Ubuntu :: Xubuntu Setting Up Your X - Display ?
Nov 9, 2010
I noticed that after certain installations in Xubuntu/Ubuntu and many other distro, some of the times the distro will load the correct video module and resolution for the most part but in others we are stuck in messing with the xorg.conf file. I have observed that in the newer distros they dont use xorg.conf anymore and have steered toward xrandr.
My question is:
1 - If after an initial install you have no video and you know what hardware you have, how would you use xrandr to configure the machine to boot with the correct resolution and setting?
2 - I also read that you can still use the xorg.conf, would this still be the standard method of setup?
View 7 Replies
ADVERTISEMENT
Nov 9, 2010
I noticed that after certain installations in Xubuntu/Ubuntu and many other distro, some of the times the distro will load the correct video module and resolution for the most part but in others we are stuck in messing with the xorg.conf file. I have observer that in the newer distros they dont use xorg.conf anymore and have steered toward xrandr. My question is:
1 - If after an initial install you have no video and you know what hardware you have, how would you use xrandr to configure the machine to boot with the correct resolution and setting? 2 - I also read that you can still use the xorg.conf, would this still be the standard method of setup?
View 1 Replies
View Related
Aug 13, 2011
I messed up my Compiz configuration so I can't use the Xubuntu Desktop anymore. I know what caused the problem, so I simply need to know:In which file is the Compiz configuration stored in Xubuntu?The Ubuntu-Session is not affected, that makes me sure that there are different compiz-config-settings files for Ubuntu and Xubuntu.
View 1 Replies
View Related
Jun 26, 2010
I just installed Xubuntu 10.04 Lucid Lynx on an Intel 1.5GHz, 500 MB RAM, 128 MB video card system, 80 GB hard drive (it's a 5 year old system)....My system meets the requirements according to this [URL]
But for some reason, things aren't displaying correctly. The best way to describe it is that it's almost like Xubuntu can't "repaint" the graphics correctly. So I see distorted lines or text that doesn't render completely.
View 2 Replies
View Related
May 13, 2010
Is there a GUI that will allow me to set a default file manager for Xubuntu? I would like to use the Nautilus File manager. Right now I access Nautilus from a launcher I have on my Panel. I would like to have the ability to switch file managers, set defaults etc...
View 1 Replies
View Related
Jan 19, 2010
I just installed Xubuntu 9.10 on my iMac and it works perfectly...except for one thing. It is stuck in 8 or 16 bit color and I can't find a way to make it millions of colors. I've tried using the xorg.config...
View 1 Replies
View Related
Sep 1, 2011
I just installed Xubuntu 11.04 via wubi. Whenever I would attempt to do a normal install, the graphics would seem to crash and the screen would become distorted and basically just blocks of black and white. So I tried to do it in graphics safe mode, which succeeded. However, now I cannot start the Xubuntu GUI, and I get the error message "Display not found".
View 1 Replies
View Related
Feb 1, 2011
At home, I am running Ubuntu 10.04.1 LTS with openssh server OpenSSH_5.3p1 Debian-3ubuntu5 In my office, we are using CentOS 5.5 with openssh OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 Both my /etc/ssh/sshd_config at home and my ~/.ssh/config has X forwarding enabled.When I log in to my home machine from my office with ssh -X -vv host, I got the following:
Code:
debug2: x11_get_proto: /usr/bin/xauth list :0.0 2>/dev/null
debug1: Requesting X11 forwarding with authentication spoofing.
debug2: channel 0: request x11-req confirm 0
But once I log in, I get:
Code:
home:~>echo $DISPLAY
DISPLAY: Undefined variable.
I tried setting DISPLAY to localhostx.0 (xx from 0 to 10) but none of that works. I have also tried ssh -Y but the result is the same.
View 4 Replies
View Related
Jan 12, 2010
i was using GDE in my ubuntu system. But yesterday i did some thing so my ubuntu system has changed as debian. My login screen changed and i cant access "system->administration->Login window"when i do this i am getting this error message"GDM (GNOME Display Manager) is not running.You might be using a different display manager, such as KDM (KDE Display Manager), CDE login (dtlogin), or xdm. If you wish to use this feature, then your system will need to be configured to use GDM instead."How to come back to my normal original ubuntu with GNOME.
View 3 Replies
View Related
Jan 5, 2010
I am new to Ubuntu (Karmic with GNOME). I have a Samsung LED UEB7020, with an Asrock ION 330 BD player feeding to a Onkyo TXSR607, AV rec. The other day I downloaded NVidia v180.25, which was very useful, because it immediately solved an earlier teething problem of no sound. However immediately upon re-booting and ever since, the screen size is too big for the TV, meaning that I can not see the top, bottom, side and left of the display by about 2 inches either way. I have checked the NVidia resolution settings and they are correct for the TV, ie 1920 by 1080.
