So, I installed Ubuntu using Wubi.exe for Windows. Is there a way to access the files I have on Windows while I'm on Ubuntu? Basically, how can I access files on the other side of the partition?
View 4 RepliesAfter four attempts and diverse partition map problems, I finally managed to install successfully clean versions of both Mac OS X Snow Leopard and Ubuntu Lucid Lynx on my old MacBook Pro C2D (2,1) and a new 320 GB HDD, by following these instructions:[URL]
Now, I've got a big partition for Mac OS X (286 GB) and a small partition for Ubuntu (30 GB, as well as two smaller partitions for grub and swap). However, I'd like to shrink the Mac OS X partition to, say, 35 GB, and use the freed up 251 GB as a shared partition to keep files for access from both OSs. But Mac OS X Disk Utility won't let me resize the Mac OS X partition (and warns that it might not be a smart thing to do, as the disk has been partitioned for Boot Camp, etc).
Is there some way I can resize the partition, or do I have to start all over again?
I got an old Sony Vaio from a friend & wanted to keep a stripped down version of windows along side 10.04. During installation when I saw two Windows partitions. I saved the first one which was about 5 gig & deleted the other bigger partition & used ext4 on the free space for Ubuntu. I assume I only kept the recovery partition so basically I have sda1 (recovery partition)ntfs & the rest ext4. If I pick Windows from the grub menu at start-up the recovery starts but then shuts down with an error. I'm assuming its looking for the other ntfs partition to install & can't find it but I'm not sure what to do. I haven't done anything with Ubuntu yet so deleting & reinstalling is not a problem but if I do getting back to the restore menu probably will be. I don't have any disks that came with the computer either.
View 8 Replies View RelatedI have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
I'm trying to achieve my dream (but indeed not perfect) boot scenario: dual-boot OpenSUSE and Fedora with shared /boot, /home and SWAP partitions. First I installed OpenSUSE (sda3 on my layout below) with separate /boot (sda2), /home (sda5, encrypted) and SWAP (sda6), next I installed Fedora on /dev/sda1, and pointed it to mount sda2, sda5, sda6 with respective mount points, without formatting. I proceeded with the installation without installing new GRUB bootloader (overwriting an existing one).
It was successfull and now I'm back in OpenSuSE trying to edit menu.lst file (under /boot/grub) to make GRUB boot Fedora.
I attached a copy of menu.lst I cooked up for now. OK, it's a mess. Life would be allot easier if I didn't have a separate /boot partition, as I could just chainload, but it's no longer possible (or is it?). May be I needed to specify the resume device or problem is in initrd? below are the contents of /boot:
The problem is, on a machine, you can only have 4 primary partitions. sda1 and sda2 are my Vista and Recovery partitions respectively, which eliminates two of my primary partitions already. I myself have never used logical partitions, and was wondering if any of the partitions the Beginner's Guide recommends (/, swap, /var, and /home) could be made logical, and if I even need a swap partition.
View 5 Replies View RelatedI have Vista Home edtion and Linux, I have formatted Linux partions and now that Grub is not letting me boot into Windows..I had C:wIndows D:New Volume and rest of the space was E:
View 5 Replies View RelatedI have booted from the .iso cd I made on my Mac last night and was tempted to install it on a 6gb partition that I have on my main HDD but was a bit scared to go past the fourth (or so) step in manual installing where I pick that partition and *do what?* Is it going to install the OS on that partition and leave everything else alone to give me a dual booting PowerMac? It doesn't quite say. I am fearful of screwing up my little ol' machine. Can anyone direct me to something that gives a step by step in manual installation on an already created (HFC+) partition to create a dual booting PowerMac?
View 3 Replies View RelatedI was dual booting Ubuntu with Vista.
