Ubuntu :: Error - Phy0: Noise Floor Calibration Timeout
Jan 29, 2010
I get the following error when BOOTING up with Ubuntu 9.10 & in dmesg:
phy0: noise floor calibration timeout
I think it is also causing one of my USB Serial devices to work improperly.I tried changing all the hardware (laptop(motherboard etc.), USB Serial device, & USB hub) but that did not resolve the issue.My code was previously working on an older version of ubuntu (9.04).As I boot up (before any of my software is run), bytes are written to my USB Serial (FTDI SIO) device.I also tried this on a fresh install & it appears that some bytes are being written to the serial divice(20 x 2 character LCD) while it is booting upIs there a bug with Ubuntu 9.10?
View 3 Replies
ADVERTISEMENT
May 22, 2010
I have the Dell Latitude D400 with the B4306 PCI card. I followed the instructions in the stickies on this forum and downloaded and installed the firmware. Still could not get the wifi card to work. Here is the read-out:
[Code]....
I am just beginning with Linux - please take pity on me.
View 1 Replies
View Related
Dec 29, 2010
I guess blueprint will work, but I want to get a basic layout of my house with where the wires and plumbing in the walls are so that I do not need to find everything when I want to make a change.
Is there any software that could do this? Something like a construction planner or such?
View 2 Replies
View Related
Mar 4, 2011
I'm looking for a shop floor maintenance program that runs with Ubuntu. I have equipment that I need to track and schedule general and preventative maintenance on. Lots of Window junk ware available. I haven't found anything for Ubuntu yet. Can anyone recommend a program?
View 2 Replies
View Related
Jul 9, 2010
Down graded from ubuntu 10 because of phy0 using to much CPU power for no reason machine is sluggish, now it has become worst using Ubuntu 9.10.
View 5 Replies
View Related
Aug 4, 2011
I set the default os to boot as windows 7 with a timeout of 1 second. I thought that this would be enough time to switch os ubuntu when i need to, but I am unable to. How can i reset the timeout to 3 seconds? I also cannot view the ubuntu partition within windows because of ubuntu's file system.
View 9 Replies
View Related
Jun 8, 2011
One person using our DNS servers reported a very curios problem. When he tries to access [url] he gets a timeout error. I tried loading the site using chrome, firefox and ie8 and I get the same results.
Here is what dig gives me:
If I use google DNS I get the correct response:
View 7 Replies
View Related
Aug 31, 2010
I used to use Ubuntu 10.04. Never had this problem. I went back to Windows 7 and then came back to Ubuntu, and 10.04.1 was released. After some usage of wireless internet, it disconnects from the access point, and phy0 has 100% usage. [URL].. I'm not the only one with the problem. I downgraded to 9.10, and haven't had that problem since the downgrade.
View 1 Replies
View Related
Mar 16, 2010
Is the ubuntu keyserver broken? I am trying to install a package and every time I try to install the key I get a time out error.
apt-update give me
Code:
W: GPG error: [URL karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 932062C9CD30EE56
Then if I try to install the key I get this?
Code:
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys CD30EE56
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv-keys CD30EE56
gpg: requesting key CD30EE56 from hkp server keyserver.ubuntu.com
gpg: keyserver timed out
gpg: keyserver receive failed: keyserver error
Can I tell ubuntu not to bother with the key. I know the package is good and safe to install. I should be the one to judge if its ok to install not ubuntu.
View 1 Replies
View Related
Jul 24, 2010
I have a Gretag-Macbeth Eye-One monitor calibration tool that (along with the Epson printer calibration tools) I use on my Windows machine to get W.Y.S.I.W.Y.G. color photography printing. Am curious as to IF the thing can be run under Ubuntu (using 10.04). Know that it will have to be run in Wine or some emulator. has any one done this? And how was it accomplished AND (most importantly) DOES IT WORK? This is NOT one of those "I gotta get this working" things. just that I WOULD like to calibrate the monitors on the Ubuntu machines I have.
View 9 Replies
View Related
Nov 25, 2010
I've got a new monitor which has a .icm profile on the CD. I would like to calibrate my monitor and found lprof. It's got a nice GUI but to someone new to the whole monitor calibration ballgame it's not that easy to work out. Is there a way I can simply import the .icm profile? Is that enough, or do I need to do more set-up after that? Do the changes in lprof affect everything that appears on my screen? (I mean, once it's set-up, I don't have to apply anything to various applications like gimp/digicam?)
