Ubuntu :: Brasero Won't Copy CD?
Mar 20, 2011
I've previously been able to copy CDs using Brasero. Now when I try, the program will copy the disk, but instead of pausing to allow you to insert the destination disk, it will simply eject the disk and then quit. I can copy disks by selecting 'copy to image' and then burning the image, but this is a pain.
View 3 Replies
ADVERTISEMENT
Jul 1, 2011
I've been attempting to back up my collection of DVDs to an external hard drive using Brasero. I've successfully ripped many of the DVDs to ISO with Brasero, but am now wondering if it'd be possible to burn these back to other discs if I bought them in the future. In other words, does Brasero leave copy protection in place and just bypass it when ripping to ISO, or does Brasero remove copy protection all together leaving me with an decrypted ISO?
View 10 Replies
View Related
May 2, 2010
I'm running Lucid RC with all updates and Brasero 2.30.0. I can't do a disk copy with this program. It gives me an error that not all libraries are installed. It first gave an error that cdda2wav was not installed but that is not true and now I get this general error. I'm installing K3B as we speak but I prefer to keep a straight Gnome installation.
View 9 Replies
View Related
Jun 23, 2010
I tried to make a copy of my Audio CD and it asked me to install some plugins, so I installed them. After installing them, it still doesn't copy any audio cd. Can someone tell me how to fix this problem, because GnomeBaker takes long time to copy an audio cd.
View 1 Replies
View Related
Aug 17, 2010
I was trying to make a copy of a DVD recently. I started with Brasero, and when that didn't work, I installed k3b. Both came back w/similar symptoms. Neither burned the DVD and seemed to hang up. When either program stopped/hung, I checked on the file that was being captured from the original DVD and discovered that both programs produced a max file of 1.5 GB (source was 6+ GB). I checked the size of the partition where the file was being temporarilty stored and there is 18 GB of space.
View 4 Replies
View Related
Jul 9, 2010
Working on backing up my DVD library. Anyone know why Brasero would fail to copy data due to an input/output error? Movie was Toy Story 2, disc 1.
View 6 Replies
View Related
Jul 9, 2010
just installed ubuntu couple of days back on my netbook. I am still a beginner, enjoying my adventure exploring ubuntu. I have another desktop which runs on XP. I am able to access XP shared folders through my netbook(linux). However, i wanted to copy files from XP infact folders using TERMINAL in my netbook, not copy and paste using my mouse. Are there any commands for it?
View 1 Replies
View Related
Sep 9, 2010
I have a freshly installed 10.04 ubuntu, but brasero is not starting, what could be the reason? I started it with the option to show errors, but it didn't show any, it just didn't start.
View 3 Replies
View Related
Feb 12, 2011
I have tried burning media files as data into a DVD (-R). Failed every time. It simulates the burn, and when it starts burning it sometimes ejects the media and at other times just says that it cannot eject the DVD and that it has to be done manually. After the DVD is ejected it errors out.Attaching the log file.
View 2 Replies
View Related
Jul 27, 2011
I am trying to burn a image file to a CD-R, but it fails to start the burn process. Below is the error log.
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]....
View 1 Replies
View Related
Mar 1, 2011
How to copy a Read-Only file in Linux and make the copy writable with a single cp command in Linux (Ubuntu 10.04)? The --no-preserve and --preserve seemed to be good candidates, except that they should "and" the mode flags, while what I am looking for is something that will "or" them (add +w mode).
More details: I have to import a repository from GIT to Perforce. I want that all Perforce depot files are Read-Only (that is how Perforce was designed), while all other files that were derived/copied from depot files are writable. Currently if a Makefile tries to copy a Read-Only file then the derived file will also be Read-only. This leads to build-errors when cp tries to overwrite Read-Only file second time. Of course the --force is a workaround here but then the derived file is also Read-Only. Also I do not want to mess with "chmod" after each "cp" command - I will do that only as the last resort.
