I installed CentOS and CVS on it. I am having problem while accessing from WinCVS from XP machine "cvs [login aborted]: connect to 192.168.1.123:2401 failed: A socket operation was attempted to an unreachable host."
I am able to login to Linux machine using Putty. Also CVS checkin and checkout works fine from within the Linux machine. I searched 1/2 day in net but couldn't find the exact solution.
I am trying to access a cvs repository(on Linux machine) from windows machine(client) using wincvs and tortoisecvs. Though i have been able to checkout all the project, but..
1)Not able to open any of the checked-out file on my windows client's machine.
2)Also it doesn't let me to commit any newly added file on the repository(Error: root is not allowed to commit files).All the permission were set to 777 and i created a new user exclusively for cvs too.The error is still the same i.e. root is not allowed to commit files Are these two points interrelated or am i making some stupid mistake.Can anyone put some light on it.
I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
View 5 Replies View RelatedI have two Centos 5 servers one running Asterisk with PHP installed and another sever running as a MySql Database server, at the moment when I try run simple script to see if I can connect to the remote server I get the following error.Quote:Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
View 2 Replies View RelatedPl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies View Relatedwould like to connect my ZTE AC1710 usb modem to my computer. I use an Acer Aspire 5610Z.
View 1 Replies View RelatedI have recently installed CentOS 5.3 in my system. I needed some help with the wireless configuration. Actually i have configured it and it shows the wireless name but it doesnt connect to it. in solving the issue.In the /var/log/messages , the following error appears :
Apr 24 20:46:51 localhost NetworkManager: <info> Activation (wlan0) starting connection 'OMWLAM'
Apr 24 20:46:51 localhost NetworkManager: <info> (wlan0): device state change: 3 -> 4
[code]....
every time I try to connect to the ftp server I setup i am recieving this error Response:*** buffer overflow detected ***: /usr/sbin/vsftpd terminated Error:Could not connect to server
View 1 Replies View Related$mysqladmin -u root
just prints out a long option list and quits... sometimes it tells me that I cannot connect to localhost.... I've tried --no_defaults,--socket= etc. as per the MySQL manual.
MySQL 5.0.45 I know the server is running This is a new install and i'm su'd to mysql in mysql homedir. I'm sshing into DV Centos 5.
i bought a vps last week. I wanna if it is possible that the only connection on my computer will be to the vps(i wont be able to connect directly to the internet for example) and if i want to connect to the internet it will be through the vps . i wanna use ssh and especially iptables(and not the proxy of the browser)
View 1 Replies View RelatedI need to configure Point to point tunnel protocol (PPTP) vpn in centos.
In Windows XP:
We can able to configure PPTP Vpn like this.
" 1. Open the Windows Control Panel.
2. Open the Network Connections item in Control Panel. A list of existing dial-up and LAN connections will appear.
3. Choose the 'Create a new connection' item from the left-hand side of the window. The Windows XP New Connection Wizard will appear on the screen.
4. First click Next to begin the wizard, then choose the 'Connect to the network at my workplace' item from the list and click Next.
5. On the Network Connection page of the wizard, choose the 'Virtual Private Network connection' option and click Next.
6. Enter a name for the new VPN connection in the 'Company Name' field and click Next. The name chosen need not match the name of an actual business.
7. Choose an option on the 'Public Network' screen and click Next. The default option, 'Automatically dial this initial connection' can be used if the VPN connection will always be initiated when the computer is not already connected to the Internet. Otherwise, choose the 'Do not dial the initial connection' option. This option requires that the public Internet connection be established first, before this new VPN connection will be initiated.
8. Enter the name or IP address of the VPN remote access server to connect to, and click Next. Company network administrators will provide this information.
9. Choose an option on the "Connection Availability" screen and click Next. The default option, 'My Use Only,' ensures that Windows will make this new connection available only to the currently logged on user. Otherwise, choose the 'Anyone's use' option.
10. Click Finish to complete the wizard. The new VPN connection information has been saved."
But in Centos how we can able to configure PPTP VPN for this we need to install any package. I got all the vpn access credentials from my office to work from home, but i cant able to join in my office network. because of this prob.
iam using : CentOS release 5.4 (Final) versing os
Trying to get a handle on xen. I have installed Centos 5.3 and I have created one xen guest using default 192 address. I can access this guest no problem from the xen host/server but how do I setup a bridged (I assume) xen guest so it can be connected from any network within my domain, The xm host is network is 10.32.161.0
View 1 Replies View RelatedI just installed swat, but I'm unable to connect. I read the "man swat" file and it says that I have to modify the /etc/inet.d/swat file, which in my install does not exist; however, I found the /etc/xinetd.d/swat file, and I edited setting disable=no, and also setting only_host=to my ip address. After that I restarted the server "service xinetd restart" because "service inetd restart" doesn't work, so I checked if the port was listening with netstat -l | grep 901. Again no service is listening on that port..
View 1 Replies View RelatedI'm using CentOS 5.4. I want to set-up a PPTP connection (I'm the client). I installed the NM pptp plugin from EPEL's repository. I have configured my PPTP connection in the NetworkManager applet but now I don't know how to connect to the server, I mean, there's nothing like 'Connect now'.
View 1 Replies View RelatedI've problems to connect a remote PC with SSH. I got always the error message: Permission denied (publickey,gssapi-with-mic).Here with command line:
advantech@headnode:~$ ssh root@172.21.35.121
Permission denied (publickey,gssapi-with-mic).
