OpenSUSE Network :: Internet Access Lost After Upgrade / Get That Back?
Apr 6, 2010
I just upgraded from Suse 10.x to 11.2. Unfortunately, I didn't use 10.2 much and I('m a bit overwhelmed by the upgrade. Any advise is greatly appreciated.
After my upgrade, I lost Internet access. I don't really know my way around too well, but I did try to ping my router, but had no success. (Although I can ping 127.0.0.1).
I'm guessing that this means network access is not configured, although it looks OK to me.
After having updated unconditionally all packages in Kde-desktop-factory-repository to get the latest version 4.4.4, I can no longer connect to the Internet through Knetworkmanager. I receive the the following message from a pop-up window when clicking on the Knetworkmanager icon
Code: KNetworkManager cannot start because the installation is misconfigured.System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution.KNetworkManager will not start automatically in future.I tried opening Knetworkmanager in a terminal as root user through 'su' but received the following message:
Code:# knetworkmanager knetworkmanager(2331): KUniqueApplication: Cannot find the D-Bus session server:"Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
I just did a large patch on my opensuse11.3 system (upgrade of all installed packages), and whilst my network interface works, I cannot get past my router onto the internet.
I can connect to other computers on my network (here at home), I have an IP address via dhcp from my router, but I cannot get internet access, either from thunderbird, firefox, or simply by [URL] Clearly the computer was connected to the internet just fine minutes before since I did the large patch! Also, my other computers CAN still connect to the internet.
how i can debug it? It is just too coincidental I have upgraded everything and now somethings amiss!
If it's relevant, my router is a netgear WGR614v9.
A few things I've tried...
Code: linuxthinkpad:/var/log # /sbin/route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth1 link-local * 255.255.0.0 U 0 0 0 eth1 loopback * 255.0.0.0 U 0 0 0 lo
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
Just upgraded from v11.0 to v11.2, in fact its still updating the update. I had a number of web apps in folders in my htdocs, whic I cannot access at the moment. They are still there, I just cannot Access them. Has anyone struck the same problem. I know I had this problem about 12 years ago, but being older and senile I cannot remeber what exactly it was. Real important as it contains php scripts which create xml data files for upload to web pages, so would like a quick fix if possible?
I played with the Network Settings section in YaST, because I wanted to use the wireless network card I installed into the PCI port. OpenSUSE recognised the type of card and its MAC number, and told me that I needed to install a firmware (fwcutter something). I tried some changes on the cable internet connection (like activate on plugged) while I tried to change the wireless connection (like activate on boot).
What I have now is that my cable internet connection is not working at all (it was working just 3 days ago), my wireless internet connection is, as always, not working either. I managed to work the wireless card on Windows XP by finding its drivers.
Since the problem is with my office computer, I cannot answer the exact brand names of the ethernet card and wireless card. Shall I reinstall OpenSUSE 11.3 from the DVD I have?
Second problem: OpenSUSE does not recognise my external harddisk, it gives an error about mounting the device.
Unfortunately I haven't been able to figure out yet how to share specific directories only, so I set up my Samba server to share users' home directories (which is not a security issue here since the only possible client is my other machine). My user's home directory contains a symlinked directory on another hard drive partition, which I had to explicitly share to be able to access it from the other machine. This setup has been working for months now, but for a reason that escapes me at the moment it stopped working today, presumably after samba got updated from 3.4.2-1.1.3.1 to 3.4.3-3.2.1.
The error message on the client (Windows XP/SP3) for this one above mentioned directory, and for this directory alone, is "Access denied"; I can access all other directories fine.
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo) - error code connection failed - error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error - no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.
I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.
I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager
I am running ubuntu 9.1 on a Dell Dimension 2400. After installing ubuntu on the pc, it was automatically recognizing my router and connecting to the internet fine via ethernet. Then, my roommate unplugged the router and it won't recognize it. I can't access my router settings, and ubuntu is recognizing it as "inactive" but every other computer in the apartment runs fine. My PC uses a broadcom ethernet controller, and my router is a Linksys wireless N.
Is there a network trouble shooting guide for OS 11.2 that I could follow? I've shot myself in the foot so I should try to fix it.
I changed the DNS server addresses and the number of IP addresses on my router. I then set my Linux system to use static IP addressing and edited the network settings for my network adapter accordingly. I can now no longer get to any web-site.
By contrast, I also updated 1 of my Windows computers in a similar way; it continues to work without problem.
I am trying to get internet connection on Open Suse 11.2 through my wireless connection. I can connect to my network but there is no internet connection. The internet connection does work with other Linux distros and with Windows 7 laptop and Windows XP machines. I tried turning off the firewall but still no connection. What is even stranger is I can ping Google but in Firefox I cannot go to Google.
I'm kinda new to this, and usually i get help from a computor technician at school. BUT sins its Saturday, i cant get any help, and i realy need it. Well my problem is that i cant get any internet access using eth0 at my computer. I dont know what i have done wrong, if i have done anything wrong, it just reinstalled. ANd i dont know how to config it.
I've just had a phone call from an 8.04/win xp duel boot user who has lost the boot entry to xp after a 8.04 update. I guessed at a system upgrade but she checked and is still on Hardy. They write and only have the xp for printing as there is no Linux support for the cannon printer. Using the printer is important. I've said I'll pop round and try to sort it out. Any ideas how I can do this. Update grub in recovery mode maybe or if I need the command line what should I try? I'd like to know before calling as though I'm not quite a novice this isn't a problem I've had to cope with since grub 2 beta ( didn't solve it then either an am still using 9.04 ). Hacking legacy will be new to me. As this is a writers machine with all her work on it I'd regard it as a critical pc, don't want to mess things up for her.