Here is what I did:
1. Booted the Ubuntu CD at startup and opened the installer
2. Clicked forward on time, keyboard, etc. and came to PARTITION
3. Manually Partitioned Drives...
I made a EXT4 File System 50 GB for Ubuntu
And a 3 GB swap area for ram
(BUT in the process, my NTSF 250 GB Drive with Vista and my files was wiped)
4. I continued with setup and successfully installed Ubuntu
My boot menu at startup (GRUBS)
Now has:
Ubuntu
Ubuntu(recovery mode)
Memory Test
Another Memory Test
Microsoft Windows XP Embedded (on /dev/sda5)
The XP one gives me an error: The windows boot configuration data file does not contain a valid OS entry
Is there a way to get Vista and my files back? If not, how can I dual boot Ubuntu and get Windows Vista or Windows 7?
I have a laptop that came with Windows Vista (64-bit) installed. I created a new partition and installed XP (also 64-bit) alongside it.Last night I shrunk my XP partition and created another new partition and installed Linux (CentOS 64-bit) on it. I made an error in judgment and didn't allocate enough space, so I need about 10 more gigs for the Linux partition. It boots up and runs, but I need about 10 more gigs of storage for the files I want to keep on the partition (and yes, they have to be on the partition, I definitely need to know how to do this, not a workaround)I went into Vista and shrunk the XP partition by 10 gigs, so now I have 10 gigs of free, non-partitioned space.
As it stands, when I start up the computer I get the GRUB boot loader. I can boot my Linux install or choose "Other" and be taken to the Vista boot loader. From there I can choose XP or Vista to boot.So, my question is... what is the best way to append the 10 gigs of free space to the Linux partition? Is this something I should do inside of Linux? I have the option to do it in Vista, but the partition shows up as "healthy" but without a file system type.I just don't want to screw up the boot loader, partitions or anything else.This isn't my area of expertise, so if anyone could give me a good suggestion or solid answer
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I am trying something: I would like to access to some data stored on a usb stick while I am booting to the kernel using the "init=/bin/sh" parameters.Is that possible ?My USB stick is detected when I do 'cat /var/log/messages.log | grep sdb". I had to "modprobe usb-storage".Quote:localhot kernel : sdb: sdb1localhost kernel: sd 3:0:0:0: [sdb] Attached SCSI removable diskBut I still can't get it mounted.Quote:mount: special device /dev/sdb1 does not exist"
View 2 Replies View RelatedI have a laptop dual booted with windows vista and ubuntu.I downloaded certain movies and music files while using windows vista,which are there in my hard disk,My question is can i access these music and video files when i boot into ubuntu,and can i play them?
View 5 Replies View RelatedI have a dual boot ( Ubuntu 10.04 and Linux Mint), but I spend most of my time in the Ubuntu 10.04 partition. The point is that I have a huge files in the Mint compartment and I would like to gain access to those files from my Ubuntu 10.04 partition. I have tried samba and could not get the file sharing system to work. I had used samba when I was dual booting between Ubuntu and Windows and it worked but not in my present Linux dual boot.
View 4 Replies View RelatedUbuntu and am dual booting it with Vista and I want to be able to access all my files from Vista whilst running Ubuntu. When I go on places, network, and click on windows network, I get a message saying 'Unable to mount location: failed to retrieve share list from server'.
View 3 Replies View RelatedMy setup is as follows:
eth0 - lan ip
eth1 - WAN ip
I have installed a sip server on the box. From the box I would like to access machines on wan and lan. First of all, is it possible? If yes, I have setup up the nics with default wan gateway. However, when I try to ping wan url, no response. Are there other things I need to do to accomplish this?
I dual boot Ubuntu 10.4 and Windows 7 (actually, just installed the Win7 a few hours ago.
I like that I can access the Windows 7 partition from Ubuntu, but not the other way around. I found links for several file explorers, but is there any way to install an extension for the standard Windows Explorer that can open EXT3 partitions (and the files therein) as if they were NTFS?
Most of the links I found refer to custom file explorers. I only want to use one file explorer, not switch between two different ones depending on which partition I want to open. Also, if I use a custom file explorer, how will dialogs like "Save as..." be able to handle saving directly to EXT3?
