I'm having problems trying to install Ubuntu 10.10 onto a partition that I have created. I boot from disc, select that I want to instal it to a partition and when I get to the list of available partitions, it is not listed.
View 7 RepliesI just finished installing Karmic Koala on my computer a little while ago... and I chose to partition the drive manually. My computer has 2 hard drives:
Here's the HDD which boots first and has Grub and Ubuntu on it:
[URL]
And my second HDD which has Windows and a backup partition called "datas":
[URL]
And here's a copy of my /etc/fstab file:
Code:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[code]....
The ext3 partition on the 250GB drive called "datas" is an old partition that I created while I was still using Intrepid... and it works just fine. However the partition called "archives", which I created during the installation of Karmic, doesn't seem to work properly. For some reason I can't write any files or folders on it. Why is that?
I used gparted to create 60GB free space which I then formatted as ntfs. However,when I go to install XP I get the blue screen of death.I know the XP installation disc is OK.The ntfs partition (sda3) is after the ext4 partition (sda1) - could this be the source of the problem?
View 9 Replies View Relatedmy friend was installing ubuntu when he while editing the table from the installation menu, chose to shrink the partition and use it as swap, he didn't realize he was using the actual partition not the 1 to be created as swap.so he ended up with 160 GB swap and 15 GB NTFS partitions.will deleting the partitions and recreating the NTFS partition again restore his data?
View 2 Replies View RelatedI have booted from the .iso cd I made on my Mac last night and was tempted to install it on a 6gb partition that I have on my main HDD but was a bit scared to go past the fourth (or so) step in manual installing where I pick that partition and *do what?* Is it going to install the OS on that partition and leave everything else alone to give me a dual booting PowerMac? It doesn't quite say. I am fearful of screwing up my little ol' machine. Can anyone direct me to something that gives a step by step in manual installation on an already created (HFC+) partition to create a dual booting PowerMac?
View 3 Replies View Relatedi just installed ubuntu 10.10 im using it now but my 2nd partition that got all my backed up files on is not showin up so i ask how do i get to use it ? and another thing is when i was installing the backup partition said it has no MB used ?
View 9 Replies View RelatedI have just recently installed Fedora 14 Standard Edition. Upon after mounting another parition, I attpempt to find the new partition files in the directory I created for the mount point, but it is not showing. I know the mounted parition is there becuase upon "ls -l /iso", all the files show up.
I had previously tried out Fedora 14, XFE, and this problem did not occur. I also previously installed this same Standard Edition, and this problem did not occur. This is from the exact same download, however, the only difference is I installed Grub into a different partition. But now I am unable to find my new folders in Gnome.
I was dual-booting XP/Win7... Uninstalled Win7 and reset boot loader with XP's Went to install 10.04 for dual-boot and it is showing that loader as "Widows 7 loader"
View 9 Replies View Relatedwhen I tried to install Fedora on my pc, I got this error message " Defined Root partition not created a / boot/efi partition. I am trying to install it on a seperate hd. My main one has windows xp pro, but I do not want to interfer with that at all?.
View 14 Replies View RelatedI have set up a cron job in linux server using the command 'wget -q -o wget_outputlog url'
But on every run, an empty file being created at root.
How to stop this.
I was able to create a new partition in my terminal using fdisk.
So basically this is just an additional partition in my currently installed linux (ubuntu). Now my problem is, how can I use that partition or how can I save files or install applications on it?
I tried creating a File system mkfs.ext3 /dev/sdb1, and I also mounted it, but when I copy files on the directory where I mounted it, it says "Permission Denied". I dont know if Im doing it correctly though.
Im a new user of Linux, for my present activity, I was able to create a new partition in my terminal using fdisk.So basically this is just an additional partition in my currently installed linux (ubuntu). Now my problm is, how can I use that partition or how can I save files or install applications on it? I tried creating a File system mkfs.ext3 /dev/sdb1, and I also mounted it,but when I copy files on the directory where I mounted it, it says "Permission Denied". I dont know if Im doing it correctly though
Thanks
I am new to ubuntu! I installed ubuntu and removed all partitions, now I have only one partition with 160 GB, Wanted to install again Xp but my laptop cant boot from CD/DVD, used GParted to create another partition and created one ntfs, but I have now one problem, ubuntu is not starting and I cant boot from CD. My laptop is Sony Vaio VGN-Fz18E .
View 8 Replies View RelatedI'm trying to install 10.10 to HP nw8440, it boot's from cd, installs and don't start's, just showing me "No such partition" error.Partitions on my laptop are:
Code:
sda1 -> Win7 Bootloader
sda2 -> Win7
[code]....
Alright, so, I booted using linux live, and was poking around Gparted, and was going to test some things on my extra hdd (80gb, IDE) -I thought that extra hard drive was selected, what I clicked Create Partition Table. Apparently, it was my primary hdd, (250gb Sata, Windows Vista x64) that was selected. I think I may have tried to cancel it after a few seconds, realizing what was happening, but yeah, it now shows the entire hdd as unallocated space. I immediately shut down the computer, pulled out linux live and tried to boot to windows, but I immediately got an error saying the disk couldn't boot, asking for a system disk.