View 1 Replies
View Related
Jan 27, 2011
a table LUT, which is now loaded with CLTest.exe running under Wine. Is there any port, packet, etc. allows to do it directly? a CRT monitor DiamondPro 930SB, eventually swam color ... on small brightnesses all blue leaves. calibrator Spyder3 ELITE with native software "Caliber", builds a profile, but at low brightnesses blue green and red is the same. gray gradient at low brightness blue. for Spyder3 ELITE found under Win freeware solutions seers Spyder3: [URL]... until the end has not passed. the white point set at the temperature using the native software (torsion on the monitor levels). by [URL]... described on [URL]... manually and visually tuned curves of exposed white to black so conditionally gradient that was finally gray.
[code]...
View 1 Replies
View Related
Feb 21, 2011
type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 4 Replies
View Related
Jun 28, 2011
I have multiple computers set up in my home (self education on networking) with one used as the main machine, and the others set up as a variety of server types. The main machine is running Lucid, as gui based os. The others are all running the server version. NO Domain controller is installed, no DNS server is installed.
ALL of the server machines boot to a login prompt, allow user name and password entry, and then will fail to login with a timeout error. After anywhere from 8-15 tries, the login will eventually succeed. Error also occurs when logging in via ssh.
View 6 Replies
View Related
Sep 12, 2010
I'm running sendmail 8.14 which sends out thousands of email. I'm getting several timeout error on only a few particular hosts. What I found is almost all of them are Exim 4.69
maillog shows
--> timeout waiting for input from ..@xxx during client greeting
after several tries, I finally got bounce back with
--> 451 4.4.1 reply: read error from xxx.com.
.. Deferred: Connection timed out with xxx.com.
Message could not be delivered for X day
Message will be deleted from queue
When i search though maillog with all of those error and they all seems to be running Exim and they are different mail domains.
View 1 Replies
View Related
Jan 21, 2011
I'm attempting to install Webmin in Endian I download the tar.gz file and ran setup.sh and it says it is installed, however it doesn't let me go to the webpage it says. I get a timeout error. I'm using the current version of endian and webmin.
View 4 Replies
View Related
Dec 4, 2008
i was able to connect the first time following the instructions here: [URL]
1. first time i was able to connect i used the nx client for Mac OS X. I logged off.
2. then i decided to test this using Windows nx client and i got:
NX> 203 NXSSH running with pid: 604
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[Code]...
View 10 Replies
View Related
Feb 7, 2016
I was compiled a new kernel version 4.4 of debain 8.2 amd64, i've issue > tsc: Fast TSC calibration failed, and I'm stay on busybox. Fortunately, I've backup and i can to boot on 4.3 version, it's a choise on startup OS !
I thinking that i compile a new kernel with 4.3 version, i do it, and now have got a same issue (tsc: Fast TSC calibration failed) !
I think that there are adding a new modules while compilation of 4.4 version. I've saw to google if this issue are listing, the answer is yes ! but now i have only 3.6 version for booting ...
View 14 Replies
View Related
Feb 6, 2011
After a few tries, I managed to install Ubuntu on my 3rd generation Macbook Pro (MacbookPro3,1). I installed the proprietary drivers for the Nvidia graphics card and got all the other features working with the information from this page. However, I am having various problems getting the screens working as I would like. When my laptop is at my desk, it is connected to an external 24-inch monitor via DVI, however I regularly disconnect this screen when I go to uni etc.
Ideally I would like Ubuntu to do the following (all of which I can do in Windows and Mac, or the equivalent thereof): Auto-detect when the external monitor is plugged in, set that monitor as the primary screen (with gnome panel etc). And auto-detect when it is unplugged and set the laptop screen as primary.
Support moving windows between both screens Compiz on both screens Separate colour calibration on each screen So far, I have only been able to get a subset of these working at once. I got 2 working alone, without any compiz and the colour calibration only worked on the laptop screen. I got 3 and 4 working without being able to move windows between screens. I have not been able to get 1 working at all - when I disconnect the monitor, I have to tell the nvidia control panel it is gone.
Is there any way to get all four of these things working? I would be willing to sacrifice 3 if 1, 2, and 4 were all working. (I posted this thread to Apple users as well, but I figure there will be more activity here).
