CentOS 5 :: Configuring Syslog-ng 3.0.3 With 5.3
Oct 5, 2009
I installed syslog-ng-3.0.3-1.rhel5.i386.rpm and at first blush it appears to be working fine to /var/log/messages. However it doesn't seem to be doing any other ancillary logging as defined in syslog-ng.conf (I've had to mod /etc/init.d/syslog-ng to look in /etc). e.g.
destination d_auth { file("/var/log/secure"); };
filter f_filter3 { facility(authpriv); };
log { source(s_sys); filter(f_filter3); destination(d_auth); };
I'm using a syslog-ng.conf which has served me well in the past (v1.6.9 on fedora).
View 1 Replies
ADVERTISEMENT
Jan 17, 2011
configure syslog server on ubuntu now i want to export logs of windows and ubuntu desktop to the syslog server
View 6 Replies
View Related
Nov 12, 2009
I'm having trouble getting my pix firewall to log to syslog server. Here are the steps I took:
1) Added the following line to /etc/sysconfig/syslog:
SYSLOG_OPTIONS "-m 0 -r514"
**for some reason, without the 514, syslog doesn't listen
[code]....
View 2 Replies
View Related
May 5, 2009
trying to replace syslog with syslog-ng. When I:
yum erase syslog,
wants to remove everything else that (presumably) has syslog as a dependency. how do I replace the dependency on syslog with a dependency on syslog-ng?
View 3 Replies
View Related
Dec 11, 2010
I am looking for an open source syslog server which accumulate the each and every log of Windows, Solaris, Linux and network devices. Currently I am using Syslog-ng which is not fulfiling my requirement in Windows clients, as I need the logs of every action which user performed after logon.
View 2 Replies
View Related
Jun 1, 2011
I tried to install Syslog-ng-3.2.4 in Centos 5.6,when i need to start the deamon syslog-ng =>Failure and i have this message:
Code: [root@RelaisXXX etc]# service syslog-ng start Starting syslog-ng: Your configuration file uses an obsoleted keyword, please up Your configuration file uses an obsoleted keyword, please update your configurat
Error creating persistent state file; filename='/usr/local/var/syslog-ng.persist Starting Kernel Logger [FAILED]:
View 18 Replies
View Related
Jan 11, 2009
I open "man vsftpd.conf", it says syslog_enable If enabled, then any log output which would have gone o /var/log/vsftpd.log goes to the system log instead. Logging is done under the FTPD facility. Default: NO So I add "syslog_enable=YES" to the /etc/vsftpd.conf, and add "ftpd.* /var/log/ftplog" into /etc/syslog.conf. But there is no log infomation in the ftplog file.
View 7 Replies
View Related
Nov 20, 2009
how to configure syslog server in centos?
View 3 Replies
View Related
Aug 7, 2011
I have a dual-processor x86 box with CentOS 5 Linux 2.6.18-238.19.1.el5, mysql Ver 14.12 Distrib 5.0.77, and tons of storage space. I want to run a syslog solution on this box for a SOHO infrastructure. We've got routers, switches, Windows servers, other Linux boxes, etc. I've looked at syslog-ng, but it seems rather overkill, but I like the idea of storing logs in a MySql database. Is there anything I can yum install?
View 2 Replies
View Related
Aug 21, 2009
I am thinking about installing rsyslog using yum, but I only want to try it out first and don't want to create conflicts and problems that will be hard to revert. When I ask yum on CentOS 5 about rsyslog, I get this (note much older version - it's too bad that even the latest STABLE rsyslog isn't in the repository):
[Code]....
View 3 Replies
View Related
Oct 12, 2009
I've just configured my Linksys RVS-4000 router to syslog messages to remote syslogd server (i.e. my CentOS5 machine). Redirecting messages was easy, but now I'm having difficulties to redirect those same messages received from Linksys to a separate log file. By default, all these messages are logged to /var/log/messages, and after browsing manual pages for syslog, syslog.conf, and syslogd, came to suspect that what I want isn't possible.
View 1 Replies
View Related
May 13, 2010
I installed syslog-ng so I can receive remote logs. this is working however since I disabled syslog on my syslog-ng server I am not logging in /var/log/messages cron and some others.locally)I know this is because my syslog-ng.conf only references remote and not local.How can I edit the syslog-ng.conf file so that I can receive remote and local? I tried this however when adding in portions of the default config, I only receive local and not remote logs anymore. I am forwarding my config.
# syslog-ng configuration file.
#
# This should behave pretty much like the original syslog on RedHat. But
[code]....