There was a thread with a guy who had a similar thing happen to him, but the thread dropped off... [URL]
sudo ./testdisk_static
Opened testdisk for me, but now that testdisk is open, I'm not really sure what I need to do. I'm guessing that the boot sector on that hdd is gone. Are my files gone forever? There are some files that I don't have backed up on there, that I'm hoping are not gone. I would love it even more if I could somehow just repair that boot sector, and not have to reinstall everything on my machine.
I'm a newbie despite using Ubuntu most of the time for nearly 3 years. There are some files which are created automatically in one of my ntfs partition. The files are khq, khp, kht, an autorun inf file and others. They seem to have been created while I was using ubuntu and even though I delete them,they appear again later. I have googled and have found few information that the files are malware. I will like to know if there is a known issue and solution. This is the first time i'm posting a thread.I hope i have post it at the right place and if not,
View 3 Replies View RelatedI had a 40G vfat drive from WIN98 and I used parted to remove the partition, then create a new partition with an ext2 filetype When in parted, and do print...
Code:
(parted) p
Model: ATA QUANTUM FIREBALL (scsi)
Disk /dev/sdd: 40.0GB
Sector size (logical/physical): 512B/512B
[code]....
I need to know when I have bought a notebook. I know I have formatted disk myself and partition created and Ubuntu installed.Is there any way I can get info when I bought a notebook? Like time of disk formatting, partitions created, Ubuntu installed
View 2 Replies View Relatedduring installation, openSUSE gives suggessed partition, but I select "create partition", then "accept", but opensuse still use the sugessed partition by itself
View 2 Replies View RelatedI have an image of the entire disk created using dd. The disk structure follows:
The image was created using:
How would I, if it is possible, mount /dev/sda1 from the image so that I'm able to read the contents?
It's not an option to clone the HDD again, I know how to do it if I had only cloned the single partition by itself. I hope it's still possible with the current image.
How many default partition would be created, when Linux OS to be installed?
View 14 Replies View RelatedI am facing a serious problem.I installed UBUNTU 10.04 and encrypted it during installation. I accidentally erased some of the necessary files from root folder. now the the OS is NOT booting.luckily i still have the encryption key i have some important documents in that drive (desktop folder).
PS: I have tried to run Live Ubuntu it shows the Root, but it does not enter any of the folder.
I have been installing Fedora 8 Linux with already having Windows Xp as my primary OS....
I have a total of 80GB Hard disk.Out of 80 GB,I have freed 8GB for Linux.But during Installation after "selecting language for keyboard" and then choosing "Create Custom Layout", while giving partitions I have alotted 4GB for '/' and 2GB for Swap.
Initially space was created for root(/)...but it is unable to create space for swap and all other boot,home etc...
It is showing the error msg as "Could not create partition as there is no space left for /(root)"...
On a Debian Linux box, SVN Server is installed. In the partition where SVN was installed, Free disk space is causing anxiety, hence started creating new instances in a new partition, though I am able to get the first screen (it prompts for username and password), I am unable to login even though the username and passwords are correct.
View 1 Replies View RelatedI have installed 1tb hard drive and would like to partition as follows:
1) / - 20g
2) /swap - 6G
3) /photos /150g
4) /videos /500g
5) /audio /300g
After 2-3 partition an extended partition automatically created in which I am not able to create specified capacity i.e., say I want 150g of /photos partition, the /videos partition is automatically reduced and a free space at the end appears. Some free space is always there which i am not able to understand. Nevertheless i clicked to create, but I get an error viz. 'device not created'.
I have a Western Digital 3TB USB drive connected to a Raspberry Pi 2 running Raspbian Jessie. I created an 30GB ext4 system partition and a NTFS Data partition using the remainder of the drive. I formatted the NTFS partition as follows:
sudo mkfs.ntfs -Q -L Data /dev/sda2
The drive works fine on the Pi but when I connect it to a Windows 7 pc the pc doesn't recognise the format of the Data partition and can't access it.
On the Pi I ran:
$ sudo fdisk -l /dev/sda2
Disk /dev/sda2: 2.7 TiB, 2968557453312 bytes, 724745472 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
[Code] .....
Partition table entries are not in disk order.
I'm dual booting windows vista and ubuntu hardy on a multi-partitioned Dell D630. I created a partition using mkfs -t ntfs. Linux has no trouble reading/writing to it, but every time I boot into windows, chkdsk tries to "fix" the partition, fails, and tells me that the partition is corrupted. Can anybody suggest a way to convince vista that the partition is indeed ok, or else another way to create the partition so that vista can recognize it?
View 1 Replies View RelatedI just maked an ext4 partition by the help of gparted. Ubuntu is my only OS no dual boot. Using Ubuntu Maverick. The problem is partition must be open as root to do any work else it wont even allow me to open file,create folder,cut copy paste or anything.
View 9 Replies View RelatedI've almost run out of space on the Ubuntu partition, so I figured I would re-size it using Gparted. However, Gparted is not showing that I have any partition in the main hard disk. What's going on?
View 9 Replies View RelatedI was created one folder in linux with current time was 1978(For example). I was moved this folder to usb(FAT32 file format).While seeing this folder in window its not showing the folder time created time stamp, because the USB file system only support the year after 1980 . But again i am putting the same folder in linux ,its showing the correct time stamp.How is it possible? Because FAT32 only supports timestamp after 1980, but still its showing 1978 in linux system
View 7 Replies View Related