I found this website [URL].., and am able to go all the way up to "ecryptfs-mount-private" command, but the response I get after entering my login passphrase is "mount: Operation not permitted". I am not sure why though I am guessing I have a permission issue.
View 1 Replies View RelatedIam using Centos 5 64 bit.I want to access my local drive on centos. Waht is the procedure 4 that?
View 1 Replies View RelatedI tried to reinstall Centos, and the reinstall failed due to a flash disk being pulled out in the middle of the operation. I am left with an un-bootable system and I want to access my data, if possible.
Prior to the reinstall the disk info was:
== BEGIN cat /etc/fstab ==
/dev/VolGroup00/LogVol00 / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
[Code]...
So, The disks are still intact (I hope) but the LVM information is gone.is there anyway I can access /dev/sda2? When I try mounting it from the Rescue environment the command hangs, i.e. nothing happens.
I am not sure if this is the right place to ask, but I am trying to find out how I can modify forms on my Windows partion. I am running a dual boot with Win 7 and Open Suse 11.2. I can access and read the NTFS files but can not change them or add to the Win 7 Partion. How do I change ownership and permissions so that I can work on them from Open Suse 11.2
View 9 Replies View RelatedI was using Windows XP on my 500GB HDD. I wanted to use any Linux os, so yesterday I removed XP & installed Fedora 14. Now I'm not able to access one of the partition (380GB).
Quote:
[root@localhost ~]# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
[Code].....
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies View Related1.) I have several versions of ubuntu installed on my computer. Technically, all but one are incomplete installs which I would like to delete if possible?
2.) I would like to access my files from the Windows partition, but it doesn't show up under "system." Is it for some reason impossible to access Windows files?
3.) My computer's performance has dipped substantially in the last two days. I am trying to figure out why this is, if there is a task manager or the like or a performance diagnosis tool. Also, my computer does not have an anti-virus program, that might also be the cause of the poor system performance.
I currently have a dual boot system with XP and Ubuntu 10.04 32bit.I need to do a complete reinstall of the XP and am thinking that this would be a good time to transfer Ubuntu to a bigger drive and maybe install the 64bit version. My computer is a few years old but the Core Duo should be able to handle 64bit.
I am wondering though that since I have an old printer, scanner, web cam, etc. whether I would have problems with my system running 64bit. I am also concerned as to whether the software in the library would work properly (if they are not 64bit).There is no pressing reason for me to run 64bit except curiosity so if it will cause problems I can wait.
Right now I have my hard drive partitioned, 1 with ubuntu 9.10 32 bit, and 1 blank. I was wondering if I could but a 64 bit windows 7 OS on the 2nd partition while the ubuntu partition was 32.
Better yet, is there a way to make my current ubuntu 64 bit?
I have an amd phenom ii x4 955 which is compatible with 64 bit OS but I accidentally used my old ubuntu disk with 32 bit on it.
For example, what's the minimum size required for RAM and HD.
View 2 Replies View RelatedI've just got a Toshiba NB 250 netbook pre-loaded with Windows 7.
I'm hoping to dual boot this (Windows 7) with Ubuntu. There are three partitions (sda1, sda2, and sda3) already created on the disk. I'm thinking of reformatting the sda3 drive to EXT4 and loading Ubuntu onto this drive. I'm not sure what's on sda1, but sda2 appears to have the windows 7 on it (though I'm not sure about that).
I am trying to dual boot xp and ubuntu 10.10 desktop. Everything in 32 bit. I have xp installed now and created a bootable usb with ubuntu and am trying it out now. i press install and then select my language. I then select install updates and third party software. I then get to a screen with 2 option erase disk and use that or specify partitions manually. I want the option that says install side by side, but it is not there.
View 9 Replies View RelatedJust today, I installed fedora15 on a unused partition on my comp.
Now, it doesn't give an option to boot into ubuntu at all... it boots straight into fedora.