Ubuntu / Apple :: Manual Installation On Already Created Partition To Create Dual Booting PowerMac?
Jul 15, 2010
I have booted from the .iso cd I made on my Mac last night and was tempted to install it on a 6gb partition that I have on my main HDD but was a bit scared to go past the fourth (or so) step in manual installing where I pick that partition and *do what?* Is it going to install the OS on that partition and leave everything else alone to give me a dual booting PowerMac? It doesn't quite say. I am fearful of screwing up my little ol' machine. Can anyone direct me to something that gives a step by step in manual installation on an already created (HFC+) partition to create a dual booting PowerMac?
View 3 Replies
ADVERTISEMENT
May 28, 2010
After four attempts and diverse partition map problems, I finally managed to install successfully clean versions of both Mac OS X Snow Leopard and Ubuntu Lucid Lynx on my old MacBook Pro C2D (2,1) and a new 320 GB HDD, by following these instructions:[URL]
Now, I've got a big partition for Mac OS X (286 GB) and a small partition for Ubuntu (30 GB, as well as two smaller partitions for grub and swap). However, I'd like to shrink the Mac OS X partition to, say, 35 GB, and use the freed up 251 GB as a shared partition to keep files for access from both OSs. But Mac OS X Disk Utility won't let me resize the Mac OS X partition (and warns that it might not be a smart thing to do, as the disk has been partitioned for Boot Camp, etc).
Is there some way I can resize the partition, or do I have to start all over again?
View 4 Replies
View Related
Apr 23, 2010
how much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
View 2 Replies
View Related
Jul 24, 2011
I currently use Ubuntu full time, but on my new one I am planning to dual-boot. My new computer will have a 500GB HD and 4GB Memory. I plan on using Ubuntu more than Windows, specifically for internet applications etc. Windows I plan on using for media and such. I will be partitioning the hard drive manually, and would like to know how much room I should give each OS, how to create a large section for all my files to swap (how does swapping work?) and any other partitions I need to make for recovery. I've read the Ubuntu and Windows "How to Dual-Boot" tutorials, and I still feel kind of lost on a general size for partitioning each section.
View 9 Replies
View Related
Apr 28, 2011
Am trying to format my SD card and creat a FAT32 partition for booting
after following procedure i was stuck with the below command
Command (m for help): [t]
Selected partition 1
Hex code (type L to list codes): [c]
Changed system type of partition 1 to c (W95 FAT32 (LBA))
i don't have the [c] option or any "W95 FAT32 (LBA)"
View 3 Replies
View Related
Jan 8, 2009
I have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
View 5 Replies
View Related
Mar 7, 2009
I'm trying to achieve my dream (but indeed not perfect) boot scenario: dual-boot OpenSUSE and Fedora with shared /boot, /home and SWAP partitions. First I installed OpenSUSE (sda3 on my layout below) with separate /boot (sda2), /home (sda5, encrypted) and SWAP (sda6), next I installed Fedora on /dev/sda1, and pointed it to mount sda2, sda5, sda6 with respective mount points, without formatting. I proceeded with the installation without installing new GRUB bootloader (overwriting an existing one).
It was successfull and now I'm back in OpenSuSE trying to edit menu.lst file (under /boot/grub) to make GRUB boot Fedora.
I attached a copy of menu.lst I cooked up for now. OK, it's a mess. Life would be allot easier if I didn't have a separate /boot partition, as I could just chainload, but it's no longer possible (or is it?). May be I needed to specify the resume device or problem is in initrd? below are the contents of /boot:
View 4 Replies
View Related
Feb 13, 2010
The problem is, on a machine, you can only have 4 primary partitions. sda1 and sda2 are my Vista and Recovery partitions respectively, which eliminates two of my primary partitions already. I myself have never used logical partitions, and was wondering if any of the partitions the Beginner's Guide recommends (/, swap, /var, and /home) could be made logical, and if I even need a swap partition.
View 5 Replies
View Related
Jan 23, 2011
I had Ubuntu 10.04 on this machine and wanted to convert it to a dual boot. It's a 500GB hard drive. The HDD had 3 partitions: one really big one, and two swap areas of about 6 GB each. I ran GParter and carved the big partition into a 100GB partition and a 400GB partition (less the swap areas). Then I installed Windows XP into the 100GB partition, then installed Ubuntu 10.04, selecting the "create dual boot" option.
It dual boots beautifully, and everything runs just fine. But I find that Ubuntu has split the 400 GB partition into two 200 GB partitions, and one of them is simply off-limits. I can see it, but I can't write to it. The attached png shows the Disk Utility, with the mystery partition selected. Its only contents is a folder called lost+found; I cannot open it.
View 9 Replies
View Related
Mar 14, 2011
I've shrunk my Windows partition to ~200GB and made ~100GB of free space for Ubuntu BUT .. it doesn't allow me to create a new partition there as I already have 4 primary ones.Since all of the given partitions ( including Recovery and Tools ) can not be touched ( removed ), I have no idea on how to solve this ..
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]....