I am usually the last one to post on forums, but I can't for the life of me get FreeNX working on my CentOS box. I have also read many posts, many how-to's, many troubleshooting guides, and absolutely nothing is working for me. It's Crazy. First of all, I've installed FreeNX before, with little to no trouble. I am not completely green at the linux command line, but I am still no expert. I'm hoping one of you guru's out there can lend me a bit of a hand.
Here goes, I've installed FreeNX onto my CentOS 5.4 dedicated box, using the how-to [URL].. I've done everything, letter by letter, on the how-to. (Installed CentOS, configured sshd_config, added users in AllowUsers, created nx user, imported keys.. etc) At this point, I could not connect to my box, with the error message:
NX> 203 NXSSH running with pid: 336
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
[Code]...
I keep getting this email
httpd failed @ Sat Mar 13 15:26:03 2010. A restart was attempted automagically. Service Check Method: [tcp connect]
Failure Reason: Unable to connect to port 80
Is there anyone who know why this would Happen?
I tried connecting my laptop configured with centos to a wired net connection but i was unable to do so.
when trying to connect i got this
Determining ip address for eth0.... failed
My config :
Dell PowerEdge 2900III
16Gb RAM
2 arrays RAID1 (2*(2*500Gb))
CentOS5.5
VMWare 2.0.2 (with workaround of downgrade glibc to CentOS5.3)
Since the upgrade from CentOS5.4 to CentOS5.5, it seems the sshd is crashing every other day.I can access to the VMWare webserver, but no way to connect through ssh port 22.The only "workaround" is a hard reboot of the server, and with luck, I can access to the server through ssh.I checked /var/log/secure, it looks like time to time when the server start, it does not start the sshd service, there is no entry at all for the time the server started up. For instance today, the server has been started early this morning, but the first entry was found after a hard reboot this evening : Jun 3 18:19:14 hercules sshd[3617]: Server listening on 0.0.0.0 port 22.
when i type iwlist wlan0 scan it gives a load of networks and mine but how do i connect to it?
View 16 Replies View RelatedI just succesfully installed Centos 5.5 64bit with following package:
- httpd 2.2.3-43
- php-mysql 5.1.6-27
- mysql 5.0.77-4
and all these packages are running ok.
My question is how do i connect from Centos to another MSSQL server using PHP? I had read several article but cannot find the best way to achieve this because most of the instruction seems to be quite complicated. I found somewhere in this forum that all it need just this simple command: "yum --enablerepo=extras install php-mssql freetds". While others article said that i need to install "FreeTDS" and some ODBC driver. I'm a little bit curious since most of that article are using an older version of Centos and PHP.
i have centos installed in a VMWare . i have a windows server 2008 in a vmware too. i want connect centos (client) with windows (server), using dns in windows server. how to be this?
View 2 Replies View RelatedI am attempting to connect a CentOS VMWare VM to a networked Brother HL5170DN printer. The printer is located at 192.168.0.101. It is available and I can connect to it with various Ubuntu and Windoze VMs.
I have searched for instructions on how to do this and it SEEMS rather simple. However, it does not work. Here is what I have done:
System; Administration; Printing to launch the printer configuration wizard
supply root password New Printer Provide printer name, description etc. Select Connection - LPD/LPR Host or Printer Hostname - 192.168.0.101 supply a printer name again select Brother HL5170DN BR-Scripts3 from the footmatic database complete creating the printer
The printer appears as a local printer, however, I cannot print a test page. Nothing happens when I click the button to print a test page. I can ping the printer by IP address. So I deleted the printer and tried again.
At the screen which asks for Hostname and Printername I entered the printer's IP address in Hostname as I had done before. I then clicked the Probe button. At this point Printer configuration freezes and I have to do a force quit.
I just tried the same thing on a physical CentOS 5.6 box - just in case the problem was a VMWare thing. Same symptoms. Probe freezes the Printer configuration program. I then recalled that the printer uses port 9100. I opened 9100 on the firewall (I think) but no improvement. I temporarily disabled the firewall and went throug the proces. I now have the printer defined at "socket://192.168.0.101:9100" and recognized as "Brother HL-5170DN BR-Script3"
I still cannot print a test page. I tried to print from gedit and it shows the printer with 1 job in the queue. The gedit print bumped that to 2 jobs in the "printing" state. Looks like I am communicating with the printer. Just not printing.
I have installed CENTOS 5.0 .. IM new to this centos linux..
-->regarding the remote connection
how can i connect the server through remote from windows 7 ..graphical interface ?
how to install lamp or apache , php , mysql
can u guys provide me any link or book for as a beginner for centos ?.
My centos server was startup to command line mode (console), and I install desktop on that server. after that I set up vncserver from putty, and connect to it using vncviewer, but I can not get into the desktop environment in installed but xwindow desktop instead, and if I try to "startx" in the vncviewer, error occurs, what's wrong ?
View 1 Replies View RelatedI have a server in my house with webmin and virtualmin installed et i made a mistake.Ive created a virual server and ive change the lan ip adresse. 192.168.2.30 ive change it for 192.168.2.31.Now of course nothing work. Im not able to connect via ssh via another computer.So, on the server i write ifconfig and it tell me the adresse is 127.0.0.1 and no more adresse like 192.168.x.x.
View 2 Replies View Relatedway to connect my CentOS server to my Windows domain.
View 2 Replies View Relatedphp can't connect mysql by 'localhost' but can connect by IP address:
[Code]...
Any ideas why i cant connect to the internet with this server.
View 2 Replies View RelatedI installed Centos 5.3 with package standard of the MYSQL, configured this the same twirling in such a way localhost as in one it schemes with windows VISTA, to put I have others 4 you scheme with windows XP that I do not obtain to have access in the MYSQL. What I have to make pra these you scheme with XP to have access?
View 5 Replies View Related