My etc/X11/ xorg.conf file reads as follows:
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Default Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
View 9 Replies
View Related
Mar 17, 2010
I have extended desktop working on my netbook (finally, by turning off compiz), but now Gnome prefers my netbook's main screen as the main display (with the panel and such) instead of my external monitor.How can I switch this? I don't see any setting for it in the Display dialog.
View 3 Replies
View Related
Jun 26, 2010
hen it loads up ubuntu, it automatically detects the settings and resets, but my tv says it can't display the video. I have an old CRT monitor I hook it up to to be able to change settings, but it won't let me change the settings in gnome for the TV. I think the settings it will need to have for the video card hooked up RGB and television would be 1336x768, is there a way that I can program that to where it doesn't automatically detect the monitor?
View 1 Replies
View Related
Jan 12, 2010
I was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
View 5 Replies
View Related
Jan 12, 2010
I was using GDE in my ubuntu system. But yesterday i did some thing so my ubuntu system has changed as debian. My login screen changed and i cant access "system->administration->Login window"
when i do this i am getting this error message
"GDM (GNOME Display Manager) is not running.
You might be using a different display manager, such as KDM (KDE Display Manager), CDE login (dtlogin), or xdm. If you wish to use this feature, then your system will need to be configured to use GDM instead."
How to come back to my normal original ubuntu with GNOME.
View 1 Replies
View Related
Aug 19, 2010
I have an ASUS 1000HE laptop running Lucid 10.04 (Desktop not netbook version) which I have connected to an external display (LCD). I don't intend to use the laptop by itself anymore therefore I have configured the display properties to turn off the laptop display and use the external display as primary. However, when the PC enters 'locked mode' or the display powers down after a defined period of time (as set in the properties) when I wake the PC and the display, it turns the laptop monitor back on .... switches the laptop screen to primary display (i.e. with the panels etc displayed on it) and extends the desktop to the external display! The only thing I can then do is go back into the configuration utility and turn the laptop monitor off again and boom, everything is fine and dandy displaying on the external display again! I don't really want to have to do this every time I come back to the PC after it has been locked nor do I want to write a script (if it can be avoided) to deal with it!
View 2 Replies
View Related
May 16, 2010
Not sure if I'm doing right to post this on this thread but I've got an issue with my laptop screen extension. I have plugged a vga monitor to my laptop for a right display extension. The idea is to put the right extension on the vga monitor but don't why the monitor is know my main screen and my laptop the extension. I have tried to change sides but the laptop is still the extension and not the main one as I want.
Is there a hard way to make this work?
Notes:
Video: ATI HD2300 with fglrx drivers.
KDE 4.4.3
Trying with ati catalyst panel and preferences-screen options
View 7 Replies
View Related
Nov 26, 2010
Installed 11.3 KDE today on an old Vaio desktop we were given (Duron 900Mhz, 512mb, 40Gb HD, SiS630 onboard video, Trinitron 15" monitor). Everything works fine except it will not save the 800x600 resolution setting. Every time I reboot it is back to 1280x1024 which it thinks is the default resolution. Any tweak to get 11.3 to save that setting?
View 4 Replies
View Related
Jun 9, 2010
I am connected to work via a VPN. I am logging into a Solaris box at work from OpenSuse 11, using ssh -X. I would like to start a GUI on the solaris box. The problem is that I don't know what value to give the DISPLAY variable. Is it the local internal LAN ip address, for my machine? I did try that, and I tested it using, xterm on the solaris machine. It says it can't open the display. I have enabled remote connections on my machine using xhost +.I have to run a performance test on the Solaris box at 7am in the morning... so need to find out how to start the GUI
View 6 Replies
View Related
Mar 16, 2010
After manually setting the display brightness on my laptop, the system re-sets the value. If the laptop is plugged in, the value is set to full brightness; if it is not plugged in, it is set to dimmer. How do I stop that behavior?
Note that I am not talking about what it does in response to the event of plugging in or unplugging my system. It changes on it's own - usually several minutes after I change the brightness value. I have observed this behavior on different systems, different distributions, and different desktop environments.
View 1 Replies
View Related
Feb 13, 2009
New install PCLinuxOS, and the max resolution setting is 1024 x 768 (too low).
What do I need to change to reset the options? xorg.conf file??? Where's that?
