Ubuntu Networking :: After Start Nm-applet Always Has Wifi Not Startet?
Jan 2, 2011
if some options are not really described but i use the german Version. I am new with Ubuntu and Network Manager. Everything ist working fine, but when i start my Netbook i always have to switch on my wifi by my self. Now my question: is there any way to give nm-applet the information with some start option to start with wifi swiched on? Inside the connection Options i already switched on "connect automatically" and "all users can use this connection" also i found the option inside /etc/NetworkManager/nm-system-setings.conf
no-auto-default=<MAC:Adress> Ubuntu (MavericMeerkat) i386 / Netbook Lenovo S10-3s / 0.8.1+git.20100809t190028.290dc70-0ubuntu3 (network-manager-gnome)
View 3 Replies
ADVERTISEMENT
May 2, 2010
Installed Lucid yesterday. Rebooted and lucid seen my wifi connection but after a few mins drops the connection and will not re-connect. Now, I cannot get it to connect at al even though the WPA password is correct, and rebooting to Win7 shows no problems there.Looks like it's back to go old wicd,
View 9 Replies
View Related
Jul 29, 2011
I am having issues with wifi on my Lenovo X220. What has occurred is that the network applet in the notification bar no longer shows me any wireless network options. When I click on the applet, the drop down shows me: Wired network: disconnected (greyed out), VPN connections, Enable networking (checked), Connection information (greyed out), and Edit connections. Missing is Wireless connections. This occurred "out of the blue" in the middle of using the computer (i.e. NOT just after a reboot or new driver installation, etc.)
I have noted that:
1. Wired ethernet works just fine.
2. Wireless (wifi) works when I boot into Windows 7 or into a fresh Ubuntu USB Start up disk (implying that this is a software issue, not hardware).
3. The hardware led for wifi is OFF (whereas the Bluetooth light is on.) In Windows or using a fresh ubuntu from USB, this light turns on normally.
This may be irrelevant, but the issue started yesterday when I noticed that the trackpoint scrolling that I had enabled using gpointing-device-settings was not working. I ran that app and checked the settings, which were normal. I then reset the computer, and found the trackpoint was working just fine, but I had no wifi. A few resets later, the problem was not solved.
[Code]...
View 9 Replies
View Related
Mar 3, 2010
The auto connect feature of NetworkManager Applet (version 0.7.997) isn't working on my system. If the WiFi connection dies, Network Manager doesn't detect that the connection has been lost and try to reestablish the connection. I have to manually click on the WiFi hotspot to reestablish the connection. This appears to be the case both while the computer is running and when I first boot it up (i.e. when booting, if the first attempt at establishing a WiFi connection doesn't succeed, Network Manager doesn't retry or try another hotspot).Is this "normal" behavior for Network Manager? If not, does anyone know a fix? Here's some more info about my system:
Computer: Dell Inspiron 1318 laptop
WiFi Chip: Broadcomm BCM4238
Kernel Version: 2.6.31.12-174.2.22.fc12.x86_64
[code]....
View 3 Replies
View Related
May 3, 2011
I installed openSUSE today using a network installer cd, opting for the Xfce environment. Everything went smooth with the installer, but I have some issues with the network. After the fresh install, nm-applet did not start. I got the following error:
Code:
nm-applet
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** (nm-applet:14981): WARNING **: Fallback icon 'gtk-dialog-error' missing: (0) Icon 'gtk-dialog-error' not present in theme
**
ERROR:applet.c:2800:nma_icons_reload: assertion failed: (applet->fallback_icon) Aborted I don't know if the problem was with the applet or with the daemon. Fortunately I used Archlinux for a quite long time and I know how to connect to WPA2 encrypted wireless network from command line, so I was able to connect to the internet and do an upgrade - everything went just smooth and fine again.
After the update and restart, I found the nm-applet icon in the system tray. And here comes the second problem: I can connect with the nm-applet, but the connection does lasts only for about 10 seconds. So practically I can't use the net this way either. Ok, no problem, I fired up Yast, disabled the networkmanager and choose to start my network with the traditional method. I entered the required stuff from my wireless card ( ESSID and passwd ), set to activate at boot time and reboot.....
