This is a brand new install of 11.4. While trying to set u p for wireless, when I click on network manager it does not open. Do I need to re-install? I am using a Toshiba Satellite , dual booting with XP. The install was seamless, and picked up all my files from the previous distro. Now the big bugaboo, wireless, but I can't seem to get oout of the starting gate if I can't get to network manager?
View 2 RepliesI mistakenly delete my default panel. How to add the network notifier? Tried to look for the widget but nothing? i need to choose my network connections. And when i look at the Network manager my wireless if black ? It means it didn't detected my wireless?
View 8 Replies View RelatedI recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
View 9 Replies View RelatedWhen I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.
I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.
All settings are correct as far as i can tell. The wep key works on all my windows boxes. When i have connect automatically enabled it never tries to connect. if I go to edit it it pops kde wallet up i put in credentials. wallet goes away then nothing happens. if i double click connection to my router also nothing happens. I have the wep key in there and i even made it visible to make sure.
View 5 Replies View RelatedHaving a hard time getting NM to detect wireless usb device: Linksys model WUSB600N. Here are a few commands I do know about.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
irda0 no wireless extensions.
[code]....
I am using an HP laptop dv8000 series FYI. I started with a fresh install of OS11.2. The first thing I tried was to connect to a network through the gui net manager. This got me nowhere (nothing detected). I then noted that the card was not getting any signal/not functioning. My card is enabled from on the laptop.
I connected my laptop via ethernet and executed this command:
Code:
sudo /usr/sbin/install_bcm43xx_firmware
which returned no errors and seems to have completed successfully.
Using the dmesg | grep firmware command I now get the following:
Code:
SuSE-Laptop:~ # dmesg | grep firmware
[41.246079] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[41.268643] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[41.320790] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[41.369098] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[41.591065] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
SuSE-Laptop:~ #
Now the option to enable wireless in my systray (I know wrong name) has become unselectable. Now what do I do?
I recently installed 11.3, I was able to get my wireless working. However only using the "traditional method with ifup", I could not connect with network manager. I remembered last time I installed 11.2, it was suggested that the wired connection was taking precedence, which was the initial reason I went the traditional route. I changed the wired connection to "on cable connection" and the wireless to "boot time" but still no luck. So are both methods fine and its just a matter of preference, I would prefer to use knetwork manager.
View 2 Replies View RelatedHow do you install network manager in LXDE. I need to choose from a list of available wireless networks.
View 2 Replies View RelatedI have a rtl8192e card and the drivers and everything are set up properly. I can not connect to WEP encrypted networks using network manager. I can however connect using iwconfig and dhcpcd. I uninstalled network manager and installed WICD and have the same problem. It will connect to the access point when it is configured with WPA, but not WEP which we need to use for the other computer. In the status bar of WICD it looks like it is trying to configure the encryption as WPA no matter what I select. I've looked in the config files for WICD and can't see anything that would do it.
View 3 Replies View RelatedI just installed version 11.4 on my system of a toshiba satellite l505d-es5025 64bit.My wlan will not show up at all.I installed ndiswrapper, and all of the wlan from yast.
View 2 Replies View RelatedEvery single time I enter the network manager to edit connections is crashes on exit. I am running opensuse on an Asus eee PC 1000HE with an Atheros network card. The crash report follows :
Distribution: openSUSE 11.2 (i586)
Gnome Release: 2.28.2 (null) (SUSE)
BugBuddy Version: 2.28.0
System: Linux 2.6.31.12-0.2-default #1 SMP 2010-03-16 21:25:39 +0100 i686
[code]....
As an extra point. I wish I could disconnect individual networks instead of just disabling networking to disconnect. I think the newer version of the network manager does this.
I have an Atheros ar5007eg wireless card, and I haven't had problems with this card in GNOME. However, when I made the switch to KDE recently, I can't connect to any wireless networks. A wired connection works fine (that's how I'm writing this), but when I try to connect to any wireless network, it hangs at Acquiring IP Address, then asks me for my WEP key again, I enter it, and the process starts over. I tried using WICD, but I'm not sure if I set it up properly.
View 2 Replies View RelatedInstalled openSUSE 11.3 over an existing 'very stable' 11.2 installation and started experiencing wireless connectivity issues immediately. Network Manager would show connected 100% - 92% but I would lose connectivity to mail, browser and messenger(s). This disconnect would last less than 30 secs but would occur every 2 to 4 minutes.
dmesg reported:
[ 3663.672098] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
[ 3664.101085] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
[ 3664.529050] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
BTW Channel 3 is the channel my wifi is broadcasting on. I've tried other channels and other computers and it is only openSUSE 11.3 having an issue. I am also using WPA2. Modifying the Global Options in Network Settings from User Controlled with NetworkManager to Traditional Method with ifup seemed to stabilize most of the issues, but I do notice occasional drops. I've also switched from Network Manager to wicd to provide some UI while dealing with this issue. Since iwl3945 drivers are now in the kernel I don't know if I should try to revert to an older driver or if there is another issue.
