I have a Ubuntu 10.04 laptop that gets its Internet connection via WIFI using WICD as network manager, and Windows XP desktop with no Internet connection. What I want to do is share my Internet connection from my laptop with my desktop via a Ethernet cable. But i have no idea what to do. How do i go about doing this?
View 3 Replies
I thought to uninstall Gnome Network manager since it was always asking for to connect with wireless internet but it was working fine with wired internet.I uninstalled it and installed wicd. and then for some unknown reasons the internet disappeared.Kindly let me know How can i get back network manager without having internet and make internet work on my computer.I did searched a lot on Ubuntu forums using somone's else computer but no success.So if you let me know how to approach the problem in right manner it shal be great .
View 6 Replies View RelatedRemoved Network Manager (Wicd) - Now Can't Connect To Internet
View 1 Replies View RelatedThese problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.
Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?
[Code]...
I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.
I've read a lot on the internet about various ways of doing this but i've been unsuccessful each time. Basically what i've done is accidently un-installed network-manager because I was having trouble staying connected on my WPA network. The easiest way of reinstalling it I know of is using the CD but I don't have a CD ROM drive and the pen drive I used to install it I no longer have.
I tried using a program called Keryx but you need python installed and from some reason this doesn't come with ubuntu 10.10. I've also downloaded the .deb packages but I still need to download 200kb which is a killer. I've also downloaded it from here too [URL] but the install file makes no sense to me as i'm not a massive linux user. One last thing reinstalling isn't really an option as i've already put a lot of time into setting up this computer.
I am running Ubuntu 10.04 on a PackardBell notebook and have just got an Orange Livebox 2 for broadband connection(after years of dial-up as no adsl in my area).I am trying to connect via WiFi to the Livebox to configure, but neither NetworkManager nor Wicd will connect. NM sees the Livebox but simply fails to connect after trying; Wicd says "Bad password".The WPA2 password I have entered is definitely correct, and I have connected without any problem from an AcerOne under Linpus.I have also tried to connect using Wicd and an ethernet cable, and this doesn't connect either, returning "Connection Failed: Unable to Get IP Address"
View 1 Replies View RelatedHow do I tell the shared connection that it has a static IP and that I dont want a DHCP on the network?Do I have to set up DHCP on the box with the shared connection, even if that box only runs DHCP for a single IP address being the eth0 that is shared?Or can I tell the shared connection that it has a static IP and still allow network manager to run the shared connection?Or should I specify static IP's for all clients and the shared network manager and install say firestarter on the gateway to run the NAT for the eth0 out to eth1.
View 3 Replies View RelatedI recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
I installed Enlightenment into my machine and, in the course of the installation, Network Manager was removed. I now have no internet connection. I've searched and tried a couple of possible solutions here but I cannot get them to work. When I try to use a downloaded deb file Gdebi cannot install it. It seems that if I re-install Network Manager I'll lose a lot of my Enlightenment installation. What I'd like to do is install Wicd. I dual boot with Win 7 so all is not lost. I understand that there's a way to istall Wicd from the command line without an internet connection but I cannot figure out how to do it.
View 3 Replies View RelatedI recently installed fedora 15 on my computer but I have a huge problem. I can connect to my router wirelessly for a couple of minutes only. Afterwards my computer has no Internet connection although the network manager and the icon on the upper bar says that i am still connected. I tried editing the /etc/rc.local and /etc/resolv.conf as mentioned in other posts in here bit no luck so far.
View 6 Replies View RelatedI'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c
[Code]...
I have a laptop ubuntu 9.10 installed and desktop linux mint installed 10. the Wicd would give error bad password and the network manager would just loop and keep asking for key. This worked for me rename the wireless network (ssid) only one word and no caps and it fixed both problems lol!! I guess they don't like multi word {SSid
View 1 Replies View RelatedI had to reinstall WICD to fix another problem, and now it always asks me for my admin password every time I start up.After I enter in the password, it doesn't work.I have tried removing WICD and reinstalling it but that didn't help.I tried searching for a cure to this problem but none of them seemed to have been SOLVED. One post said he solved it but he wasn't clear on HOW he solved it.
View 1 Replies View RelatedI installed 9.10 Karmic 32 bit on a laptop here that has an Atheros 2413 card in it. I could see the network and tried to connect. After 30 seconds of attempting to connect, it simply says disconnected.
Thinking network manager was to blame, I installed WICD and rebooted. I tried to connect to my network, but it came back with unable to get IP address. Okay, fine. So I check my iBook and Ubuntu work laptop both are connected fine. I tried other drivers within the WICD preferences wext, ndiswrapper, madwifi nothing worked. I power cycled the router thinking something might have been borked with my wireless but it's fine.
Running ubuntu 10.10 here, brand new install/machine.USB wireless based on a realtek chipset. I spent a few days trying ndiswrapper, and now have the native driver up and running. I can see the network(s) but can't connect. If I encrypt the network, i get a bad password error from wicd network manager (All encypt. methods- Weps, WPA etc) If I open my wireless up with no encryption, i receive a "can't obtain IP" error.
View 1 Replies View RelatedOpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
I have 2 laptop with opensuse 11.2. One of them is connected to the Internet through a Mobile Connection with a CDMA/EDVO modem on the usb port. I want to share the Internet connection with the other laptop through the WiFi interface of each of them. How should I proceed?
View 3 Replies View RelatedI am running Ubuntu 10.04 on a PackardBell notebook and have just got an Orange Livebox 2 for broadband connection(after years of dial-up as no adsl in my area).
I am trying to connect via WiFi to the Livebox to configure, but neither NetworkManager nor Wicd will connect. NM sees the Livebox but simply fails to connect after trying; Wicd says "Bad password". The WPA2 password I have entered is definitely correct, and I have connected without any problem from an AcerOne under Linpus.