View 4 Replies
View Related
Mar 10, 2011
I'm having trouble with my java, I got it to isntall, restarted but when I go to any java based chat, or drawing site it doesn't load the applet, the applet shows up it just says "Start: Applet not initialized"
Did I install it wrong?
View 4 Replies
View Related
May 4, 2011
System: Fujitsu-Siemens Amilo Li 2727 Laptop
Wireless: Atheros Wifi chipset
OS: Ubuntu 11.04
I have a problem with the above where I don't see any Wireless networks.
Wireless is enabled from the Network Applet.
I have carried out the following tests and the results are as follows:
Code:
I then tried to unblock using:
Code:
After running the above commands I get this:
Code:
I have checked the adapter and found it to be disabled:
Code:
Other commands I can think of for information that might be useful are below:
Code:
wlan0 Interface doesn't support scanning : Network is down and..
Code:
and
Code:
and
Code:
View 2 Replies
View Related
Jan 27, 2010
How does one get the wifi to auto connect upon start up, instead of having to manually select it every time i log on? I think the following script is what i need but im not sure where i would even need to install it.Automatic WLAN Picker Script
View 4 Replies
View Related
Jul 18, 2010
I use Network Manager applet to connect to my lan (I don't use dhcp however). The problem is that my machine runs several servers (http, ftp, smb, ...) and should be ALWAYS accessible whenever the computer power is ON, even if there is no user logged. Another problem is that the connection is dropped if you logout and then login with a different user who doesn't know wireless settings (eg my mother, sister, brohter...)
So, is there a way to get a wireless connection at boot time? I mean, using Network Manager. Previously I used wicd or cli tools (iwconfig and wpa_supplicant) but then I switched to NM cause it was more ubuntuish. I'd still prefer not to use wicd, but NM really seems not good software to me
View 1 Replies
View Related
May 23, 2010
I am not sure why, but my wireless networking icon on the top right of the panel doesn't show up any more during startup. Previously during startup, the applet would show up and then after a while connected to my wireless network seamlessly.
The only thing I did before and after it stopped working was to enable auto login. I cannot disable auto-login through the GUI and according to postinings in the forums no one knows how to do it through the command line interface.
In the 'Startup Applications' menu it is checked for startup with the command line saying "nm-applet --sm-disable". What can I do to have the network manager icon automatically startup when I turn on Ubuntu? Right now I get it to work by typing "sudo nm-applet" in the terminal window and then pasting my wireless encryption key.
View 9 Replies
View Related
Jan 28, 2011
Is there a way or applet to indicate my wifi speed that I can place on my panel?
View 3 Replies
View Related
Jul 14, 2011
I'm fighting to make wifi work on an HP dv6-3194.
The symptom is that I'm always asked to enter the WPA passwd.
1-This is a fresh FC15 install:
Linux localhost.localdomain 2.6.38.6-26.rc1.fc15.i686.PAE #1 SMP Mon May 9 20:36:50 UTC 2011 i686 i686 i386 GNU/Linux
2- Network interfaces are detected:
3- pci card is RT3090
4- lsusb returns:
5- lsmod returns:
6- iwlist wlan0 scanning detects wifi networks without problems.
7- relevant dmesg entries:
8- wpa_supplicant.log
I've tried many suggestions from this forum about RT3090 or RT2800, but none worked :-(none seemed to be close to my problem:
Most of them relates to interface not seen, wifi networks not detected, system freeze.
View 6 Replies
View Related
Dec 5, 2009
I use network manager applet 0.7.1. I had set the automatic wireless connection to my my wireless network (WPA key secured). Recently, I get the following problem: At the automatic connection, I get the message: Network manager applet (/usr/bin/mn-applet) needs default keyering. As I don't know what it is to type it and then, deny or OK, it doesn't get connected to my wireless network.
View 5 Replies
View Related
Jul 20, 2010
Basically, I chose to give Ubuntu Studio another try (after it had annoyed me with it's lack of wifi), but the problem is that there's no network manager applet in the indicator area (i added it in the top right, the panel's set up as it would be in normal Ubuntu)Using Wifi Radar, i think that the wifi card works in the preempt kernel, it's just that i don't want to use Wifi Radar all the time, can prove to be annoying.