View 2 Replies
View Related
Jan 11, 2010
i was using GDE in my ubuntu system. But yesterday i did some thing so my ubuntu system has changed as debian. My login screen changed and i cant access "system->administration->Login window"when i do this i am getting this error message"GDM (GNOME Display Manager) is not running.You might be using a different display manager, such as KDM (KDE Display Manager), CDE login (dtlogin), or xdm. If you wish to use this feature, then your system will need to be configured to use GDM instead." How to come back to my normal original ubuntu with GNOME.
View 1 Replies
View Related
Jan 19, 2016
I am just trying to setup my debian 8.2 stable in my Intel(R) Atom(TM) CPU N2600 @ 1.60GHz. The installation goes smooth without any issues. For this system , we are planning to use DUAL display with HDMI & LVDS.
We see that that only HDMI is working and LVDS screen is blank. However, we notice that XRANDR is is showing LVDS as connected
XORG.log:http://pastebin.com/LX9HhRui
KernlogINfo:http://pastebin.com/U2E09iZk
lspci:http://pastebin.com/eBC8wLVu
xrandr:http://pastebin.com/bS5NmAnQ
dmidecode:http://pastebin.com/2qSsHE1s
View 5 Replies
View Related
May 19, 2011
Despite having the Gnome Power Manager set to put the display to seep after 30 minutes, it always happens after 5 minutes. The display will go blank but still lit, and then it powers off after the 30 minutes. Surely, if I set it to 30 minutes, the display should power off then, and not just blank after 5? I have no screensaver packages installed so it's nothing to do with that.
View 2 Replies
View Related
Jul 28, 2010
System won't retain 16:9 display size setting in YaST (SaX2). I'm using SuSE 11.1 (64 bit).
SaX2 settings as follows:
Monitor is Samsung Syncmaster XL2370-1 (digital). Resolution is set to 1920X1080 (1080p). Diagonal measurement set to 23 inches. Display size indicates 509 m.m. X 286 m.m. (20 3/8" X 11 1/2").
Aspect ratio is entered as 16:9, but after saving and restarting computer it keeps coming back as 16:10.
Samsung literature says 16:9, and measurements above confirm this.
So why does it keep going back to 16:10, and how can I get it to retain 16:9? (Same thing happens on another computer, also running SuSE 11.1, and with a second of these same monitors.)
View 9 Replies
View Related
Apr 15, 2010
Normally I use disper to enable my external monitor, but I don't think I can force the 2nd monitor to be primary. [URL]
I've played around with nv-control-dpy included in the nvidia-control source, but I haven't figured out how to do it yet. How to get: [URL]
This is a laptop, to which I connect an external hdmi display when I get to work. dipser -e extends the desktop for me, but the laptop remains the primary desktop (holding the panels etc). nvidia-settings can set primary monitor for me, but I want to use the cli.
View 4 Replies
View Related
Nov 20, 2008
I am running Fedora 9 in virtual box on laptop. Want to set Fedora display size so that I will not have to scroll up or down or sideways to view screen contents. Have tried a couple of options such a resize box and change from full size but these do not help reduce size of Fedora display. Am wondering if it as something to do with the rectangular size of laptop monitor???
View 5 Replies
View Related
Nov 17, 2010
i installed Xubuntu on my system having a dual boot with Xubuntu and windows xp but when i select to boot on Xubuntu it freezes and gets a message saying that the file hal.dll in system32 cant be found. Before showing me this message i tryed to uninstall the Xubuntu inside from windows xp because several problems showed up after installing Xubuntu. I can boot on windows xp but i cant boot to xubuntu and cant uninstall xubuntu.
View 1 Replies
View Related
Jun 28, 2010
How to install oracle? I have been tried many times but seems can't resolve the DISPLAY issues.
All installer requirements met.
Use the following command to view the current DISPLAY environment variable setting:
View 2 Replies
View Related
Jan 8, 2010
Hi I am new to ubuntu and am having major problems setting my displays up. my setup is a hd TV to the Left of my pc monitor, i have managed to configure catalyst to let me have a main display with the second display being an extension of the first, the problem is i cannot seem to swap my primary display, at the minute my HDTV has all the taskbars and everything on it while my pc monitor is just a blank background, i would like it so i could start a film playing for my children, then drag it across to the HDTV while i can still use my pc in the background.
View 1 Replies
View Related
Jan 28, 2010
I am using GeForce 7600 GSNot using the Nvidia X driver message you know... I searched all over, and seen this problem on many searches but no resolve issues.I want to be able to connect my tv, I use to be able to when I first installed Ubuntu and now IdK.
View 3 Replies
View Related
