A couple of months ago I (naively) installed Python 2.6.2 to my system without using an RPM. Then recently I tried to run the Display panel (/usr/bin/system-config-display) and it never opened.I then used it from the command line and after realizing it was a Python problem I spent some time trying to eliminate the python conflict by removing 2.6 and reinstalling all the python related RPMs from URL..Searching online one of the things I have found is to recompile python with UCS4 support though that seems to go against the idea of using an rpm as I understand it and I would assume it has been compiled as needed for CentOS.
I did not have any /etc/X11/xorg.conf, so I read on these forums that system-config-display would create one for me. I ran system-config-display and it created an xorg.conf. But now my display is all messed up!! So, I deleted the xorg.conf and nothing changed. Why on earth would the display still be messed up if I deleted the file that was causing it?? Does system-config-display change somethign else?
I am using Ubuntu 10.04 Lucid Lynx and I am facing a strange issue with the top panel. Sometimes it looks weird as shown in attached image.In the image you can see white blocks .. after date the username gets clumsy.Until and unless I restart my system the behaviour cannot be reset. Is there any workaround or solution for this issue ??
I've upgraded from 10.10 to 11.04, and now I'm experiencing some problems with the displaying of panels and icons that I'm hoping someone can help me to fix.
Situation: Running 11.04 in latest virtualbox (4.06, with guest additions installed) on a macbook pro running snow leopard (10.6.7). I'm in gnome classic (no effects) because I'm not yet used to gnome 3 and compiz doesn't run all that well for me in this virtualization set-up. But the problem, described below, is consistent from gnome 3 to classic (with effects) to classic (without effects).
Problem: When I first log in after a reboot, everything looks great in the default settings (ambiance theme, I think), but after ~ 15 seconds, the panels and icons revert to an odd looking theme that I don't particularly care for. And trying to change the settings in the "Appearance" preferences is of no help, i.e., I can change the themes, but the panels and icons remain in a stock, old-school gnome-ish theme.
I've been experimenting with the system and as these things go I've done something and I can't undo it through lack of understanding. I've managed to disable the display of minimised windows in the panel at the bottom of the screen. To compensate I'm using a Widget which allows me to get back to the window as I need it. But I'd prefer to be able to simply click on the panel.
On fedora 12, I could make my EEE PC 1024x600 display pannable by using xrandr:xrandr --output LVDS1 --mode 1024x600 --panning 1024x768...Everything worked. After upgrading to Fedora 13, the bottom panel bar is in the old position, and over any windows that extend below line 600.Is there something I need to do to get the panel bar to go to the bottom of the screen like it did in Fedora 12?
I remember this was discussed some time ago but I cannot find the thread any more. I was just wondering if others are still seeing the same problem . I've had this all through 4.4.3 and now with 4.4.4. For some reason if only the logout or lock button is selected and placed on the far right of the panel then part of the button is chopped off. This only happens with the panel locked. If both buttons are selected then they display correctly. I also notice that when only one button is selected that it's size is slightly smaller than when both are selected. Also it only seems to be the logout/lock widget that has this problem.
I have just updated to karmic. For some odd reason, the time/date indicator on the top panel now spreads the data over two lines, rather than placing them side by side. There doesn't seem to be any option in the preferences program to control this.
This means that the panel cannot be reduced below a two line minimum. Not only have I lost desktop space, but the panel icons have expanded to suit the new thicker panel.
I'm unable to display the panel icon for me-tv in unity with ubuntu 11.04. I've tried editing the whitelist in dconf-editor. Any other ideas from anyone? A Google search has also revealed nothing.
I have a weird problem on 10.04 where my nm-applet icon wont show on the panel. Only when there are no known wireless AP around. if there is a previously connected wireless in the area I will see the icon but if I'm at a new place it just won't show up. nm-applet is still running, I tried to kill and restart it but the icon still doesn't show .
I upgraded to FC10 from FC8 and my Gnome-panel no longer spans both screens in my dual monitor configuration. This worked fine in FC8, and I can't seem to figure out how to make this config work in FC10.
I've tried Xinerama and Twinview, and various configurations in xorg.conf, and cannot seem to make it happen.
How to make both my panels (top and bottom) go across both screens?
I continually get times where an applet on the top panel breaks, such as the Indicator Session Applet, where it doesn't show the applet, and is mimicking the clocks display, but frozen, and no functionality. This is seen in the photo, where you can clearly see the right time and applet as 5:11 and the frozen one as 4:49.
i didnt find a solution to a display problem im having. my server mobo is an asus k8n-dre with built in video. after the install(using built in video) the screen dosnt display fully as in black sections on the left and top of the screen. from the searching i did i found something about an "xrandr" command that would let me change the video settings but it didnt do anything with the black areas when i tried it. i also have a nvidia geforce 9500gt video card so i changed the jumper to boot from it and tried again. the black sections are still there but the centos display covers much more of the screen now. theres still about a third of an inch gap on the left hand side and about 1/4 of an inch on the top. ive also tried updating the software to see if it may be a driver issue but no luck. anyone know how or if it can fit to full sceen? the screen displays up to 1440x900 if im not mistaken but with the built in video it gave me lots of display options including the 1440x900. after changing to the nvidia card it only shows 800x600 and 640x480.
I recently decided to try KDE4 and would like the change the clock on the panel to display 12 hour format and not the default 24hour format but i can not find where to change this option currently the clock looks like the attached picture. Gnome has this option and I would like to see it in KDE if it exists in the default clock. I am willing to replace the default KDE clock with a seperate widget if one exists for this.
I have been using Ubuntu 10.04 for some time but as its no longer supported, I need to consider my options. One of the things I really liked was the panel shortcuts to Applications, Places and System.
I am considering installing latest Debian but see that "System" is not included in the panel. So my question is can this be added?
I've just installed the xubuntu GUI on my ubuntu server and by default I only see Applications and Places on my top panel. There is no option to add the system menu under "Add new items", so I'm curious as to how to go about it.
On a side note, is there a way I can have the system boot into the original command prompt by default, and how can I enable and disable the GUI at my convenience?
I usually have a system indicator and desktop switcher (to see which desktop I am working on) in my panel (in previous ubuntu releases). I really like the unity interface of the 11.04 betta but I want to have these applet in my panel is there a way to have it? since there is no option which says add to panel in 11.04.
I removed my main panel this morning, which meant I lost all the launcher icons like the Terminal, places, system, etc. I right-clicked and selected New Panel, but when I select Add to Panel, it doesn't offer me the ability to put these items back on. The list included Clock, Weather, Garbage and Desktop, but doesn't include the others. I can't relaunch the Terminal. Any suggestions would be greatly appreciated, as without terminal or application access, obviously the my system functionality is pretty limited.
I don't know if this is the result of an upgrade, software conflict or I did something I shouldn't have without even noticing. I was able to "Add" the main GNOME menu back by right clicking on the menu, etc. Now, Places and System are sub-menus of the main system menu.
I've rented a small virtual server with some friend for hosting our sites. we had lxadmin panel that is discontinued. Is there a free web-based panel for centos 5.3 that can be installed from a reliable repository without compiling (the vserver is too short on ram for such an operation).
I have rented a VPS based on CentOS5 (naturally) from Burst.net who use a front panel by vePortal.I can't access it by its own shell and am told that CentOS5 does not come with FTP or Putty access. THey must be installed by me.(I'm not sure of the support competence at the provider, so I've come to the source)I think/hope that such basics would be part of the primary OSystem?How would I install programs onto a system with no such access?
I installed HP Linux Imaging and Printing system yesterday and since then my panels are missing, is there a way to access the config files to correct this?