When i start nm-applet, a small space opens up in the indicator applet. I'm not sure if that's something important.Has someone managed to get this to work? (i've installed network-manager and network-manager-applet)
View 4 Replies
View Related
Feb 26, 2011
This might seem dumb, but I have a wifi applet stuck on the upper left corner of the desktop (on the desktop, not on any panel) that I can't get rid. I've never seen this before.When on panel there is kind of a "handle" that I can right click which then I can "remove from panel. There is no such handle on the desktop, if I right click on the applet it would just display the wifi menu.
View 9 Replies
View Related
Jun 28, 2010
I am having a problem with the Cairo-Dock wifi applet. I can activate the applet and configure it, but I can't get it to display an icon. [URL]. I've tried everything on the above page (I think), no go. How to proceed with this?
View 1 Replies
View Related
Mar 15, 2011
kdm startet nicht automatisch nach update von 11.3 auf 11.4?
[Code]...
View 2 Replies
View Related
May 7, 2010
I upgraded from 9.0X to 10.04 on my Sony Vaio VGN-TZ398U which has an internal Sprint mobile broadband card. The card operates properly along with the wireless. The problem that I am having since upgrading is that the Network Manager Applet icon that looks like a cell phone bar display does not show in the notification area at all unless there is a known wireless (wifi) network nearby.
Clarification: If I am in my car, the icon does not show which then makes it impossible to connect using the mobile broadband functions of the Network Manager Applet ( version 0.8 ). If I am in my office with a known wireless network, the icon shows and then I can switch to the mobile card.
I have tried removing the notification area from the panel and adding it again. I have done the same with the indicator applet. Neither has solved this problem.
View 4 Replies
View Related
Oct 12, 2010
I cant get the wireless working now because i cant enable the notification area. is there another way to get the wireless manager to start or even better fix the applet?
View 1 Replies
View Related
Oct 4, 2010
I'm currently using the 10.10 beta of Ubuntu with all of the most recent updates installed. When I boot up the computer, gwibber fails to start up and when I do open it, it shows an icon in the notification area (Which I flat out do not want) and does not use the indicator applet at all (even when closed).
View 1 Replies
View Related
Oct 29, 2010
It's all in the title : the network manager & power manager applets don't start automatically when I open a new GNOME session, although they are checked in the "startup application" dialog...
View 7 Replies
View Related
Apr 23, 2011
Trying to add printers to a new install, and system-config-printer doesn't start. CUPS is working, and I am able to add and manage printers using http://localhost:631, but I would prefer to use the applet.
Code:
lee@tycho:~$ system-config-printer
Traceback (most recent call last):
File "/usr/share/system-config-printer/system-config-printer.py", line 104, in <module>
[Code]....
Similar problems (possibly different causes) include [URL], from only three weeks ago, but no responses, and this one [URL], which I don't think is the issue because I don't seem to have an "extra" python install at /usr/local/bin/python.
View 3 Replies
View Related
Sep 7, 2010
I am a opensuse 11.3 user with firefox 3.6.8.I use 32 bit version and having trouble with one of my banks applet when launched from the firefox , it shows up as 'start:applet not initiazed' and then just hangs there.I have tried a lot googling and looking around in opensuse forums, but could not get my browser working. If I use How do I test whether Java is working on my computer? , it shows the java version is working. I have tried removing icedtea , but did not help.I have also found , when I install opensuse 11.3 , this applet seemed to have worked fine. BUt, after all the online updates system did , it just stopped working with this applet not iniatilized message.
View 1 Replies
View Related
Feb 22, 2016
After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.
The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.
I've also spotted this message in the logs:
Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2
Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?
View 4 Replies
View Related
Sep 2, 2011
nm-applet won't start after system upgrade with gnome 3.0. NetworkManager version is 0.899 in gnome 3 repo, I read somewhere that it should be 0.9xxx for gnome 3.0. Also got this message "The system network services are not compatible with this version." when trying to run network from system settings.
View 1 Replies
View Related
Jul 3, 2010
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