OpenSUSE 11.3 x64 KDE I dont know what happened it is a new install thats been running for 2 weeks . Now for some reason I can not access the internet or the router. Samba is working with Dolphin I can browse shares on local network both Windblows and Linux and ping local IP's. But I can NOT ping my router (the default gateway IP) with this box or access it with firefox so no internet. A VirtualBox of XP Pro running on this box has no problems with its bridged adapter getting out and seeing the router. I disabled the firewall, added gateway IP to network settings, disabled ipv 6 from the get go, added service provider dns's to nameservers tried opendns servers also.
Brand new to the OpenSuse project. I'm have an old AMD Duron running 11.3 and I am having no luck in connecting to the www. I'm using a D-Link usb wireless adapter. I seem to have an IP address for the PC. here is the print from ifconfig:
I upgraded from 11.2 to 11.3, and now I can't seem to get my network/internet connection working. I am using a router and a cable modem, and the connection is of course DSL. I am using wpa2 for security. I can't even FIND where to enter my wpa2 key. When I upgraded from 10.x to 11.2, there was no such problem.
I upgraded from Suse 10.3 to 11.2, since when my Win XP box can't access the Linux files. All was OK before upgrading. The Linux (Suse 11.2) can access the Win files fine using Samba and the workgroup.
recently ran into a problem with my internet access. Im using open suse 11.2 on a Dell Vostro 1520 laptop. I managed to get my wlan running and i can use firefox to access my router. In my router the laptop is also showing as connnected, dhcp reserved an ip for it.However if i try to browse the internet, no page is loading, actually no software that needs access to the web is working.
i've installed opensuse 11.3 x86_64 and everything works great. after install updates and restart i cannot access internet from wireless connection. Knetworkmanager says it is connected, i have a dhcp ip, gateway, and cannot access internet.... i tried to configure from yast and cannot access internet...
I need to implement at my sister this kind of connection: She is connected on Local area network that has about 50-80 pc's, but for internet access she must start an pppoe connection. For now when she wants to use lan she must put her local address (ps: they dont have dhcp), for pppoe she uses dhcp. Problem is that on that way she can't access lan and internet at the same time. She must disconnect from lan and then start pppoe connection and vice versa. I'm intrested if it is possible to have lan access at the same time as internet access. some kind of tunel through lan up to isp. I was googling little and so PPPoE tunneling. Is it that what I need here?
I upgraded from Karmic to Lucid (Ubuntu 10.04) a few days ago (without backing up any data first). At first everything seemed fine but yesterday three things happened:
1. All my emails and address book have disappeared in Thunderbird. When I started Thunderbird, it took me through the wizard and seems to have overwritten my profile with a new one. There is only one profile in the Thunderbird folder and it seems to contain no emails and only a new, blank address book (the small size of the folder backs this up. I searched the hard drive but found no other emails or address book files.
2. My bookmarks have disappeared from Google Chrome. Again, it seems to have created a new, blank bookmark file. The bookmark.bak file is similarly blank and when I search I can find no other bookmark files.
3. The Pictures folder (in the home folder) is now empty; suggesting that ubuntu has either overwritten the Pictures folder with a new blank folder or deleted all the files in it. Again, when I search the hard drive for jpg files, it doesn't find any of the pictures that were in the Pictures folder.
I've been running Suse 11.2 KDE on a 64-bit Dell Studio 1535 since last week's release, and have had no trouble using Firefox. At some point today, however, it stopped accessing webpages -- or, when managing to grab a page, it would do so without full html rendering. 95% of the time I get an error splash, while the other 5% I get some sort of truncated page that looks nothing like it should. Konquer and Opera work fine, as does KMail.
I tried deleting the profile.int file (no luck), then uninstalled/re-installed (no luck), then uninstalled and deleted every Mozilla/Firefox file I could find in order for a fresh install -- but this has not worked after several attempts. I still cannot get Internet access. How to completely wipe-out Firefox in order to allow for a totally new installation?
Recently i started going into OSes other than Windows. So, i installed openSUSE 11.3 32bit on my system in dual boot with Windows7 32bit. Everything was okay But i couldn't find any drivers for my laptop. My problems are :
1. cannot access NTFS drives. 2. cannot connect to the internet through LAN 3. cannot connect to the internet through Wireless.
Computer's Configuration : Dell Inspiron 14r Intel Corei3 processor Both the operating systems run fine otherwise
I'm trying to setup a wireless AP with my old asus eeepc, so it can act as a repeater to connect my android device on the other end of the apartment. I've already created the Wireless Access Point using hostapd. It took very little configuring, just changed from mode 'a' to 'g' and changed the channel from 60 to 1 and It was all set. Next I setup a dhcp server. Also simple enough using yast.
Up to this point, I was able to connect my android device to the newly created wireless network. However It doesn't have internet access. I guess I have to configure iptables for this, but I find it incredibly confusing! Here are a few specs to help with any examples: The laptop is connected to the internet through eth0 with IP 192.168.2.120 Hostapd is using wlan0, and I'm pretty sure it created mon.wlan0 So, to sum up, when I connect my android device to the network I can, for instance, see what ever pages apache is currently serving on the laptop, but can't access the internet.
I would like to be able to monitor which programs are allowed to access the internet, but a search for programs to do this has turned up nothing. Preferably, I would like a notification to come up every time an application uses the internet. Is there any (n00b friendly) software available to do that?
