I want to connect Fedora 9(laptop-2) to the Fedora 9 GUEST(laptop-1).
1. Which Adapter should I use in VirtualMachine's settings?(Bridged OR Host-only)?
2. How should I do this? i.e. Please tell me the steps.
When I create virtual ethernet interface and do a ping -I <v_int> <host> the outgoing address is the one of the physical interface and NOT the virtual interface.Is there no chance that trafic will go out with virtual interface address??Incoming trafic is done well i.e. responds to the virtual interface have the virtual address.
My problem is that I have 2 modems and want to check both default gw behind the modems.
If I do a "normal" ping both are reachable over default route even the modem which is not the default route will not work because ping goes over the working modem.So I have 2 routing tables and want to route the virtual interface to one modem the other to the other modem
I have successfully installed Slackware though in virtualbox.I thought to learn first before falling into any pitfalls. Will do hard disk installation after learning more in virtualbox..But, I see now that I can't connect to the internet in the virtualbox... The host OS is Windows 7 and Virtualbox guest additions are installed and configured too.
View 7 Replies View RelatedI have a main Ubuntu system and a virtual Windows system, set up using QEMU/KVM. So, I can start Windows using virt-manager and connect to it using a VNC client.But what I really want to have is a new Xorg display that is connected to this Windows system, so that e.g. CTRL-ALT-F8 shows Ubuntu, CTRL-ALT-F9 shows Windows. That'd be a real alternative to a Linux/Windows dual-boot setup.
I know that GDM had some option to connect to another X server (XDMCP), but I couldn't get this to work with GDM2/Ubuntu 10.4. Would this somehow also work to connect to a VNC server (like the virtual Windows system)? how to make Xorg provide a display for incoming VNC connections, but nothing on how to do the opposite.
im a newbie in this of linux. I want to have a linux virtualbox with DB servers like Oracle, MySQL, PostgreSQL and so on, so i installed Fedora in virtualchine of virtualbox. In the network configuration i set the Bridge Connection to enable Fedora to get IP from DHCP and it works fine. After that i've installed Oracle 10G Express and it works fine, i can connect without problems to oracle admin web application from Fedora. Previously i checked if port 1521 is open on fedora so when Oracle is running i use nmap and i get this:
Code:
nmap locahost
Starting Nmap 5.21 ....
[code]...
I have installed virtual Redhat in Redhat using Xen virtualization. The ip of the virtual OS is 192.168.0.3 and of main OS is 192.168.0.2. But even then I apply "ping" command then "Destination unreachable" error occur. How to connect virtual and main Redhat!
View 5 Replies View Relatedyou add a rule which allows a virtual machine to connect to ssh on the main fedora host?so connecting from a virtual machine to the main fedora host installation? I think i have to use an iptables command but not really sure
View 3 Replies View RelatedI have this old Toshiba Tecra 730CDT laptop, pretty useless with it's 150MHz Pentium processor and 48MB RAM. I am considering to throw it out for good. But, before I do it, I wanted to hear maybe it is still possible to use it:
1) perhaps there is some really thin linux distro that would let me to connect to a virtual PC on a server, transmit the mouse and keyboard events, and get the image and sound streamed back.
2) Maybe there is some other smart use of such gear, like installing it in car or something. I doubt it though, because it's heavy (8lbs~3.6Kg), bulky and energy-inefficient. But still... it's so hard to accept that such smart pile of electronic must go to the junk yard.
I installed Oracle Enterprise Linux on Virtual Machine.
I try now to connect to internet through this VM but i cannot.
How can i make connect?
I installed VMware player and installed windows xp on it, but i can't connect it to the internet. I tried NAT mode and when i click connect, it shows me the error "Could not connect Ethernet0 to virtual network /dev/vmnet8" . If i select bridge mode instead, it connects successfully but i am not able to get an internet connection then and can't ping any ip except 192.168.1.1 .
View 3 Replies View RelatedI'm attempting to use a network bridge to connect my virtual machine, like so:
[Code]...
The issue is that when I type the following command, I get the further following horrible error message that doesn't seem to really point me to anywhere and I can't seem to find any relevant information to my problem on the web:
root@darkstacks:~# qemu-system-i386 -hda test.img -m 128 -curses -net nic -net tap,ifname=tap0 warning: could not configure /dev/net/tun: no virtual network emulation
Does anyone have any idea what I need to do here? My processor does not have the vmx flag, as it's a 2.4GHz P4. I don't know if that might have something to do with it.
I've a Windows 7 host OS and I've installed Fedora 11 as a Virtual OS using Virtualbox.I want a friend of mine to connect to my Fedora server using telnet from internet. What I would like to know is how do i configure my Virtualbox to allow my friend to connect to my server. Also, is there any setting I need to change in Fedora to allow this?