View 2 Replies
View Related
Mar 1, 2010
OS CentOS 5.4 I have a DNS server that is logging all named and dns requests to the chrooted named directory. By default named logs to /var/log/messages but I want to isolate all the dns queries and requests to separate files. I know I can add entries to /etc/syslog.conf to "roll" the logs and logrotate should pick them up but fuzzy as to the syntax. I don't know what "tag" to use in the first fieild. for example
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none/var/log/messages
Here is the logging section of my named.conf
# pwd
# /var/named/chroot/etc
logging
{
[code]....
View 5 Replies
View Related
Oct 7, 2010
I noticed in my system that my root partition is getting full. I found a lot of old compacted syslogfiles. Had a look at etc/sysconfig editor eg cron but could not find a setting which allows to delete files older than a month. Where and how could I influence this ? I deleted manually all syslog files older than a month. Approx 6GB
View 9 Replies
View Related
Jul 10, 2009
I have to servers online, both are connected to a virtual rack and both have public inet IPs. The thing is that I want the communication between the servers to be handled locally. This is my ifconfig from one of my servers,
eth0 Link encap:Ethernet HWaddr x:x:x:x:x:x
inet addr:x.x.x.x Bcast:x.x.x.x Mask:255.255.255.248
inet6 addr: fe80::21d:9ff:fef1:e665/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:114342 errors:0 dropped:0 overruns:0 frame:0
[Code]...
View 1 Replies
View Related
Aug 11, 2010
where i can learn configuring DNS and apache
View 1 Replies
View Related
May 7, 2010
I have installed CentOS in multi-boot set up.when i am trying internet thru win7,its working fine but when i am tryin to connect using CentOs,its not working.I have tried and changed the mac address to the one that is on windows(this worked fine with ubuntu) but the issue remains in CentOS.
View 8 Replies
View Related
Mar 22, 2010
Recently my motherboard went out, I replaced it and booted centos 5. All went well except sound, video tuners and netoworking. The sound I re-configured, and have gotten tuners working but I am running into trouble with the new network card. The networking setup is;
DSL wireless router/modem IP 192.168.0.1 connected to XP computer through WIFI IP 192.168.0.3. all set to subnetmask 255.255.255.0 and with DNS servers 192.168.0.1 and 205.171.3.25 the XP computer is the only one that supports my wifi card. On wired LAN I share that connection to 4 devices. 3/4 work well, my cent os 5 box will not connect. here are the lan settings:
win xp: IP 192.168.0.60 255.255.255.0
mac 8.6: IP 192.168.0.34 255.255.255.0
blueray: IP 192.168.0.65 255.255.255.0
[code]....
View 9 Replies
View Related
Jul 31, 2011
I installed the Centos 5.5 on a WM instance. Run out of space after doing the updates. It is very difficult to keep re-partitioning /
I tried to install a new instance but it doesn't let me configure the disc and it just goes and install the OS.
How can I use the good old installation options etc?
What happened to control? This became a control nightmare.
View 2 Replies
View Related
Feb 10, 2009
Am using Icefaces1.7.2 in tomcat5.5.23 in Centos5( jdk 1.6.06 and jre 6u11 and no X window system in my server ).. Am getting the error(java.lang.Error: Probable fatal error: No fonts found) when am using the functions getFontMetrics() and drawString() methods in my Captcha Image Generation programs. I am only using the fonts that me retrieved using ge.getAllFonts() ( i.e., the fonts available in the system ).
View 6 Replies
View Related
May 13, 2009
I've got a server with several different virtual hosts on them, e.g. host1.com, host2.com, host3.com.
Is there a way I can set up an email alias just for an individual domain?
e.g. I want to set up help@host2.com, but not to have help@host1.com or help@host3.com.
I can't see how to do this in the /etc/aliases file...
View 2 Replies
View Related
Jan 24, 2011
i've got a select based application that wants to support a large number of mostly idle connections. the code is java and works on windows, suse enterprise linux, mac os x. it does not work on centos 5.5 (32-bit, 2.6.18 kernel, 1G of memory).
i've read and followed the directions in various articles about tuning linux for large numbers of connections (including the C10K problem), and gotten the number of sockets up to 3200.
these didn't make any apparent difference:
[URL]
on windows, i can get up to around 78,000.
on suse enterprise linux (a few years ago), i got up to 90,000. that's where i got bored and stopped.
on my mac laptop with os x (snow leopard), i got up to 10,500.
i have used ulimit -n 10240
my current goal is 10k sockets.
the test is that i'm opening one socket at a time until it fails. when it fails, many of the sockets which have already been opened also fail, in one giant cascade. sounds like a buffer / memory problem.
each group of 64 sockets gets a thread to manage select calls for them. thus i'm only using around 61 threads total when it fails.