View 1 Replies
View Related
May 10, 2010
I'm trying to install Ubuntu Server 10.04 on a PPC G4 PowerMac.
It took a while, but finally I managed to get through the installation.
Unfortunately, after choosing Ubuntu from the yaboot menu at startup, it takes a moment and then displays a kernel panic about not founding /sbin/init .
Well, /sbin/init is there for sure (I've checked again, using the CD).
View 2 Replies
View Related
Sep 15, 2010
I have a fresh install of Lucid on my PowerMac G4 Desktop (PowerMac3,6) / 867MHz. Right now I'm stuck with a resolution of 800x600. From what I have read, I know I need an xorg.conf file (install doesn't create one). I've looked around for a working one - and tried creating my own with no luck. I gather the following information is needed:
Code:
*-display
description: VGA compatible controller
product: NV17 [GeForce4 MX 420]
vendor: nVidia Corporation
physical id: 10
bus info: pci@0000:00:10.0
[Code]...
View 1 Replies
View Related
Jun 27, 2010
I can get ubuntu to work fine on its own (except for sound, a problem for another day), but I can't get dual booting to work.I'm using this page as a guide:URl...I started out with a clean OSX snow leopard install. I ran bootcamp and shrank my 320G hfs+ file system to 160G. I installed rEFIt, and rebooted twice (you don't see the menu after rebooting once). Then I booted from my 10.04 CD, and deleted the partition created by bootcamp using gparted.When I run the installer and tell it to use the largest continuous space, it makes the / file system in partition #5, and the swap partition in partition #5.
I figured that might cause problems with a MBR partition table, so I partitioned manually, and set up / in sda3 and swap in sda4.When I tried to configure the installation of the bootloader, I had a menu of possible places to install it. I picked /dev/sda3, but then the OK button was grayed out.
View 3 Replies
View Related
Aug 18, 2010
a powermac G4 with radeon 9000 RV250 in ubuntu 10.04 ppc i just want the graphic work better
View 9 Replies
View Related
Mar 20, 2011
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
View 4 Replies
View Related
Feb 8, 2010
I was dual booting Ubuntu with Vista.
Here is what I did:
1. Booted the Ubuntu CD at startup and opened the installer
2. Clicked forward on time, keyboard, etc. and came to PARTITION
3. Manually Partitioned Drives...
I made a EXT4 File System 50 GB for Ubuntu
And a 3 GB swap area for ram
(BUT in the process, my NTSF 250 GB Drive with Vista and my files was wiped)
4. I continued with setup and successfully installed Ubuntu
My boot menu at startup (GRUBS)
Now has:
Ubuntu
Ubuntu(recovery mode)
Memory Test
Another Memory Test
Microsoft Windows XP Embedded (on /dev/sda5)
The XP one gives me an error: The windows boot configuration data file does not contain a valid OS entry
Is there a way to get Vista and my files back? If not, how can I dual boot Ubuntu and get Windows Vista or Windows 7?
View 3 Replies
View Related
Apr 2, 2010
Is it possible to create a boot CD to boot external volumes on an Apple iMac 7.1 (which has an older firmware version and cannot boot external disks, unlike the MacBook Pro 5.1 which can do it, at least with grub-legacy which is all I'll ever use until EFI boot becomes available). There is some promising stuff on www.pendrivelinux.com, and I'll try it, but the instructions are for Windows, and I am not sure how to translate the menu.lst entry to linux (I suppose it would have to be entered in the "automagic" section). Of course I don't want to create a bootable flash drive but to use my external volumes that already boot on the MacBook Pro without altering them, except for installing the ATI video driver (but I have no problem booting in low graphics mode).
Until karmic there was a trick to make the iMac mistake the external volume for an internal one (the root partition had to have the same UUID as the internal root partition), but this does not seem to work for lucid. Anyway this UUID trick is dirty and causes problems when you want to edit the internal partition (which is the point of the external boot - you get a customized maintenance environment that boots much faster than the CD).
View 1 Replies
View Related
Feb 3, 2010
I am trying to install kubuntu on my macbook. I am able to boot from the CD and install fine, but when I try to boot from the linux partition the cursor blinks for a while, then the screen goes blank.I have used the rEFIt partition utility, but when I try to reinstall the grub bootloader as described here: it says "sudo: grub: command not found"When it try "grub", it says:"The program 'grub' is not currently installed. You can install it by typing:sudo apt-get install grub"
View 4 Replies
View Related
Jun 28, 2010
I want to dual boot mac and ubuntu. Now, if I want to remove the ubuntu partion, how do I do so? (I have not yet installed Ubuntu)
View 2 Replies
View Related
Sep 20, 2010
I currently have Ubuntu 10.04 LTS installed on my PC. The details of how it got installed I cannot explain... I installed it on a HD that was not partitioned and I accepted all the defaults that Ubuntu suggested. So as far as I know right now Ubuntu "owns" the whole HD.
