OpenSUSE Install :: Need To Remove 11.1 Only From Dual Boot Drive
Mar 15, 2010
I have a laptop with a small (dual boot) hard drive. It is a dual boot with Windows XP and Open Suse 11.1. I want to remove Suse Linux but keep the Windows side. I need to keep that Windows drive just the way it is. I have OpenSUSE 11.2 installed in another laptop and want to keep them separate. I don't want to damage the proprietary program on the windows side. My challenge is I do not have aa Windows install CD, I do have the recovery disk that came with the Laptop, but this DOES NOT include the Proprietary program I want to keep. Is there a way to remove Linux from this dual boot drive without erasing Windows?
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
I have used Ubuntu 8.04 and uprgaded to the new 9.10 both using the gneom desktop. I wanted to work with KDE and SUSE so I bought the Linux Format magazine with the DVD 126 which had SUSE 11.1 with the KDE desk top. I have a Toshiba L455 laptop and had windows 7 on 110 gb and had ubuntu 8.04 on 50 gb and ubuntu 9.10 ob 48 gb. I had ran the installer and it identified both linux systems and I selected to install SUSE in the space allocated to 8.04. It only boots to suse with the option to select windows. It showes 9.10 mixed with suse. I have not used suse. Is there an uninstall that will allow me to start over with the installation after creating a partition first. How can I get 9.10 to boot or how can I recover data from it.
I've been wanting to start using Linux for years now and after doing some research on which distro to use, I've decided to give it a try with openSUSE and ordered a DVD copy from Novel last night. Needless to say, I'm a newbie to Linux. I'm building a new computer with two identical hard drives and I'd like to install openSUSE and XP on them and hence make a dual boot system. This is also going to be my first time setting up a dual boot. So, while I'm waiting for the openSUSE DVD to arrive, how to actually set it all up?
I have a dual boot laptop Ubuntu 10.10 + Windows XP. When browsing my Windows C Drive in Ubuntu I decided to create a share to the windows "my documents" folder. The problem is that the windows drive is not automatically mounted at launch of ubuntu and as a result I get the following errors:
Code: Could not find "/media/14F0AD48F0AD30C2/Documents and Settings/Lucas Redding" and a search box is launched (See Attached Image). I have tried to look at the Samba and Nautilus settings but I am unable to find any that automatically mount the windows drive.
finally got mostly everything fixed on my opensuse 11.3. 11.3 is my only os on my laptop right now and I want to be able to dual boot with backtrack4. I used to have bt3 but it was on a usb loading up with winxp. Anyway, I've downloaded the iso image and after hours of forum reading I figured out how to mount the iso image. Doing so allows me just to look at the files. Is there an install file somewhere I'm missing?
Also, couldn't ever figure out how to partition my drive to make room for bt4. Tried downloading gparted and failed. Tried using the expert partitioner program that came with this system but it won't allow me to create another partition. Couldn't ever find a reason why. Will bt4 allow me to create a partition upon installation? How do I install?
Have older system, self-built around 2000 or so. My plan is to optimize the system for speed and utility, upgrade the OS from W2000 Pro to XP Pro, and include dual boot so as to install some version/distro (?) of Linux to learn on. Present system: X86 based (32 bit), using a P4, 1.8 GHz/400 MHz fsb, with 512mb of DDR RAM installed, can upgrade to 2 gigs total.Shuttle MV42 motherboard, including onboard video and sound (S3 Graphics ProSavage DDR P4M266/VIA 8751/8233 chipset, VIA AC'97 Audio Controller, 2.2 compliant)
If I should decide to use the available 160 gig drive as a dual boot system, in order to install both XP and some version of Linux, how should I set it up? How many partitions will XP and Linux need or work with best? How much space for each OS? What file systems? Should I format/partition it with the existing W2000 OS? What comes first, the chicken or the egg? (XP or Linux?) I have read somewhere that it matters which OS is installed first, due to boot records being overwritten by successive OS installs. I plan to keep W2000 on the first HDD at least until I move my files over to XP. Will I need to switch the master/slave designations after installing XP and Linux on the new drive, since I will want to boot from that drive?
My Toshiba Satellite 5205-S705 laptop with Win XP Home sp3 has a non-working cd drive, is riddled with viruses, and isn't capable of booting to a USB drive. (please no comments about paperweights etc., it's all I have!) I want to install a Linux dual-boot version that is heavy on antivirus scanning support. Since I can't boot to an .iso disk, is there any other way to do this? I can transfer files to it via USB thumbdrive or download via Internet.