View 3 Replies
View Related
Mar 31, 2011
configuring DHCP server with two NICs. I need DHCP server with 2 NICs:
eth1 - 192.168.103.11
eth2 - 192.168.123.11
The client also has two NICs and suppose to receive ip addresses eth1 from 192.168.103.0 and eth2 from 192.168.123.0 Here is the dhcpd.conf from dhcp server:
ddns-update-style interim;
authoritative;
ignore client-updates;
[code]....
View 2 Replies
View Related
Jun 30, 2011
I've installed CentOS 5.6 to my laptop, primarily to use some simulation programs. With much help of google I'm getting my hardware and software to work quite well, but I still have some troubles.My first problem is my Synaptics-Touchpad. It is extremely sensitive and I am not able to scroll. Is there any application which allows me to configure it properly? Before CentOS, I've tried openSUSE 11.4, where there was an application especially for configuring synaptics touchpad (dont't remember the name though). In general, the "feeling" of the touchpad was way much better under openSUSE, but I can't define that properly. I have a bluetooth mouse (Dicota Blue Light) conntected to my laptop, which is working fine except for the scroll wheel, which doesn't work at all. How can I activate it?
View 3 Replies
View Related
Jan 17, 2011
full steps of configuring mail server in CentOS 5.5.
View 4 Replies
View Related
Nov 26, 2009
I am using Centos 5.4 on an Intel DG451D Main Board. Two SATA drives in RAID1 mode via the main board's built in AHCI controller. It seems to work just fine but I would like to be able to monitor the state of my drives and controller, especially during a re-build and make configuration changes etc if possible, so new drives can be added etc from within the OS. Is there a way to do this within Centos or am I stuck with using just the BIOS configuration system? Apologies if this is a stupid question - I am pretty new to this and have spent several hours trying to find a solution to my question but to no avail.
View 1 Replies
View Related
Feb 16, 2010
I've search for info on configuring ndiswrapper for the BCM4318 Wireless card. All I've been able to find is information on Ubuntu and Debian, which don't seem to use the same methods for configuration. Has anyone configured ndiswrapper for this or any wireless card on CentOS 5? I've installed 5.4.
View 7 Replies
View Related
Nov 10, 2010
i have linux server application based on centos 5 that run httpd daemon from /usr/local/pf/conf/httpd.conf which is generated from the /usr/local/pf/conf/templates/httpd.conf.apache22 file
the problem is every time i run my linux server application i am not able to access phpmyadmin unless i stop my linux server application which is stop it httpd daemon then start "service httpd start"
i have been told by forum moderator to create an alias for my phpmyadmin in Virtual Host but it stil dont work, i am not able access my phpmyadmin site
this is what i have done to solve this problem
- open /usr/local/pf/conf/templates/httpd.conf.apache22 file then look for <VirtualHost *:%%admin_port%%>
- add Alias /phpmyadmin "/usr/share/phpmyadmin" (Failed)
- add Alias /phpmyadmin /usr/share/phpmyadmin (Failed)
- add Alias /phpmyadmin "/usr/share/phpmyadmin/" (Failed)
[Code]....
NB : my phpmyadmin is install on /usr/share/phpmyadmin with /etc/httpd/conf.d/phpmyadmin.conf as phpmyadmin configuration file
why i still cant open my phpmyadmin site ? or why i cant run phpmyadmin together with my linux server application because it use the same daemon (httpd daemon)
View 1 Replies
View Related
Jul 31, 2009
On a new install of CentOS 5.3 I am trying to make the Logitech MX Revolution mouse work (I did actually succeed in configuring it by BTNX on my previous machine, but can't make btnx work now...). I am following the instructions from [url] works. However, when installing the xmacro package it complains about a missing library: libstdc++.so.6(GLIBCXX_3.4.9)(64bit). The library is available in Fedora but not in CentOS. I guess installing the Fedora library is unwise...?
Does anyone know how to make xmacro work?
Also, in xorg.conf it seems (from other posts etc) using the evdev driver for the mouse would be advisable.
However, when I change from [driver "mouse"] to [driver "evdev"] X cannot start. In the xorg.conf logfile (/var/log/Xorg.0.log) it seems like the evdev driver is not compiled:
I don't really understand the error, but it seems to me, that the evdev driver is not compiled... The evdev driver should, though, be installed (through the package xorg-x11-drv-evdev-1.0.0.5-3.el5.x86_64)
If this is right, how, then do I compile the evdev driver?
View 2 Replies
View Related
Apr 7, 2011
If I have Redhat 5 Enterprise workstation, how can I configure it to point to Centos 5 so I can receive updates and fixes through Centos rather than paying for Redhat support ? I heard this can be done, but wasn't sure what the steps are in terms of configuring Redhat
View 4 Replies
View Related
