Software :: CD-R Test Suite For CentOS 4/5?
Jan 28, 2010
We've been having lots of problems with burning CD-Rs on our Dell PowerEdge and T300 servers. We've had the CD recorders replaced frequently, and that often fixes the problem, but then we'll start having problems again. Usually it is the CD refuses to write, or it gets written but can't be read. Often, if I re-run the burn with the same blank CD, it will be fine.
I'd like to test some CD-Rs and compare error rates so I can recommend what CD-R media we should be using. Currently we are using Memorex and Verbatim CD-Rs. Is there a good cd recording/testing suite for Linux that I could use to do this?
View 1 Replies
ADVERTISEMENT
Sep 9, 2010
I downloaded the deb from the Phoronix site, installed it, and found out there were missing dependencies: php5-cli php5-gd.
These took up about 10.5 MB. Next I ran 'phoronix-test-suite list-tests', agreed to the license, then ran it with 'gui', and found out that I needed to load the 'PHP GTK' module. There is no Debian package ( at least no combination of gtk and php in description or name returned any results ), so I downloaded the source and read the instructions in INSTALL.
When running buildconf, it died due to 'phpize' not being found. This binary only comes with the php5-dev package, another 12 MB. After installing that package, buildconf dies with
Configuring for:
View 1 Replies
View Related
Jul 17, 2011
I have just installed a two server cluster with ricci luci and conga on centos 5.6 32bit , both servers are vmware guests and have a shared storage disk connected to them both
with a GFS2 file system on them + fencing agents configured to work with VMware Vcenter.
(this is supported by vmware and works great on 4 other centos clusters i have been runing for 4 monthes with no CLVMD).
In this setup i used for the first time CLVMD as recommnded by RedHat so i could have the flexablitly of LVM under the GFS2 file system but , i have been getting some Strange problem with it , some times after a developer has done some IO heavy task like unziping a file or a simple TAR the load goes to 10 - 15 and no task can be killed , trying to reboot the server hangs.
After hard shutting the server every thing works ok until the next time some one does the same IO work as before.
View 5 Replies
View Related
May 6, 2009
i am using the redhat cluster suite (luci and ricci) on my centos 5.3. i have 2 nodes in a cluster. when i poweroff the first node on wich a vm service is running, the service switchtes to node2. so far, so good :) but when i restart node1 the service is not failback to node1! i have created a failover domain with both nodes and priorized whre node1 has prio1 and node2 has prio2.
View 4 Replies
View Related
Oct 22, 2009
This is my first post, and i have a question with the fence software for VMWare ESXi. The fence_vmware agent only works with ESX, and redhat (in you GIT repository) has submited a new agent called fence_vmware_ng that claims to work with ESXi. But the problem is that they do not specify the version that works with that. Anybody has test the fence_vmware_ng agent for VMWare ESXi 4.0 ?, i follow the instructions here: [URL]...and i can install the software, the API from VMWARE site, etc, but in the moment when i run the agent nothing happen, The agent connects to server, i see in logs, but the off-reboot-on operations not works. Only works status operations, that return the state of a virtual machine. I have CentOS 5.3 (fully today updated) with RHCS.
View 6 Replies
View Related
May 18, 2010
I have made a cluster between two server.In luci I can see that my cluster is green and the two nodes to.I have make an IP resource and associate it to a service : green : I can relocate the service from a node to the other one and the IP appears in the list of IP addresses The problem is that I have made the same in order to configure tomcat and postgresql and it does not work...I put my configuration only for ip and tomcat:
My host configuration:
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
10.0.0.1 server1.domain.com server1
10.0.0.2 server2.domain.com server2
View 7 Replies
View Related
May 18, 2010
I have made a cluster between two server.
In luci I can see that my cluster is green and the two nodes to.
I have make an IP resource and associate it to a service : green : I can relocate the service from a node to the other one and the IP appears in the list of IP addresses
The problem is that I have made the same in order to configure tomcat and postgresql and it does not work...
I put my configuration only for ip and tomcat:
My host configuration code...
View 4 Replies
View Related
Jul 2, 2010
i opened up my browser to surf the web and a page popped up i had never seen before.Apache 2 Test page powered by centos. Any address i put into my firefox browser won't come up and i'm stuck on this test page and,i can't locate it on my computer to remove it.How do i get rid of it and more importantly how did it get on my computer in the first place?