I have also tried to connect using Wicd and an ethernet cable, and this doesn't connect either, returning "Connection Failed: Unable to Get IP Address"
My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?
View 4 Replies View RelatedI've been having 2 issues with my internet connection on ubuntu for as long as I can remember, I've tried updates but they haven't seemed to work so great and am pretty fed up with this. So I have a Netgear wg111t wireless usb dongle which I got working through ndiswrapper. The 2 issues I am having are:
1. After a random period of time my internet just decides to disconnect, the strange thing is the bars at the top still say I'm connected. The only way to get the internet working again is to turn the pc off and on. Another way I have experienced this happening is usually when I'm downloading something off a torrent.
2. After restarting my pc the wifi usb isn't recognised and I can't connect to the internet.
I have installed WICD on Debian . I can now access a new a Network Manager screen, which did not exist before, but it does not display/detect any wireless networks. It is like dead. Before installing WICD I did at least have a wireless WPE encrypted network, which was detected, although it often disconnected for no known reasons. Now even that Network has gone and I can't go on line. Can anybody help here? How can I configure the WICDNetwork Manager to detect an existing network or create a new one? In the latter case, would I have to reconfigure the Router settings to setup/connect to a network in Debian? May be I have to do this, because Tor/Vidalia changes my IP address and so my Network Adapter ( Linksys) can no longer connect to the router.
Also, when trying to follow troubleshooting leads in this connection, the Terminal screen on Debian ( CMD) would often return a PERMISSIONS DENIED message.
I face in getting my wireless connection work. I am able to establish connection with my router and browse router configuration pages successfully. However, trying to access any other internet address (through browser or ping etc) results in intolerable poor performance (70% to 100% packet loss in ping). Ethernet connection (eth0) works perfectly though. Am furnishing the details below:
Netbook: HP Mini 311
Product No: VM257UA#ABA
Model No:311-1000NR
Ubuntu Netbook Remix:
[Code]...
I want to share my internet connexion via ad-hoc WiFi. If it's unsecured, it works fine, but when I use WPA encryption, it doesn't work anymore! I can connect from my iPod touch, but no internet. I connect to the internet from my laptop, via eth0 I want to share my internet connection via wlan0 I have no idea what's wrong
View 1 Replies View RelatedI have been using windows 7 for awhile now, and i was using connectify (an internet connection sharing program that turns your laptop into a wireless router), and i'm planning on completely switching to Linux from a dual boot, and i was wandering if there is a way to share an internet connection (mainly to my PS3) on Ubuntu 10.04 x64, and wirelessly if possible, though i wouldn't mind if it was through Ethernet.
View 1 Replies View RelatedIm living in a student-city where we get one internet-cable in the wall each, if we need more we are told to use a switch. But, since ive got some tech that depends on wifi, I was wondering if its possible to setup my ubuntu to work like a sort of wifi-switch?
Basically, Im not allowed to set up anything that resembles a router..(so no dhcp) all i need is what a switch would do, only wireless and wpa/wep would be very nice
Atm ive got my cabled network plugged into my onboard ethernet-port, and ive got a d-link DWA-556 (Atheros AR5008 I think) wifi card that i wanted to use to share my connection. is this doable?
i was fed up after i can't connect to wifi using ubuntu. the problem happened after my router is being replaced to a new one because the old one got struck by lightning. good thing i dual-boot my laptop so i can access the internet using Windows 7 now.
i use the default network manager to connect to wifi before, but it all seem to be failed after the replacement of router. i also used Wicd but it failed to connect either. it says in the notification "disconnected: bad password" but the password was right. my wifi used WEP password with open authentication.
i even remove the WEP password and try to connect, but it failed. all i can do is to boot in windows 7 and surf internet there. what could cause this problem? is it the router, the telephone line? i can set the router settings if i want, but i don't know what causes the problem.
how to switch to it because i keep getting my connection dropped with the default network manager. he said to make sure i was plugged in via ethernet, purge network manager - then apt-get WICD. the problem is, not even ethernet works once network manager is purged.
so - before i try this i wanna know, can i just download WICD before hand, then purge network manager, then install WICD. OR, can i just install WICD now, then once i purge network manger it will move over to WICD as the default?
how should i go about changing to WICD?
it has to be a driver thing, its happened on multiple installs - on network manager and on WICD
it usually happens (or at least more often) when im streaming a live feed from a website, and it doesnt reset itself unless i turn the computer OFF (not restart) and back on
basically what happens is, with both the network manager and WICD - the wireless just cuts out and stops detecting any network at all, disconnected. i have tried terminating the process and restarting the applications via terminal or run command; i dont know what to do it just keeps happening. sometimes it wont happen for 2 days, sometimes it happens five times in one day.
it really seems to be affected by what im doing on, sometimes i'll have multiple videos going and it starts to chug, and i know when its gonna happen - wifi cuts out. it doesnt DROP, it just stops working, detecting networks.
like i said, even restarting doesnt fix this. i have to quit the application, turn the computer on and off - then boom its right back on when it comes back.
so strangeeee.
so far i've had 3 ubuntu problems in the week i've had it.
1. this
2. "couldnt update .ICEauthority" at login
3. and this made me have to reinstall yesterday - nothing i would install would run anymore, no errors, no processes - i just click the icons and nothing happens.
I was connected to internet by wired connection in my home. I was able to share my Internet connection to other computer by proxy using squid. My question is, Can I share my internet connection to mobile device by WiFi? I'm using ubuntu 9.10 in my laptop.
View 5 Replies View RelatedI need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies View RelatedIts a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