View 1 Replies
View Related
Sep 1, 2010
I have a 160GB harddrive which I installed a F12, would like to upgrade to a bigger drive, but I hate to have to re-install everything.
Recommend a good disk copy utility? The utility should be able to not only copy files, but boot sector and everything. So I just need to make a copy, change my BIOS to boot from the new drive and run everything as before.
View 11 Replies
View Related
Feb 26, 2010
I am trying to back up a dvd I own but brasero says it cant without some plugins. Where do I get brasero plugins?
View 5 Replies
View Related
Jun 21, 2010
running lucid and whatever updates are current.Im attempting to burn a avi to dvd format with brasero, but when i hit "burn" brasero sais "ejecting disc" and says that an internal error has occurred. the saved log is blank.any thoughts? i have dvd author and the error message doesnt appear until the disc has ejected. but really it should not be ejecting if it is going to perform a burn.
View 2 Replies
View Related
Nov 3, 2010
I want to burn an iso file to my DVD-r, i use brasero and yesterday have upgraded to 10.10 NBR (UBUNTU RULES- I HAVE HAD IT FOR 2 YRS!) when i click on the 'burn image' tab on the brasero menu all is well but then when i click the properties and click on 2.0x speed (my friends drive can't read anything set any higher than 2.0x) it does not save that property and it goes and burns at much higher speeds like 3.4X. p.s does anyone know how to get rid of the deleted items icon on the 10.10 NBR menu
View 5 Replies
View Related
Feb 18, 2011
I need to burn tracks that total to 80-82 minutes on 80min CDs. However, Brasero stops the burning process right at the start complaining there is not enough space on the CD. I tried having Brasero create an image and burn it with k3b. However, Brasero creates a .cue and a .bin file, but when loading the .cue file, k3b says that it does not seem to be a valid image, even when selecting ".cue/.bin image" or "audio cue file" as the image type. k3b itself refuses to burn .mp3 files without manual conversion. what should I do to achieve my goal?
View 4 Replies
View Related
Mar 9, 2011
Lately, I have found that I have to go back to Vista (yes, old Vista no one loves) to burn an iso file on to a CD-RW. Brasero simply don't even see the CD-RW to even blank it, let alone burn the new iso file. I am using Ubuntu 10.04. As I have Debian 6 (gnome and KDE) I tried the same CD-RW, but neither Brasero, nor KDE's K3B 'saw' the CD-RW.But, the in that Vista, the CD/ISO burning software 'saw' the CD-RW without fail. Btw, this same problem happens with Unetbootin. Linux Unetbootin works worse than the Vista Unetbootin!Now, I have to use Vista to burn CD/DVD/Isos.Is there a some special problem with Linux burning software? I know that some developers are not happy with Brasero,
View 9 Replies
View Related
May 4, 2011
I have no idea why Braseo won't write this album to a CD. I can easily listen to the whole album with Banshee, but Braseo won't burn it I copy and pasted the log file below.
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroNormalize called brasero_job_get_action
BraseroNormalize called brasero_job_get_action
BraseroNormalize called brasero_job_get_tracks
[Code]....
I read the log file and I can't make any sense out of it.
View 8 Replies
View Related
May 14, 2011
Every time I try to open Brasero, it opens for an instant and then closes. I can't get it to open.
View 4 Replies
View Related
May 29, 2011
I'm planning to begin using K3B to burn backup data DVDs. Brasero kinda disappoints as burning software. It can't verify the data after a burn. It only offers the maximum burn speed. It doesn't off options like Disk At Once and Track At Once. K3B is oriented towards KDE. Are there any other GNOME burning choices than Brasero?
View 9 Replies
View Related
Jun 15, 2011
I am trying to burn a dvd using brasero but this is part of the log file message.