View 10 Replies
View Related
Oct 2, 2010
I am trying to run though the qmailrocks setup on a centos 5.5 and I am running into an issue when trying to telnet to port 25:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
Everything else seems to be working (telnet to 110), and I turned off the firewall entirely, but I still cannot telnet to port 25. I also get a blank error within squirrelmail when attempting to send mail out (ERROR:Message not sent. Server replied: ). I apologize for not going directly to the qmailrocks forum, but they are currently closed down (due to lack of funds). I also am a newbie, so I apologize for the lack of needed information. If anyone has any ideas, please let me know what information you would need.
View 2 Replies
View Related
Apr 12, 2009
I just tried this and it only installed PHP 5.1.6
yum --enablerepo=c5-testing install php
Loading "fastestmirror" plugin
Loading "allowdowngrade" plugin
Loading "priorities" plugin
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirrors.dedipower.com
* updates: mirrors.dedipower.com
* c5-testing: dev.centos.org
* addons: mirrors.dedipower.com
* extras: mirrors.dedipower.com
c5-testing 100% |=========================| 1.9 kB 00:00
primary.sqlite.bz2 100% |=========================| 390 kB 00:01
736 packages excluded due to repository priority protections
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package php.i386 0:5.1.6-23.el5 set to be updated
--> Processing Dependency: php-cli = 5.1.6-23.el5 for package: php
--> Processing Dependency: php-common = 5.1.6-23.el5 for package: php
--> Processing Dependency: php = 5.1.6-20.el5_2.1 for package: php-devel
--> Running transaction check
....
View 11 Replies
View Related
Aug 1, 2009
I am trying to search a tool for testing multicast. Currently, 'yum search multicast' yields nothing. I saw mcsender and mctest in google but they seem not to be supported in CentOS. Do you know any tool that can test multicast?
View 3 Replies
View Related
Dec 20, 2009
I've been trying to install VSFTP on a test box I have at home. Here are the steps that I've done so far: First, I install vsftpd via yum. yum install vsftpd
View 4 Replies
View Related
Apr 11, 2010
Do you have an idea how to test postinstall script without reinstalling the server every time?
View 1 Replies
View Related
Jul 14, 2009
Newbie on the block with Centos 5.3 on a test server and and Ubuntu on a test workstation Note the wiki on VNC for a windows workstation but presume I could do this more easily from "Jaunty" (Ubuntu v 9.04)
View 10 Replies
View Related
Oct 20, 2009
I have Centos 5.3 installed on my pc. I have mysql, PHP and apache server running on my computer too.Is there any way I can test my website on my pc without running any stack ( lampp )?
View 10 Replies
View Related
Apr 8, 2011
I have been battling an issue for a couple of days and I have it down to 2 possibilities. Memory or mobo. A server in the DC is being very sketchy. Sometimes it will boot fine, sometimes it will boot but will not show all the memory, and sometimes it will hang before it even posts. I have replaced just about everything inside the system except for the memory and the mobo.
I would like to test the memory before replacing either because both are a few hundred dollars. The problem is, the memory doesn't log any errors and running a memory test with ubcd doesn't work because it's ecc memory. I thought I remembered hearing that there is a way to run a memory test during a Centos or RHEL installation, but I can't figure out how.
The memory is
DDR2 667 FB-DIMM
and the board is
Tyan S5380
View 3 Replies
View Related
Apr 8, 2009
I have installed Postfix + Amavisd-new, then I am started all services (and configured main.cf and master.cf to use amavis).
The questions are:
1) I am trying to test antivirus scan using eicar test virus
Code:
And the message is successfully delivered to mailbox with mark "CLEAN" in maillog. But I cant see any attachment using
Code:
Where is my mistake?
2) Should I update clam and how I can do it?
3) Is spamassassin enabled by default in amavis (I have started daemon)?
4) Where configuration files of spamassassin is stored?
View 1 Replies
View Related
Mar 15, 2010
I am trying to install mysql 5.1.44..so i downloaded the binary package, i extracted it and then followed the instructions that were in the manual but i keep getting this error when running this command
Code:
scripts/mysql_install_db --basedir=/home/mosty/mysql
the error is
Code:
Installing MySQL system tables...
