Fedora Installation :: Boot Selection Menu, Get A Grey Screen With A White Cursor, And The System Freezes?
Dec 4, 2010
I'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
View 3 Replies
ADVERTISEMENT
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
Aug 27, 2011
I downloaded a debian whezzy media after installation when the system begins to boot the system appears a white screen, and not from any error.
View 2 Replies
View Related
Jan 7, 2009
I have a Gigabyte GA-MA790FX-DS5 with an AMD Athlon 64 X2 and 4GB RAM. The MoBo does not have embedded video. My main video card is a Diamond Radeon HD3650 PCIe. I was unable to initially install F 10 as the screen would blank out (Black Screen) after it would start Anaconda. I attempted to boot using the suggested option of nomodeset with no change of symptoms. I then switched out to an older PCI video card (NVIDIA GeForce FX5200) and was able to go through the install. Now I am attempting to switch back to my preferred card (HD3650) and just before the GDM screen appears the screen goes to solid white and no ability to switch to another VT. I have been unsuccessful at finding any workarounds for this. I thought the issues were with the older proprietary chipsets pre open source of ATI which was supposedly older than the R500 series, but I guess I'm wrong.
View 1 Replies
View Related
May 6, 2010
I'm running an Acer 1810Tz, dual boot with win7.Under 9.10 and Grub I had no boot issues, however I have just completed the upgrade to 10.04 and upgraded GRUB to GRUB2.Everything boots just fine into Ubuntu, and my GRUB menu looks right, but when I select the Windows 7 option, the machine just hangs with a black screen, white cursor top left. I'm sure this is a trivial problem, something overwritten that shouldn't have been perhaps, but I have no clue where to start.
View 6 Replies
View Related
Jun 14, 2011
I'm trying to install Fedora 15 from a USB stick. I can boot off it just fine, but most of the menu options don't work:
Boot => Freezes indefinitely
Boot (Basic Video) => Freezes indefinitely
Verify and Boot => Freezes indefinitely
[code]...
View 1 Replies
View Related
Nov 7, 2009
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
View 2 Replies
View Related
May 1, 2010
1st install no good, but did second to fix some possible mistakes.Booted to login prompt and then, after login, nothing until entered telinit 4, then scrambled screen, then changed to probably the normal screen background of grey/white with numerous white globes, but nothing else and cursor moved, but wouldn't function on occasions also got box with login name, password locations.Got message of "Display not set" and that the problem was so complex it couldn't be explained with these minimal resources.Did third full install and changed screen option from my known resolution with framebuffer, to safe standard, but no improvement.Lilo was installed to MBR, and had 2 partitions flagged as bootable (/ and /boot).Found nothing on forums or FAQ, but suppose could give change of kernel a shot, but as used what cd started with, that seems unlikely.
View 6 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Mar 4, 2010
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
[URL]
View 3 Replies
View Related
Jul 9, 2010
I have here two old identical compaq pc's with 64mb ram.I want to copy drive/os from one machine to other. So i do a drive to drive clone (witn both hd's deing connected to another machine). And it says its done and okay. But the second (cloned) machine doesnt boot. And have the black screen with the blinking white cursor in top left corner. I have already tried to do fdisk /mbr and also copying partition table from original to destination disk. Because i think it is logical that with a drive to drive clone it sould be copied. But i have a doubt in that somehow. Because why would it not boot if it was copied then
View 9 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Mar 12, 2009
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
View 2 Replies
View Related
May 13, 2010
10.04 was working fine till one day I boot up, and there's a weird grey screen. I hear login sound, but nothing is displayed on the screen, it just goes grey with weird shapes and sometimes color stripes. Sort of like grey screen of death...
I thought I would recover my nvidia drivers, but I get the same grey screen when booting from Live CD also. Even from ubuntu recovery remix. Ubuntu Live CD launches, I get a menu, but when it starts to boot, grey screen again.
View 7 Replies
View Related
Feb 23, 2010
I recently downloaded Ubuntu 9.1 and burned it to a CD. However, I can't seem to get it to boot. I got to the main menu and selected to run it directly from CD, and the Ubuntu symbol showed up saying it was loading things, but then the screen went black and nothing happened even if I waited over 15 minutes. During this time the HDD light was flashing every second or two, and I could see about three white pixels at the top most row of the screen.
View 8 Replies
View Related
May 11, 2011
I recently Installed Ubuntu 11.04 on my Compaq evo n800c
CPU-Pentium 4
RAM-1GB
HDD-60GB (yeah i know, it's old)
GPU-ATi Radeon Mobility 7500
Installation went fine but when I boot in Ubuntu I get a MS-DOS like workspace that asks for my login and password. When I give it my credentials,it just says welcome in text and thats it. Now if I go into recovery mode and choose any of the options [normal boot/failsafe-graphics boot] the screen goes completely white. I spent hours searching Google for a solution but nothing worked. what is the problem and also what will be the solution for it.
View 3 Replies
View Related
Nov 2, 2010
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
View 9 Replies
View Related
Jul 17, 2011
Every once in a while when I turn on my computer it freezes on the purple screen after the screen where you choose the operating system. When this happens the keyboard doesn't work and I have to hold the power button. Also I think this might be connected to the problem I had when I was running ubuntu from the live cd, which was freezing after choosing the option of "trying" the OS before installing. I'm using an HP Dv7-3112sa and am running the default 64bit ubuntu from the website.
View 6 Replies
View Related
May 15, 2011
I've been unable to resolve this problem for the past weeks and have come as far as I can trying to fix it on my own. I have a fresh install of 11.04 on a Shuttle ST20G5 with a Radeon Xpress 200g chipset. After 5-10 minutes of usage in X, it freezes solid (no response to alt-sysreq) and displays a white screen (sometimes with a pattern). I believe it's a kernel issue.