I now would like to create a dual-boot system by installing openSUSE 11.3 alongside Ubuntu 10.04 LTS. By reading things here and there, my guess is that I need to create a partition for openSUSE by shrinking the one for Ubuntu. But I am really not sure.
So I downloaded the CD version (GNOME) only of openSUSE, launched the installer and the process came to the following suggestions which is basically all Greek to me:
* Delete partition /dev/sda1
* Create root volume /dev/sda1 with ext4
* Create volume /dev/sda3 for /home with ext4
* Use /dev/sda5 as swap
As I said before, what I would like to do is install openSUSE side-by- side with Ubuntu and create a dual-boot system. I do not want to delete Ubuntu! I got scared by that "Delete partition /dev/sda1" thing mentioned above and so I aborted the installation.
What is the installer suggesting? Has it realized that I already have Ubuntu installed and that I want to create a dual-boot system?
View 9 Replies
View Related
Dec 25, 2009
I have an Acer Aspire One D150 with the following partition table:
I would like to free up a bit of space from the Win7 partition and install OpenSuse 11.2 KDE alongside my existing OS'es. Trouble is no matter what I do YAST wants to install OpenSuse in / and /home over the top of Ubuntu. It won't let me create any new mountpoints for / and /home. Furthermore, I've heard that even if I can successfully install OpenSuse I will face problems as Ubuntu uses Grub2 and OpenSuse still uses Grub-legacy.
View 9 Replies
View Related
Jun 10, 2011
So, I installed Ubuntu using Wubi.exe for Windows. Is there a way to access the files I have on Windows while I'm on Ubuntu? Basically, how can I access files on the other side of the partition?
View 4 Replies
View Related
Jun 24, 2010
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
View 9 Replies
View Related
Apr 30, 2010
Installing Kubuntu 10.04 Lucid AMD64 from a live CD. During manual partition (allocating mount points to existing partitions), the installer crashes. It just vanishes and drops back to clear desktop of the live CD. The error check from the CD boot menu reports no errors. Running the installer from the CD boot menu (instead of running the live CD first) gives similar symptoms. At the same point in manual partitioning, the installer crashes to a black screen, then starts a live CD session of KDE.
This hardware installed the beta version of Kubuntu Lucid 10.04 AMD64 without error, and has run earlier versions of Kubuntu without this problem.
It looks like a bug to me, so posted on launchpad ...
https://bugs.launchpad.net/ubuntu/+s...er/+bug/572622
View 4 Replies
View Related
Jan 25, 2011
I have installed a dozen dual boot XP / Ubuntu boxes, however this one has me stumped. After the installation failed in the partitioning phase I tried manually partitioning which also failed. Then I went to using a Gparted LiveCD. I can resize the NTFS partition fine each time rebooting in XP and it is OK. However when I shrink the NTFS then try to add an ext4 (or ext3) right after the NTFS it acts like it is working, then when it says "complete" the disk disappears out of Gparted and it shows no devices. If I reboot into the LiveCD it shows a blank second partition, if I try to format it in ext4 I get the exact same results. If I go to Windows it will show an unknown healthy partition. If I grow the NTFS back to the full 60Gb it seems to work fine. It just won't create a second primary ext4 partition.
View 1 Replies
View Related
Aug 13, 2011
I got an old Sony Vaio from a friend & wanted to keep a stripped down version of windows along side 10.04. During installation when I saw two Windows partitions. I saved the first one which was about 5 gig & deleted the other bigger partition & used ext4 on the free space for Ubuntu. I assume I only kept the recovery partition so basically I have sda1 (recovery partition)ntfs & the rest ext4. If I pick Windows from the grub menu at start-up the recovery starts but then shuts down with an error. I'm assuming its looking for the other ntfs partition to install & can't find it but I'm not sure what to do. I haven't done anything with Ubuntu yet so deleting & reinstalling is not a problem but if I do getting back to the restore menu probably will be. I don't have any disks that came with the computer either.
View 8 Replies
View Related
Oct 14, 2010
I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
View 7 Replies
View Related
Mar 4, 2010
I just finished installing Karmic Koala on my computer a little while ago... and I chose to partition the drive manually. My computer has 2 hard drives:
Here's the HDD which boots first and has Grub and Ubuntu on it:
[URL]
And my second HDD which has Windows and a backup partition called "datas":
[URL]
And here's a copy of my /etc/fstab file:
Code:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[code]....
The ext3 partition on the 250GB drive called "datas" is an old partition that I created while I was still using Intrepid... and it works just fine. However the partition called "archives", which I created during the installation of Karmic, doesn't seem to work properly. For some reason I can't write any files or folders on it. Why is that?
View 3 Replies
View Related
Oct 17, 2010
I'm having problems trying to install Ubuntu 10.10 onto a partition that I have created. I boot from disc, select that I want to instal it to a partition and when I get to the list of available partitions, it is not listed.
View 7 Replies
View Related
Aug 11, 2011
I have Vista Home edtion and Linux, I have formatted Linux partions and now that Grub is not letting me boot into Windows..I had C:wIndows D:New Volume and rest of the space was E:
View 5 Replies
View Related