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
[code]....
You can try to start the mysqld daemon with:
shell> /home/mosty/mysql/bin/mysqld --skip-grant &
and use the command line tool /home/mosty/mysql/bin/mysql to connect to the mysql database and look at the grant tables:
shell> /home/mosty/mysql/bin/mysql -u root mysql
mysql> show tables
View 1 Replies
View Related
Oct 2, 2010
I am trying to run though the qmailrocks setup on a centos 5.5 and I am running into an issue when trying to telnet to port 25:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
Everything else seems to be working (telnet to 110), and I turned off the firewall entirely, but I still cannot telnet to port 25. I also get a blank error within squirrelmail when attempting to send mail out "ERROR: Message not sent.
View 5 Replies
View Related
Jul 22, 2010
I install CentOS5.5 on VMWARE,the system is working properly.I want to test reinstall CentOS5.5 on VMWARE,So,I make a snapshot.My system partition（Manually partition ）is:/(1G),/boot(512M),swap(2G),/usr(30G),/var(10G),/data(20G).Each partition is independent of the ] partition.I reinstall CentOS5.5 by CentOS5.5.ISO.I format / partition,and other partition unchanged.However, the installation process was wrong:
==============================================================
Package Installation
Error running transaction[code]...
How I can reinstall CentOS（Do not lose important data）？Does there have any authoritative description？
View 4 Replies
View Related
Mar 26, 2011
I have created mobility of 20 nodes and vbr traffic using following attached script I executed the file as ns234 vbr.tcl I got the vbr.tr and vbr.nam but I was unable to load the graph using matlab <trgraph> I thought problem with is vbr.tcl script.
View 1 Replies
View Related
Nov 15, 2010
i'm setting up apache on 5.3. i can access the apache test page without a problem from the server via URL... But i can't figure out how to access this page from another computer within the domain (for when i upload my home page.
View 4 Replies
View Related
Mar 11, 2011
For use on a test LAN, ie. security is not an issue, I need to install the most basic FTP server available just so we can share files back and forth between test hosts : launch FTPd, have it share a directory through either "anonymous" or a single, shared login/password?
View 8 Replies
View Related
May 19, 2011
I have just installed ubuntu on my hp laptop and i found that there is no pc suite for Linux.i am using nokia 5310 xpress music phone so i was in little trouble bcoz i need to use dial up connection through my phone .
View 2 Replies
View Related
Jun 13, 2010
I was following [URL] for the cluster setup. But things dint work out. One Doubt to ask "Do I need the services cman, ccsd and rgmanager one at a time on the both machine. I have been running it through script.
View 1 Replies
View Related
Mar 21, 2011
I'm looking for a good solution to get rid of micro$oft exchange... i understand these people literally wrote the kolab connector and now they are offering a collaboration suite.... which seems cool in theory.
has any of you guys had run this? I'll like some real world reviews as i wasn't able to fin anything other than press releases about this software.
View 1 Replies
View Related
Apr 8, 2010
I just loaded Fedora 11 from the Linux Bible live CD. When looking at adding software, I see options for individual Openoffice packages like the word processor or calc. Is there a way to load the whole suite in one step? (I'm new to Fedora)
View 1 Replies
View Related
Jan 27, 2010
I would like the ability to sync my phone with my Ubuntu machine in a similar manner to that of the Nokia PC Suite in Windows. Anyone have any suggestions WRT Linux applications (more specifically Ubuntu, but I am not really that picky) that mimic the functionality of Nokia PC Suite (even partially)? It doesn't need to be specific to Nokia either, any brand of phone is fine as I haven't made my mind up as to what brand I am interested in.
View 6 Replies
View Related
Apr 15, 2011
I am about to attempt to install the mac version of Adobe cs4. Does this sound like a feasible idea if i intend on using an emulator named "PearPC"?
Im am running Ubuntu 64bit version on a dell studio
View 1 Replies
View Related
Jun 23, 2011
I just loaded office 2007 on my admin account, but when I switch users, I am unable to see the Office 2007 suite. The only thing i see is the Note pad under accessories.I have ubuntu 11.04.. Installed the latest version of Wine.I'm sure its a permission settings.
View 5 Replies
View Related