View 9 Replies View RelatedSince a few weeks I cannot open a console in vmware server 2.0.2 anymore. I don't know exactly when this started because I use vmware only occasionally (I have only 1 program (an old Ashlar DrawingBoard) which does not run properly in wine). VMware server and the console have been working before without problems, but now I get the message "Cannot connect virtual machine console." and it times out. This is on Opensuse 11.1 with VMware Server on the same pc, Firefox and the guest is Windows2000.
I have tried to disable all extensions in firefox 3.6, disabled the firewall, even created a new user (on the same pc) with a clean firefox, all without any result. However when I connect from a different computer which runs Internet Explorer under windowsXP, then I can get the console without problem.
So, somewhere there is something wrong between Firefox and VMware server.
How can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
View 5 Replies View RelatedI have a virtual private server that I am trying to connect to using x11vnc. I ran this through ssh to setup gnome
sudo apt-get install gnome-core
sudo apt-get install gdm
sudo /etc/init.d/gdm start
sudo dpkg-reconfigure xserver-xorg
I later ran sudo apt-get install ubuntu-desktop to see if that would help.
Code:
#cat /etc/issue
Ubuntu 10.04.1 LTS
l
Code:
#sudo startx
Fatal server error:
xf860OpenConsole: Cannot open /dev/tty0 (No such file or directory)
I assume this is because it probably doesn't have a video card.
[Code]...
I've set up a server running Ubuntu 10.10 (desktop) with apache. Problem is: When I try to configure multiple virtual hosts I can only access the first one. I'm sure that I'm missing something basic in my setup, but I cannot seem to figure out what.
What I want is simply two virtual hosts, one only available on the LAN where I can test my php files and one "live" available from the outside.
Heres what I've done:
Installed Apache2.2
Copy /etc/apache2/sites-available/default -> /etc/apache2/sites-available/dev
Modified "dev" config DocumentRoot and Document to point to /var/www/dev
Modified "dev" config VirtualHost to <VirtualHost *:1337> (port change right?)
Modified "default" config DocumentRoot and Document to point to /var/www/live
[Code].....
Live works fine, but dev cannot connect (as if there is no server there).
It complains that it can't connect to localhost because probably libvirtd is not running. Well it is running, so please share your wisdom with me. Here is error message:
[Code]....
I've been learning linux for a while now with half an eye on making a career out of it in future. One sizeable gap in my knowledge at the moment is networking. Is it feasible/desirable to set up a network of virtual machines to use as an environment to learn networking? My budget is non-existent so I was hoping to be able to get a basic understanding of the principles from installing a few desktops, a virtual gateway etc on VMware workstation on my laptop, and doing a lot of reading online.
Is this feasible, or will I just end up learning about virtual networks instead of real ones? Also how much power would be required, because my 3GB RAM lappy has just gone bang and all I have now is a (new) 1GB RAM lappy.
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies View RelatedMy wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedI am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies View RelatedI'm trying to connect one computer to two others in an ad-hoc infrastructure.
[computer 1] ---- [computer 2] ---- [computer 3]
computer 2 is running Linux and has a single NIC wlan0. I want to it to connect to both computer 1 and computer 3 so each computer can talk to the other. No switch is available so it needs to be an ad-hoc setup.
[Code]...
I had put my computer on standby and when i restarted it, it powered off within a few seconds. I turned it back on and after that i've lost connectivity to internet on Ubuntu 10.04.
However I have VMware (XP) installed and internet/network works on that. I'm a newbie with Linux.
Here are some outputs:
I have tried to edit the connection using System>Preferences>Network Connections. I entered manual settings for IPV4, but whatever i enter there, it doesnt get reflected when i type ifconfig in the terminal window. I tried setting it to Automatic DHCP as well. Doesnt work.
I can not connect to wifi networks, i can see them but not connect.
My wifi device is:
I have recently installed ubuntu 11.04 on my asus eeepc1005hab. And I've had problems with the wifi. I can connect via ethernet, but the wireless won't connect. I can see the connection, but my wifi never connects. I've tried many things but it still won't work.
View 9 Replies View RelatedI use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
I've recently set up a local development webserver using Karmic Koala. I downloaded and installed the server version of Kubuntu and have the web server working.
The problem is that for some reason, I'm no longer able to connect to the internet. I can connect to my router, and other machines in my network can VNC into the server.
I'm using an wired connection to the router and have the server set up on an internal IP of 192.168.0.100. I used to be able to connect to the internet, I downloaded and installed a load of packages etc before it stopped working.
The last thing I remember doing before it stopped working was that I installed Samba so I could share files with the other machines on the network (two Macs running Leopard and a WinXP laptop).
I got the share working - I copied a load of files to the server via the share, rebooted, and for some reason now I can't connect to the net (and other machines can't see the Samba share either.) However I can still VNC into the server.
