came with qmail and courier-imap preinstalled, and Plesk.I need to manually add email accounts outside of Plesk, because my 1-domain Plesk license only allows the creation of one email address (yes, it sucks).
When I say add email account I mean creating a new email address, have email for that address be stored in its maildir, and have a corresponding imap (and hipefully also pop3) account that will be able to read that mail. All this with virtual domains.I've already found out how to create the new email addresses for qmail, so that email for the new email address is being delivered correctly. Now I need to create the imap/pop3 accounts for courier.
For the qmail part, I create a folder in in /var/qmail/mailnames/virtualdomain.org/username and a maildir called Maildir inside it. This is how the first mail address was created by Plesk and i'd like to maintain the same structure. As I've said, the qmail part is already working, I need to get the courier-imap part to work. Ideally, it should accept login with both short (i.e. myuser) and long (i.e. myuser@virtualdomain.org) user names.
Currently the only authentication module that is enabled in courier-imap is authpsa, which is Plesk's authentication module.in order to add more authentication modules, do I just need to add them to the authentication module list in /etc/courierimap/imapd, or do I need to reinstall courier-imap with support for such authentication modules? I thought I would only need to add them to the list, but I've noticed that the /usr/lib/courier-imap/authlib/ folder only contains a binary called "authpsa". Does that mean that other authentication modules are not even installed? If so, can I install them without reinstalling courier?
The second question is, what would be the most recommended authentication module that would make it easiest to create new email addresses/accounts from the command line? I need to be able to write a shell scripts capable of creating a new email address with all that is needed, and I'd like to keep this script as simple as possible, so for example I'd avoid mysql-based authentication as it sounds rather complicated. And the last question is, if I do need to reinstall courier-imap, how can I install a package without recompiling it? Will my one existing mailbox keep working?
I was trying installing teamviewer on a CentOS 5.5 machine and received the following error:
# rpm -ivh teamviewer_linux.rpm
error: Failed dependencies:
libasound.so.2 is needed by teamviewer6-6.0.9224-1.i386
libc.so.6 is needed by teamviewer6-6.0.9224-1.i386
libc.so.6(GLIBC_2.0) is needed by teamviewer6-6.0.9224-1.i386
libc.so.6(GLIBC_2.1) is needed by teamviewer6-6.0.9224-1.i386
libc.so.6(GLIBC_2.1.2) is needed by teamviewer6-6.0.9224-1.i386
libc.so.6(GLIBC_2.1.3) is needed by teamviewer6-6.0.9224-1.i386
libc.so.6(GLIBC_2.2) is needed by teamviewer6-6.0.9224-1.i386 .....
I am looking for gcc installation in CentOS 5.4. I cannot use yum install since not connected to internet. I tried to do sudo apt-get install build-essential but received the following error: sudo: apt-get: command not found How to install gcc in my Linix machine?
View 2 Replies View RelatedI try to install #yum groupinstall 'Development Tools' it's install all things but at the end it's showing error
View 2 Replies View RelatedI have configured postfix and sendmail in my fedora11 i phased some problem i added before installing 2 users they can able to logged in squirrel mail but when i create a user they cann't able logging into squirrel mail they are getting bleow error
##########################
ERROR:
ERROR: Connection dropped by IMAP server.
###########################