OpenSUSE Network :: [smb] Lost Access To Shared Directory?
Mar 24, 2010
Unfortunately I haven't been able to figure out yet how to share specific directories only, so I set up my Samba server to share users' home directories (which is not a security issue here since the only possible client is my other machine). My user's home directory contains a symlinked directory on another hard drive partition, which I had to explicitly share to be able to access it from the other machine. This setup has been working for months now, but for a reason that escapes me at the moment it stopped working today, presumably after samba got updated from 3.4.2-1.1.3.1 to 3.4.3-3.2.1.
The error message on the client (Windows XP/SP3) for this one above mentioned directory, and for this directory alone, is "Access denied"; I can access all other directories fine.
View 9 Replies
ADVERTISEMENT
Mar 25, 2010
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies
View Related
Mar 1, 2010
I have a hardisk shared on my windows machine. And I would like to be able to access this on my opensuse notebook. Just cant figure it out. Dont have much experience in opensuse. I just need to know the best way to do this. Also, can opensuse read/write NTFS? Also I have a printer on my moms machine that runs XP home. The printer is shared I would like to be able to print but its no biggie. It some type of HP 3 in 1. I just wnat it to print, I dont care about the scanner and stuff.
View 3 Replies
View Related
Dec 3, 2010
I'm a Windows person and will soon be tasked with UNIX/LINUX projects. I'm trying to learn as much as possible in a very short period of time. I'm very familiar with VMPlayer and VirtualBox. Recently I installed OpenSUSE 11.3 as a guest OS on VMPlayer (bridged network). The host is WinXP. I have also enabled shared folder to the host @ CRepositoryInstalls. Question - How do I access the shared folder from OpenSUSE (the guest OS) and vice-versa?
View 2 Replies
View Related
Apr 6, 2010
I just upgraded from Suse 10.x to 11.2. Unfortunately, I didn't use 10.2 much and I('m a bit overwhelmed by the upgrade. Any advise is greatly appreciated.
After my upgrade, I lost Internet access. I don't really know my way around too well, but I did try to ping my router, but had no success. (Although I can ping 127.0.0.1).
I'm guessing that this means network access is not configured, although it looks OK to me.
View 8 Replies
View Related
May 9, 2010
Prior to upgrading from Karmic to Lucid I could access shared folders on my partners XP system. Now when I attempt to connect to the shared folder I am unable to see the folders.When I display the network I can see MSHOME but thereafter end up with the following :"Unable to mount locationFailed to retrieve share list from server"Strangely enough I am able to connect to another Lucid system easily enough from my laptop.In each instance both my Lucid systems and the XP one are connected via wireless and as far as I can see the setup on the XP system is networked OK.
View 6 Replies
View Related
May 6, 2010
Computer: Dell Latitude D600
- Ram: 1 GB
- HD: Hitachi ATA HTS541680J9AT00
- OS: Win XP Pro & Ubuntu 10.04 (Kernel
[Code].....
Upgraded from 8.04 to 10.04 and ran Update Manager. After this, sda6, the shared volume where I keep my documents, is read/write accessible from Windows, but read-only accessible from Ubuntu.
I've tried chmod and chown, but in each case, changes to permissions or group are prohibited. So is copying of files to the shared volume, and modifying files (e.g., via OpenOffice).
Additional info: Ubuntu takes a long time to boot after GRUB and during the splash, with the disk drive activity light on continuously.
View 5 Replies
View Related
Jan 20, 2011
I can access my NAS box with telnet but the file I am looking for is not in the expected directory. Of course I could go through all the directories using ls -a but that would take days. Is there a command I can run to look for the file for me using the telnet console?
View 3 Replies
View Related
Feb 12, 2011
Is it possible to give user only FTP access / browsing rights for certain directory within /srv/www/htdocs and prevent same user to browse all other directories, even user's /home directory on that server?