I just installed OpenSuSE 11.3 on an old IBM T20 I had kicking around and I'm using a Proxim Wireless PCMCIA Card (Atheros AR5001X). Since this laptop does not have a DVD drive I installed the system using the Netboot CD and have the SuSE 11.3 ISO on an NFS/SAMBA file server. The issues appeared after the first reboot, the adapter no longer worked. I resorted to using the wired interface to finish the install.
Once the system was up followed the trouble shooting steps outlined in various places and found the ESSID is not being picked up by the ifup scripts. Not sure if it matters but I have ESSID broadcasts turned off on all my WAPs.
The ESSID is in ifcfg-wlan0. To get wireless working I have to manually issue iwconfig wlan0 essid "xxxx"..
Both networkmanager and ifup fail..
I have a minor problem with Knetwork-manager. When I boot up, it won't connect to my wireless router automatically. I have to right-click the taskbar icon, disable wireless, then enable wireless, then it connects fine.It remembers the password fine and once it's connected, it's flawless. It's just the minor issue of having to effectively 'switch the internet on' rather than it just being connected when I turn on my laptop.
I'm using Opensuse 11.2, KDE 4.3.1 (didn't have this issue with 11.1). I've tried the latest Kubuntu (9.10) and knetwork-manager worked flawlessly but I didn't like the rest of the OS so I came back to Opensuse If I restart, suspend or hibernate it usually connects okay, it just seems to be when I boot from 'cold'.
I've tried nm-applet but same problem. I also tried wicd but it didn't really like my system. I've changed my wireless router recently as well with no change, so I don't think it's that. As I say it's a minor problem, it's not really an issue for me to turn it on each time but it would be nice to clear it up. I've googled and searched since 11.2 was released but haven't found any answers and my linux skills are still a bit lacking.
I have configured a squid proxy; it's running, but there was a problem: it does not provide service to client side.
The error was: "could not connect to session manager" "cannot open the network socket"
Our corporate wireless network uses continuously changing passwords with RSA tokens.So every time we need to connect to the wireless we need to enter a new password off the RSA token. For extra fun using the wrong password a couple of times in a row causes the users account to be locked.Network manager automatically stores and reuses the password, with the net result that it is constant getting my account locked.Is there some way to prevent it from storing my password for that network?
View 1 Replies View RelatedI am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
I happened to Fedora 13 that the network manager does not indicate any wifi network and I had to turn off the notebook for a while and then recover, this also happened to me 2 or 3 times on ubuntu 10.04 too. my card is an Atheros AR5007EG.
View 2 Replies View Relatedi looking to replace network manager on my laptop with another wireless program. iv been looking at Swscanner, Rutilt wlan manager, and wicd network manager. iv had trouble with network manager not being able to connect or losing connection fairly easy. im using a gateway m6843 running ubuntu 10.04 32 bit os.
View 2 Replies View RelatedMy wireless is working well enough for me to post this, but does go down from time to time (still troubleshooting the cause.. may be a Cisco Anyconnect VPN client, or Amarok). From time to time the connection will just drop out, and I will have to reboot to get it to reconnect. In these times, dhcpcd eth1 ends up timing out, and if I look at the networkmanager log, that also shows a timeout. wllist scan will show the nearby APs, though, and iwlist will show the card as "connected" to an ap (ssid and all), but no pings will work and dhcpcd will continue to say it times out.Anyhow, I noticed that most of the time when I do a scan in Knetworkmanager, the attached screen appears - I am concerned, because I know that these are open APs, and also that it is showing quite a few too many. If I completely wipe Knetworkmanager and reinstall, are there any gotchas that might be worth knowing about?
View 5 Replies View RelatedI recently made an Ubuntu 8.10 partition on my windows XP Latitude E5400. Using windows xp I can connect to my dlink wireless network that is not protected. Using Ubuntu 8.10 I can connect to my neighbours wireless non-protected network, however my own dlink network is not shown in network manager and I can not connect to it?
View 1 Replies View RelatedWhen i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedI am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.
View 8 Replies View RelatedHow do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View RelatedI am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.
View 9 Replies View RelatedI tried to install suse 11.4 on the new gnome desktop 3. everything seems to work except the network manager. Is not present in the bar and I can not restore it. tried to reinstall network manager but to no avail.Does anyone know how I could solve this problem
View 1 Replies View RelatedI am using opensuse 11.3 64 Bit Gnome. The problem is the network manager & the bluetooth icon takes unnecessarily long time to load (2-3mins) & until it loads I cannot connect to the internet.
View 1 Replies View Related