I recently made an Ubuntu 8.10 partition on my windows XP Latitude E5400. Using windows xp I can connect to my dlink wireless network that is not protected. Using Ubuntu 8.10 I can connect to my neighbours wireless non-protected network, however my own dlink network is not shown in network manager and I can not connect to it?
View 1 RepliesI am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
i looking to replace network manager on my laptop with another wireless program. iv been looking at Swscanner, Rutilt wlan manager, and wicd network manager. iv had trouble with network manager not being able to connect or losing connection fairly easy. im using a gateway m6843 running ubuntu 10.04 32 bit os.
View 2 Replies View RelatedOur corporate wireless network uses continuously changing passwords with RSA tokens.So every time we need to connect to the wireless we need to enter a new password off the RSA token. For extra fun using the wrong password a couple of times in a row causes the users account to be locked.Network manager automatically stores and reuses the password, with the net result that it is constant getting my account locked.Is there some way to prevent it from storing my password for that network?
View 1 Replies View RelatedI recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
View 9 Replies View RelatedWhen I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.
I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.
I happened to Fedora 13 that the network manager does not indicate any wifi network and I had to turn off the notebook for a while and then recover, this also happened to me 2 or 3 times on ubuntu 10.04 too. my card is an Atheros AR5007EG.
View 2 Replies View RelatedAll settings are correct as far as i can tell. The wep key works on all my windows boxes. When i have connect automatically enabled it never tries to connect. if I go to edit it it pops kde wallet up i put in credentials. wallet goes away then nothing happens. if i double click connection to my router also nothing happens. I have the wep key in there and i even made it visible to make sure.
View 5 Replies View RelatedHaving a hard time getting NM to detect wireless usb device: Linksys model WUSB600N. Here are a few commands I do know about.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
irda0 no wireless extensions.
[code]....
I am running Ubuntu 9.04 as a partition with windows 7 on a acer aspire 5742, I would like to connect to the internet in Ubuntu, wirelessly, but I am unable to turn my wireless on in Ubuntu, and network manager says "no network connections available". I have the following network adapters:
Atheros AR5B97 Wireless Network Adapter
Broadcom NetLink (TM) Gigabit Ethernet
Microsoft Virtual WiFi Miniport Adapter
I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.
View 7 Replies View RelatedI have 10.04 installed on my HP MiniNote Netbook. If I plug it into the the ethernet directly, all is well, but if I only use the wireless, i get no DNS servers. And one of my wireless networks is on the same router as the wired connection. Also, wireless works just perfectly on my MacBook Air. So, I do not think it is the router. So why am I not getting DNS addresses? How would I set them manually? I can't figure out how to start network manager.
View 2 Replies View RelatedI installed an old laptop with Xubuntu and confirmed the wireless card was working by bringing up a couple of nearby networks owned by my neighbors.
However every time I book the computer, a popup login form comes up for them, which I don't want. How can I delete these from the 'cache'?
I installed lxde on Ubuntu 11.04 but I cannot find any network manager to connect wireless LAN. There are some sort of network manager and they show available signals to connect but cannot find any way to command computer to "connect" it.
View 1 Replies View RelatedI want to set up a static IP on my laptop that connects via wireless to my home network. I have 11.04 installed on my laptop. When I try to use the manual IPv4 setting in the network manager the save option gets greyed out. I tried to edit the /etc/network/interfaces file but all the examples I could find on the net refer to eth0. I tried replacing this with wlan0 but this did not work. I tried installing wicd but I kept getting "Bad Password" errors even though I know the password is correct. A number of people recommended uninstalling network manager to get wicd to work but many other posts said that uninstalling network manager didn't help so I didn't want to go ahead and uninstall unnecessarily. Besides I figure if Ubuntu is distributed with network manager there must be a reason for having it. So what do I do to get a static IP address for the client on a wireless connection?
1. I went to network manager and selected "Connection Information" On the information window I saw the following:
IPv4
IP Address: 192.168.1.6 (This is the item I wanted to change and make static)
Broadcast Address: 192.168.1.255
Subnet Mask: 255.255.255.0
[code].....
2. I went to network manager and selected "Edit Connections"
3. I selected the wireless tab and then the wireless network I wanted to edit
4. I clicked on the edit button and then I clicked on the IPv4 settings tab.
5. I changed method from Automatic (DHCP) to Manual
[code]....
I am using an HP laptop dv8000 series FYI. I started with a fresh install of OS11.2. The first thing I tried was to connect to a network through the gui net manager. This got me nowhere (nothing detected). I then noted that the card was not getting any signal/not functioning. My card is enabled from on the laptop.
I connected my laptop via ethernet and executed this command:
Code:
sudo /usr/sbin/install_bcm43xx_firmware
which returned no errors and seems to have completed successfully.
Using the dmesg | grep firmware command I now get the following:
Code:
SuSE-Laptop:~ # dmesg | grep firmware
[41.246079] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[41.268643] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[41.320790] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[41.369098] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[41.591065] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
SuSE-Laptop:~ #
Now the option to enable wireless in my systray (I know wrong name) has become unselectable. Now what do I do?