View 8 Replies
View Related
May 14, 2010
I upgrade the system from 11.1 to 11.2 seems everything work fine, no error no warning, after a reboot the consol show : mount error while loading shared libraries: libvolume_id.so.1: Cannot open shared object file: No such file or directory. when I try to repair the system the repair tool cannot find the root partion,
View 1 Replies
View Related
Apr 4, 2010
I am planning to build a server in future. That will be a computer with GNU. It will be a router and file server. It will get the VPN-Internet and share it with all the PCs connected to LAN. There will be Samba for file sharing. And I'm thinking that if I just share some directory on that server with Samba, it will be possible to get access to that dir from VPN. So it's not very safe to do that. Is it possible to prevent access to Samba dir from VPN connection?
View 7 Replies
View Related
Mar 18, 2010
I have an ubuntu server set up in which i would like my shared media directory to be accessable with multiple usernames / passwords because I use my admisistrator username and password for samba as well, but I do not want to give out that password to all clients in my house. And, I would like to have write permissions but keep other users to read only. Is this possible or do i need to just make one separate username / password for samba sharing?
View 1 Replies
View Related
Nov 7, 2010
Apparently after an upgrade, I lost access to my encrypted home directory. Looks like upgrade scripts changed the scripts that mounted my encrypted home directory. As I don't have my ecryptfs password handy, is there any way to revert the things back as they were? I have liked Ubuntu all the way but after this upgrade-mess-up, I might change my view.
View 3 Replies
View Related
Jan 20, 2010
When i first installed ubuntu on my laptop i could access the shared folders i had put on the network with windows through ubuntu, read and write files, copy and paste them etc. I tried recently going to Places>Network and i get this error: failed to retrieve share list from server
It never used to do this, in fact when i went to places the network was not called "network", it was my own title. i can connect to the server with the ip address, but that only lets me take files from the windows network, and not the other way around. I really have two issues
1. cannot place files on the network from my ubuntu laptop
2. cannot connect to shared folder network from places like i could before
View 1 Replies
View Related
Jan 27, 2010
So, it took me a few years to come back to Linux. Had used it MANY years ago, and have been meaning to revisit it for some time now and finally have. Tried a couple other OSs that were just, frankly, garbage. But, not Ubuntu! So far, I haven't had any of the issues I've seen posted here. I decided to use my worst system as a test environment - an old Jetta Jetbook 9450. Loaded up with no problems, most noted none of the "searching for drivers" issue that I ran into with other OSs! All that being said, I do have one question - how do I get the laptop to join my network so that I can view my shared drives? In Windows, it's simply change WORKGROUP to my network name. Been flipping through the options, and I'm sure I may have overlooked it.
View 3 Replies
View Related
Jan 25, 2010
After adding a second ubuntu variant to this machine I wanted to share the home directories so I had easy access to the same files regardless. so I read up on modifying home directories and put in the correct location and then rebooted. On boot-up the system warned me that it could not access the "shared" home directory and after a few more errors and warnings ended up at a blank screen with a mouse pointer!. All I can do is access a term window (ctrl-alt f4). So what I need is to know is where the user properties are stored so I can go and edit those from term rather than the usual way!
View 2 Replies
View Related
Sep 12, 2011
I would like to have a directory
Code:
/home/shared
Where all human users have r/w permission for all files and sub-directories under this path. Can I achieve this buy just setting the permissions correctly or do I need to do something else?
View 7 Replies
View Related
May 24, 2010
I know how to set up sshd_config for shared key only access. Is it possible however, to set up shared key only access for specific users. Example Users ABCD I want them to only be able to login with shared keys Users EFGH I want them to be able to use a shared key, or if that key gets lost, corrupted or whatever, EFGH can still use a password, keyboard-interactive. How would I go about doing that?
View 3 Replies
View Related
Feb 14, 2010
Last night while setting up wired & wireless connection in openSuse 11.2 Gnome version via YAST's ifup, I got wireless but lost wired connection (interface eth0). Dmesg shows that eth0 became eth1. I cannot get eth0 back. Is there any way to remedy this situation, eg. get info from the Ubuntu partition in my triple-boot laptop, without having to re-install openSUSE?