BraseroLibburn asked to stop because of an error error= 1 message= "SCSI error on write(806960,16): [3 0C 00] Write error" BraseroLibburn stopping Session error : SCSI error on write(806960,16): [3 0C 00] Write error (brasero_burn_record brasero-burn.c:2862)
View 4 Replies
View Related
Jun 21, 2011
Is there some way of setting up Brasero so that it burns without 2 second gap?
View 4 Replies
View Related
Jan 10, 2010
I see there are a lot of other threads on this subject, but I don't find any solution in the other threads. I have been trying to burn cd's directly in Ubuntu, using Brasero, which was already installed. Why does it not work? It says that an "unknown error occurred" or something like that. I don't remember the exact error message right now. I am now burning cd's in "Gnomebaker" which I found in the applications list. This works fine, but only at the speed of 4x, no faster. I hope to get the brasero application to work, as this is the easiest, fastest way, just dragging files to the cd.
View 2 Replies
View Related
Feb 27, 2010
I created a system backup ISO with remastersys that's about 3.4 GB, and I've repeatedly had failure and about 4 coasters now with both K3b and Brasero trying to burn it. I even ditched the original ISO and made another- same problem.I have always had problems burning discs in both programs, and of all the times I've tried to burn anything with either, I've gotten errors near the end of the data check stage, in verifying the data burned. I'm really tired of this, and I need this ISO perfect to reinstall my OS on a new laptop harddrive.This time it's K3b. It burned successfully, but I get errors in the data verification stage. Here's what I got:
Code:
System
K3b Version: 1.0.4
[code]....
View 4 Replies
View Related
May 15, 2010
I need to know if there are better burning utilities , I am using the default Brasero with many writing errors
View 2 Replies
View Related
May 17, 2010
So I popped in a blank CD, opened up brasero, told it to create a new video project, added my files.... It told me to install vcdimager, so I did that and restarted brasero. I then told it to burn the video files to the disk as an (S)VCD. It began converting the files before the burn. After the conversion was complete, it gave the message "ejecting medium" and then it ejected the disk. After that, it said it encountered and error and wouldn't do anything from there. I tried a different CD, I tried just closing the disk drive. It just gives me the same error.
View 2 Replies
View Related
Jun 10, 2010
I'm having trouble burning a DVD via command line or Brasero. The DVD Burner is the only IDE Device in the system. Although Disk Utility seems to display it as SCISI. Originally Ubuntu would only see the drive but do nothing when a DVD is inserted it. atleast recognizes the DVD now.
LSHW:
Code:
*-ide:0
description: IDE interface
product: MCP55 IDE
[Code].....
View 1 Replies
View Related
Jun 14, 2010
I would like to know how to get brassero to look at my 2nd hard drive I can only see my main HD. I have music files on my other drive.
View 1 Replies
View Related
Jul 15, 2010
No problems with CD-RW, but DVD+RW are being blanked in an incorrect way. Ubuntu cannot recognize them at all after the blanking. I have to take the disks to another computer having Windows installed to blank them via Nero, and after that I they become OK for burning in Ubuntu via Brasero. I've got an old LG CD/DVD drive which was working fine in Windows. Who can recommend another program for CD/DVD burning for Ubuntu 10.04? (correctly blanking, certainly) I have installed the suggested updates for Brasero but of no avail.
View 1 Replies
View Related
Jul 15, 2010
I tried to copy a CD with Brasero. Brasero said: "All required applications and libraries are not installed. Please install manually and try again:
toc2cue (application)
cdrdao (application)
toc2cue (application)
cdrdao (application)".
Ignoring that each was listed twice, I first ran sudo apt-get update on the terminal, then ran
sudo apt-get install cdrdao
I tried another copy operation, but this time:
The error message for a missing toc2cue was no longer there, but there were still 2 error messages for a missing cdrdao, which I had just installed! I tried installing cdrdao again; but got the message that the latest cdrdao was already installed. I tried installing toc2cue but got the message that it could not be found. how I can get cdrdao to be recognized and toc2cue to get installed?
View 9 Replies
View Related