I recently installed 11.3, I was able to get my wireless working. However only using the "traditional method with ifup", I could not connect with network manager. I remembered last time I installed 11.2, it was suggested that the wired connection was taking precedence, which was the initial reason I went the traditional route. I changed the wired connection to "on cable connection" and the wireless to "boot time" but still no luck. So are both methods fine and its just a matter of preference, I would prefer to use knetwork manager.
View 2 Replies View RelatedThis is a brand new install of 11.4. While trying to set u p for wireless, when I click on network manager it does not open. Do I need to re-install? I am using a Toshiba Satellite , dual booting with XP. The install was seamless, and picked up all my files from the previous distro. Now the big bugaboo, wireless, but I can't seem to get oout of the starting gate if I can't get to network manager?
View 2 Replies View RelatedTo start off I have a Rosewill rnx-n2x wireless adapter and a Dlink 4500 router. The problem is, the wireless network manager detects every wireless router in the neighborhood, except mine. I see this persons, and this persons, but no "My router Not yours". I even tried doing the hidden network setup and still nothing.
I have read that the rnx n2x isnt supported by linux, although I've seen solutions to make it work (which didn't work, mkdir command kept getting denied during make) link to what I'm talking about: [URL]. What I don't get though, is that if the rnx n2x isnt supported by linux, wouldn't I not be getting my neighbors connections to begin with?
I'm not sure if I have two seperate issues or one inter-related issue. The Network Manager applet wasn't appearing in the tray, found out it wasn't installed. Installed, still didn't appear. Tried installing WiCd, WiCd did appear but couldn't find any networks. I had installed restricted drivers previous, decided it was worth another look. Found that Broadcom STA Wireless Driver wasn't installed. Tried to install, it said it couldn't and said I should review the var/log/jockey which is....excessively long.
View 2 Replies View RelatedI'm trying to search for more wireless networks but i cannot find a way to make network manager search for more wireless networks. It only displays 2 wireless networks and none of them is mine, even though I've got my wireless router at less than 1 meter from my PC.
View 2 Replies View RelatedA couple of weeks ago my laptop's wifi started acting up, to the point that it didn't function. When I click the nwManager icon to being up a list of available networks, it is empty. If I try to create a new network, with the credentials of my modem, it appears to work, and asks for the password. After I enter the password, it seems to work for about 30 seconds (much longer than normal) but then it prompts me again for the password. This cycle continues indefinitely.
I'm running Karmic on a Dell i1525. how to find out what wireless card I have.
I've installed ubuntu 10.04 on a hp mini 110. I've used netbook remix on this same computer and had no problems with a wireless connection. In this case, network manager shows wireless disabled. I have installed the Broadcom B43 Wireless drive from Adminstration->Hardware drivers. No help! ifconfig does not
show eth1 and lspci tells me that the Broadcom BCM4312 Network controller is present.
How do you install network manager in LXDE. I need to choose from a list of available wireless networks.
View 2 Replies View RelatedI have a rtl8192e card and the drivers and everything are set up properly. I can not connect to WEP encrypted networks using network manager. I can however connect using iwconfig and dhcpcd. I uninstalled network manager and installed WICD and have the same problem. It will connect to the access point when it is configured with WPA, but not WEP which we need to use for the other computer. In the status bar of WICD it looks like it is trying to configure the encryption as WPA no matter what I select. I've looked in the config files for WICD and can't see anything that would do it.
View 3 Replies View RelatedI just installed version 11.4 on my system of a toshiba satellite l505d-es5025 64bit.My wlan will not show up at all.I installed ndiswrapper, and all of the wlan from yast.
View 2 Replies View RelatedI use network Manager to connect to wireless broadband on Fedora 12.Are there any tools that can provide me logs about connection times, bandwidth monitoring etc.Basically, I need logs like what kppp provides with accounting.
I can use kppp to connect and get the logs I need but I want to connect to the network as soon as I plug it in - Only Network Manager allows this.
I deleted all APs in my Wireless Section of network manager. After that, the whole network manager icon disappeared. I added the icon back on the panel, but I don't think its the right one. It doesn't do the two green cicles thing when I connect my ethernet wire in. It also doesn't show any wireless AP when I left click on the icon. It doesn't even have an X mark on the bottom left of the icon when no network is detected
View 1 Replies View RelatedI recently upgraded from Ubuntu 9.10 to 10.04 (both 64-bit) and my USB WiFi adapter which previously worked fine stopped working. The adapter is a Hama USB stick based on the Ralink rt73 chipset. I've tried using the Ralink drivers that come with 10.04 (both rt2800usb and rt73usb) but neither work. When I use rt2800usb, the adapter is recognized as interface wlan0, however I can't see any wireless networks. When I use rt73usb (and blacklist rt2800usb to avoid conflicts) I no longer have a wlan0 interface and there is no wireless adapter shown in the network manager. I've pasted in the results of lsmod, lsusb, and ifconfig -a (with MAC addresses removed) below.
[Code]....
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View Related