View 1 Replies
View Related
Jan 18, 2011
I have a windows 7 box and a debian 5.0 box connected to a linksys wrt300n router. I can access the linux box from windows 7 through ssh. I used to be able to access the linux box from outside the LAN, but when I was messing with the ssh port configuration (at least I think this was what happened), i lost my ability to connect. I tried writing a new sshd_config file so that it is much simpler:
Protocol 2
PasswordAuthentication no
UsePAM yes
I tried directly connecting the linux box to the internet to rule out a router firewall issue that i was missing. iptables -L yields nothing, as I have since rebooted the machine since messing with iptables rules. But still, when I try to ssh in from outside the LAN, I get a connection timeout error after a 10-15 second hang.
View 14 Replies
View Related
Sep 8, 2010
I am trying to use Tiny Core as the OS for a fairly old embedded device using a Pentium 100 with 64MB Ram.
I managed to get the Tiny Core image loaded onto a 128MB CF card. When I turn the box on, it presents me the Grup screen and I can select the bootup option (tinycore). However, soon after I am getting a DMA Timeout Error.
Also in this link: http://www.linuxquestions.org/questi...ble-it-734489/
Now, I am not familiar with Tiny Core all that well, and neither am I sure of how to modify the initramfs to include: hdparm -d0 /dev/hdb.
View 2 Replies
View Related
Sep 22, 2010
for some reason, which I have exhausted all my thoughts upon..
I have mysql 5.0.77
I just made an amendment to the auto_increment_increment variable.. from 10 to 1
Gone to restart mysqld (im on redhat FYI) and get the error:
'Timeout error occurred trying to start MySQL Daemon.'
It fails to stop, and obviously fails to start.
I have included below my 'my.cnf' file but I cant see any issues with it, and can't for the life of me think why there is something wrong.
If I ever come across an issue, I don't tend to ask but instead try and figure it out (usually with success) but this time.. I just cannot get my head around it..
View 7 Replies
View Related
Mar 10, 2009
I have Centos 5.1 and im a total newbie. I have managed to get it running with Apache and PHP but after I install mysql it fails to start with the above error. I have removed it as well using YUM and reinstalled it but it still will not start.
View 4 Replies
View Related
Jul 16, 2009
I am trying to set my root password for my mysql database. After I enter /etc/init.d/mysqld start
[code]...
Timeout error occurred trying to start MySQL Daemon. Then when I try to set the password for my root account I get
[code]...
View 5 Replies
View Related
Jun 29, 2010
I have fedora version 8 with mysql 5.0.45 installed. I have also installed drupal. Recently drupal gave me an error "error code 28". When i checked it out it seemed to be with the db. When i tried to created a db (for testing purposes) in root...i wasn't able to. so then i tried to restart mysql ...it stopped but unfortunately i have not been able to get mysql back up...i get a message saying
"Timeout error occurred trying to start MySql Daemon".
View 4 Replies
View Related
Feb 4, 2010
I was having a problem on my squid server whereby 1 website would timeout daily and return a nscd not found error: [url]....There may be other sites but this is the only one I know of. A selection of other sites still work correctly, which is the strange thing.I have found that by restarting the dns cache everything works again: /etc/init.d/nscd restart.I never know quite when this will timeout so it is not very good for people accessing that site on the server.
View 3 Replies
View Related
Jun 2, 2011
I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110602 18:28:14 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
[Code]...
View 1 Replies
View Related
Feb 15, 2010
i m facing same error in most of the HCL servers. the problem is that it throws error while booting and sometimes not throws error. the error is :-
Feb 13 13:17:25 fe13s kernel: Adapter 0: Bus A: The SCSI controller was reset due to SCSI BUS noise or an invalid signal. Check cables, termination, termpower, LVDS operation, etc.
Feb 13 13:17:30 fe13s kernel: Adapter 0: Bus B: The SCSI controller successfully recovered from a SCSI BUS issue. The issue may still be present on the BUS. Check cables, termination, termpower, LVDS operation, etc
Feb 13 13:29:15 fe13s kernel: Adapter 0: Bus B: The SCSI controller successfully recovered from a SCSI BUS issue. The issue may still be present on the BUS. Check cables, termination, termpower, LVDS operation, etc
code....
View 2 Replies
View Related
Mar 13, 2011
I'm getting a timeout error from NetworkManager when attempting to connect to my router/firewall.
Excerpt from /var/log/messages attached.
View 1 Replies
View Related
Sep 1, 2010
Since yesterday we need to have oauth authentication to login to Twitter. I have compiled qoauth and then qwit and choqok but I'm not able to use both. I'm having issues with oauth I could'n solve. Qwit gives this message "Error while trying OAuth!" and Choqok "Authorization Error: Timeout on server".
View 11 Replies
View Related