Things I've tried but still resulted in crashes:
- Switching to VESA graphics
- Running failsafe / Recovery Console X
- Downgrading X server to 2.09
- Running latest X server via ppa (at least, I think I did this. Maybe I didn't)
- Upgrading kernel to 2.6.39-0 via ppa
- Running the live cd
I get no warnings or errors of note in xsession-errors or kern.log
I have not been able to catch the error or obtain any troubleshooting info. When it crashes, it just crashes.
View 3 Replies
View Related
Feb 27, 2011
10.10, and I am havingn interesting issue.During boot, right after POST and right before the bootloader screen with the progress bar and Ubuntu logo, my monitor goes completely white. However, almost instantaneously it starts to fade to black, and eventually goes away. I know it's not the white screen of death that I've heard about, because next I can log in and use my computer just fine.If anyone could point me in the right direction to try to fix this, I would greatly appreciate it. Even filenames related to Ubuntu boot would help, as I'm still learning.
View 4 Replies
View Related
Mar 25, 2011
I'm having difficulty upgrading from 6.06lts to 10.10.
I have downloaded and burnt a cd, however it freezes on any option from the boot menu. I've tried the various options to no avail.
So i then tried a frugal install using unetbootin however when I try bootin through that using the 10.10 iso it comes up with this
Code:
My computer cannot boot from a usb. I have tried.
View 9 Replies
View Related
Aug 4, 2011
Just curious if there is any sort of issues with Ubuntu and JBOD assignments. I had my 2 500GB hdd's as JBOD through my mobo BIOS/RAID Config and it didn't like it. It installed just fine and showed the hard drives separately. I really didn't think anything of it so I continued on.After the install completed successfully, and I rebooted the system, it came to a blank screen with a blinking cursor and wouldn't continue on. So I tried restarting a few times, no luck. Finally I was like "okay screw this, going to install with no RAID setup or JBOD setup." (had RAID issues last night. rabble rabble) Removed RAID configurations and BAM started right up..S. Semi-new to Linux/Ubuntu. Know the basics and what not, just not some of the more advanced stuff.Edit: Okay, so I restarted my computer and removed my USB drive (which I had installed Ubuntu from) and it didn't boot. So it was NOT an issue with JBOD. Guess I'll look for a resolution for that, though.
View 2 Replies
View Related
May 19, 2010
I'm trying to install Ubuntu 10.24 at a computer running Windows 7. Here are 2 scenearios, with the same result:
If I boot from the Ubuntu CD and try to install it, the wizard is freezed at the keyboard layout selection. I'm able to select my keyboard, but after I press Forward, the button is greyed out and nothing happens.
If I press cancel, I load the Live CD and retry the installation from there, selecting the shortcut "Install Ubuntu 10,04 LTS" from the desktop. Everything goes fine until the keyboard layout selection. Just in case, my keyboard is a USB Microsoft Natural Ergonomic Keyboard 4000 and it works perfectly fine in Windows 7 and in the Live CD.
View 3 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Jan 14, 2009
complete trying newbie trying to get to grips with linux. Tried ubuntu and didnt like that so someone suggested fedora. I'm having the same problem I had with ubuntu, I get a white screen when trying to load the graphical install after the media test. On ubuntu this was solved by selecting simple graphics mode. Here I have tried the following commands during install with still no luck
The text install just freezes after selecting the keyboard layout so that does not even work. Tried searching for forums but only solutions I could find where the previous.
View 7 Replies
View Related
Jan 25, 2009
I get a blank white screen when i try to bootup fedora and ubuntu to install them. I don't know whats wrong, any ideas?
View 1 Replies
View Related
Jan 27, 2009
I was able to install fedora 9 just fine. But now when I go to install fedora 10 right after the anaconda installer starts the screen goes white.
View 1 Replies
View Related
Feb 1, 2011
I tried to upgrade to Maverick (server version) usingsudo do-release-upgradeAll went well, but on the first reboot after the installation the PC hangs with grub prompt:error: the symbol grub_xputs not foundI guess it has something to do with my RAID1 setup:sda1/sdb1..RAID1, bootable (system partition, 20 GB)sdc1 ....swap partition sda2/sdb2/sdc2 ... RAID5 (data partition, 3 TB)I made a bootable (using UNetbootin) USB pen drive with 10.10 desktop on it and booted into this desktop version. Aftermdadm --assemble --scanI could successfully access (and mount) my RAID1 and RAID5 drives. However, the system itself does not boot.
after only having mounted /dev/md0 and browsed in the contents, the boot behavior has changed: now the PC does not end up in the grub prompt "the symbol grub_xputs not found", but instead a blank black screen with a blinking cursor left top is shown. Keyboard: no reaction (I tried Enter, Esc, any keys ... no reaction, just a blinking cursor).Then, I tried:
boot into USB pen drive 10.10 desktop
mdadm --assemble --scan ... result: /dev/md0 is available (the RAID1 of sda1 and sdb1)
mount /dev/md0 /mnt/md0
[code]...
View 8 Replies
View Related
May 30, 2011
When i try to install Fedora 15 on a clean machine it freezes as soon as the pixelated load bar with the white, light blue and dark blue colors show.
I have tried several different versions of Fedora (64bit and 32bit) and have tried to burn it to a CD and/or DVD (For the larger version) and copying it to a usb pen with universal linux usb, liveUSB creator (from Fedora) and last one i don't remember the name on.
View 1 Replies
View Related
May 1, 2010
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
View 5 Replies
View Related