View 3 Replies
View Related
Feb 16, 2011
maybe everything changed while i was stuck in 10.3 but i noticed soonafter install, and am just getting around to asking:i find these directories in the system's root directory very surprising:
/.config (with one file inside Trolltech.conf, which is empty)
/.kde4
/.kde4/share (empty)
[code]....
View 7 Replies
View Related
Jun 11, 2010
Just upgraded from v11.0 to v11.2, in fact its still updating the update. I had a number of web apps in folders in my htdocs, whic I cannot access at the moment. They are still there, I just cannot Access them. Has anyone struck the same problem. I know I had this problem about 12 years ago, but being older and senile I cannot remeber what exactly it was. Real important as it contains php scripts which create xml data files for upload to web pages, so would like a quick fix if possible?
View 7 Replies
View Related
Jan 15, 2010
how to install libxcb-xlib.so.0?When I start one software and it complains that
"error while loading shared libraries: libxcb-xlib.so.0: cannot open shared object file: No such file or directory"
I have lastest libxcb1 installed and searched in my system but didnot find a relevant result.
View 3 Replies
View Related
Jan 17, 2010
I installed the latest Gimp beta and it worked fine but then I couldn't open it. I removed it and I reinstalled but it didn't work, so I installed the latest stable version (no beta) and it still does not work, when I open it form Terminal, this is the response:gimp: error while loading shared libraries: libbabl-0.0.so.0: cannot open shared object file: No such file or directory
View 3 Replies
View Related
Jul 9, 2010
I want to update all the machines in the network from a central repository which is on my master server and whose archive directory is shared through samba.I searched in the man page of sources.list and found that there is an option for this but can't able to implement this. Can anybody kindly tell me the way to do the same.
View 1 Replies
View Related
Aug 30, 2010
New XAMPP security concept: Access to the requested directory is only available from the local network. This setting can be configured in the file "httpd-xampp.conf". If you think this is a server error, please contact the webmaster.
View 9 Replies
View Related
Jul 24, 2011
I just upgraded from SuSE 11.3 to 11.4. For some reason, I can no longer access my shared drive from any other home computer. I can get out to the internet. I can ping other PCs on the network. Other PCs can ping me. My router sees all computers, and has assigned IP addresses dynamically. I have a shared folder, exported as an NFS mount point, that used to work! I've tried setting up Samba shares. Nothing! I disabled the local firewall, as my router already has a firewall running. Nothing! Nothing I've tried seems to work. I can not see that NFS mount point from any of my windows PCs. (I only have the one Linux server running, so I can't say whether another Linux box would see it or not!)
View 9 Replies
View Related
Feb 11, 2009
I am using Centos 5.2, and I installed all of the available gnome and gnome development libraries available via the "add software" menu item. Still, when running some programs, I get the following error message:
"error while loading shared libraries: libzvt.so.2: cannot open shared object file: No such file or directory"
If I understood it correctly, libzvt.so.2 is part of some gnome libs... where to find and how to install them?
View 5 Replies
View Related
Apr 7, 2010
I want to print from my linux box to my win7 pc that has a shared printer. I have cups installed and tried to add pritner using samba, but was unsuccesful, gave me an error when trying to add. The guide i followed is: Yet another Linux to Windows printing tip -- Debian Admin The printer model is a dell 2330d laser printer, it is not in cups, so i added the ppd file i got off the dell support site. I am aware that there is a native suse driver, but i want to print to the windows printer.If possible I would like to know how to do this via command line instead of the GUI.
View 9 Replies
View Related
Jun 17, 2010
I just started with my linux opensuse. I always used windows, but i changed to linux. With windows you always could easily connect with command promp to a shared file on a other intern computer. How can i do this with opensuse?
View 3 Replies
View Related
Mar 23, 2010
My USB printer is connected to an OpenSUSE 11.2 desktop on a home network. I shared the printer with samba and can print from a Windows XP notebook connected to the network, but whenever I try to connect a Windows 7 machine, I always get the message that Windows cannot connect to the printer.
View 4 Replies
View Related