I have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa, But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow: Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11) Processor: AMD Phenom X3 8450 Memory: 2GB Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers) OpenSUSE 11.4 KDE 4.6.0 Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured while installing GRUB ver 0.97 (640k lower/3072k upper memory) [minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename] grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5) Error 25 disk read error grub> quit
It would be convenient if i could simply install 11.3 along side my Ubuntu distro. I see yast enables me to reduce my sda1 and create a new partition, (sda3) However it offers to mount sda3 in /usr ? Could you offer me any advice please? My objective is to be able to select which distro from the grub menu.
One thing I notice and hope someone here can steer me in the right direction. When I start up my computer I have the list of options to choose from, if I choose to boot into Win 7 I am the presented again with another boot menu from windows. I would like to remove the Windows boot loader.
I recently built a new rig and wanted to make it dual boot with W7 & OS 11.2. I installed W7 and partitioned my drive with 30 gigs I anticipated using for the 11.2 install. OpenSuse will not recognize it or allow any changes to that hard drive.
ere's my issue I've got an 80GB SATA drive and a 320GB IDE drive, I've already installed Windows 7 on the SATA drive. 80 is too small (in my opinion) to dual boot openSuse and Windows 7. Can someone explain me how to use a partition from the 320 IDE to install openSuse, and how to setup grub so I wouldn't have any problems booting to Windows?
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
I have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!
I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.
For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?
Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?
How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.
By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.
I've just recently decided to try Linux, but I want to keep Windows 7 on my computer as well. This is also the first time messing with things like partitions. Could anyone lead me to a good site where I can figure out how to partition my hd, dualboot openSUSE, and fix any problems that may occur?
I am having problem here with GRUB, not really a GRUB error but the GRUB can't find the exact LMDE partition to boot. I have 4 sata harddisk with 3 OS running on my PC, the fdisk -l return
Booting into this LMDE will return error of code 15, it is the same value as it was working before, before I changed to new hdd for my LMDE. What I am trying to do is I want legacy GRUB to manages all the booting.
I have installed openSuse 11.4 and works perfectly. The main problem is, I have another system on my HD, Windows XP, and unable to boot to my XP system. If I choose Windows on Grub menu, its just show me the same text as in the menu.lst at Windows' section. I am able to boot in Windows, by adding 'makeactive' but then, I unable to see the grub menu. And to boot to oS again, I must insert DVD installer and made an update. How tiring.
Been trying this by the guess and error method for days.I know about the "Swerdna" post but it is way to difficult for me.I do this every other output from Microsoft, so it is very difficult to rememberwhat transpired. Bedsides it changes with each new distro.I'm tempted to use the VM program that Dedoimodo recommended but I don't knowhow it handles Email and urls. If they are permanent or not.
Setup: HD1 - Vista - sda HD2 - Opensuse 11.2 - No boot to MBR - sdb
i have a toshiba laptop running Windows 7 64 bit and i would like to install openSUSE 11.3 64 bit on it. I downloaded the DVD version and would like to know how i should do it.
Running openSUSE 13.1, and want to dual boot with Slackware to satisfy a long-held curiosity. However, I'm not sure how to proceed with partitioning; at the moment I have about 20gb for openSUSE root, a swap partition and the rest of the 320gb disk is home. Do I just need to add a root partition for Slackware, or are things more complicated than that?
My main os, albeit only because of gaming, is windows 7, and I was looking to dual boot with 11.3. I couldn't find any documentation of this, so here it goes: Does the executable on the 11.3 disk install opensuse like wubi does ubuntu?
I've been googling and couldn't find solution to my problem. In the past I was able to get around dual boot with Win XP but that Win 7 seems to be more resistant to dual boot. I have a Toshiba Portege T110 that came with Win 7 home edition. I parted the hdd using gparted and put Linux on extended partition. It was OK up till then. After installing Opensuse 11.3 and installing Grub in extended partition, grub came up but when I chose windows, I got error from windows boot manager saying it couldn't find winload.exe. I tried to manipulate the grub by typing:
After rebooting, grub came back but when I tried to access win 7, I again got the black screen saying my winload.exe is missing. I'm reinstalling my win 7 for the 2nd time now. But I'd still like to get the dual boot with Opensuse 11.3 to work. What have I done wrong? Should I put grub in MBR or the mount point / ? or should it be left alone in extended partition? And how do I move grub to different place?
