Ubuntu :: Wifi Card Is Unusable After Reboot?
Nov 8, 2010
my bcm 4312 wifi card gets disabled after each reboot, now that ive installed compat-wireless patched for mac 80211 frag attack... in order to get my wifi card fired up again i have to browse tom my compat-wireless source folder in /home/user/Downloads/compat-wireless and issue the commands sudo make wlunload and then reload my wifi driver via sudo modprobe b43. is there any way to fix this problem? or furhter troubleshoot here is what dmesg says on boot:
Code:
[ 22.425475] b43: disagrees about version of symbol ssb_device_is_enabled
[ 22.425481] b43: Unknown symbol ssb_device_is_enabled (err -22)
[ 22.432766] b43: disagrees about version of symbol ssb_pmu_set_ldo_paref
[code]...
View 1 Replies
ADVERTISEMENT
Sep 7, 2009
When I log in to linx and connect to my University's public wifi, it disconnects or if it stays connected, I cannot ping anything or load any webpages. But when loggod in to windows I can write this message now. Signal strength is 28% Can anything be done to still use wifi in linux and not have to log in to windows?
View 3 Replies
View Related
Apr 3, 2011
I'm using a Gateway LT3103u running a dual boot of Win 7 and Ubuntu 10.10 (separate partitions) and ever since I've started using Ubuntu (last October) I've had persistent graphic card problems.
My graphics card is the ATI Radeon X1270.
Right now I can't use any visual effects because of I do the screen spazzes out and becomes unusable. This isn't a big deal for me since I don't use them but I figured it's relevant to the problem.
Even with visual effects off I still have problems and at times parts of the menu will stay on the screen in a little box which covers any windows that open beneath it. The only way to get rid of it is to turn visual effects on so the screen resets then hit use previous settings.
View 1 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Mar 14, 2011
As a part of my final project,i am beginner and this is the first one that i have the opportunity to work under linux fedora,my task consist to develop with C a driver of wifi by using the SDIO Wifi card as an interface. This driver will be included in a digital receiver TV.
View 2 Replies
View Related
Nov 19, 2010
I recently bought a second monitor and I had this set up perfectly fine with two panels on my primary display and one on my secondary. I've now gone away for the weekend (leaving the monitor) and I went to turn on my laptop and it didn't work.
When I login to a gnome session (or indeed a failsafe gnome session) I just got two horizontal white bars (where the panels would be). I switch to a terminal, login and run top and see that gnome-panel is on 100%. Running 'killall gnome-panel' does nothing (tried a few times).
I've had to install xfce4 just to type this message. Is there any way I can 'reset' gnome-panel or any other fix? Or even a workaround would be nice. I'm on 9.10 by the way. I am going to upgrade at some point but its not really an option yet.
View 3 Replies
View Related
Jun 6, 2010
After serveral reboots without problems. My Xubuntu 10.04 LTS now asks for my wifi security keyat every boot. Somehow It looses it.
View 1 Replies
View Related
May 31, 2010
I have just removed ndiswrapper and installed Realtek RTL819se!! How ever after I restarted I lose my wifi and have to do change directory to use ./wlan0up to get it working again.
View 1 Replies
View Related
May 12, 2011
I have a Compaq Presario M2000 with a Broadcom BCM4306 wifi card with Ubuntu 11.04
I did the following commands and the wifi works perfect, but after reboot I have to run the commands again?
Code:
~$ sudo apt-get install b43-fwcutter
Code:
~$ sudo apt-get install b43-fwcutter firmware-b43-installer
[Code].....
View 4 Replies
View Related
Jul 27, 2011
I turned down my txpower with the command: sudo iwconfig wlan0 txpower 3 Which works to fine turn down my broadcast power from the default value of 15 dBm to 3 dBm. But it is reset every time I restart Ubuntu 11.04 to the default value of 15 dBm. How do I save my modified txpower settings so they don't reset after a restart? It is really annoying having to re-enter the command every time I reboot my computer!
View 2 Replies
View Related
Dec 25, 2010
I ran yum broadcom-wl and installed the driver for my card no problem. I connected to the internet just fine using my wifi thereafter.
When I shut my laptop down and booted sometime later, the wireless connection was gone and I didn't even see a wireless adapter in the networking applet.
I tried to run insmod wl and insmod wl.ko and that failed.
So... after using yum to install the broadcom drivers, how can I make that install 'permanent'; so I don't lose my wireless adapter each time I reboot?
View 2 Replies
View Related
Jul 8, 2010
After having my usb wifi adapters working fine for some time, they stopped working and I can not get network connectivity.
Some one else was using my box and they reported seeing a kernel panic and then rebooted the box. Now there is no connectivity through the wifi interfaces.
I have seen the kernel panics related to this driver before, but usually a reboot has no ill effect.
Code:
root@Algalon:~# iwconfig wlan0
wlan0 RTxx70 Wireless ESSID:"a800" Nickname:"RT3070STA"
Mode:Managed Frequency=2.412 GHz Access Point: 00:0B:86:9A:08:80
Bit Rate=54 Mb/s
[Code].....
View 3 Replies
View Related
Feb 18, 2010
I have to reboot every time I put a different sd card in.After I take the first one out the built in reader in my Dell monitor sdf1 still has those first photos in it no matter how many other cards I put in.
View 1 Replies
View Related
Jul 13, 2010
I'm sure you've seen this question before -- I tried searching but I can't find a clear answer. All I need is to get my wifi up and running in Ubuntu 10.04. I'm currently double-booted with XP on a Dell Latitude E5400 laptop. I'm in Windows right now. I can't post my lpsci readout because I can't access the internet from Ubuntu -- no access to wired connection.
I worked on this problem for a long time last night and fixed it somehow by installing a driver program -- it had "cutter" in the name. Today, however, I try to log in and Ubuntu won't connect to an open wifi point. Boot #1 it recognized it but wouldn't connect. Boot #2 it wouldn't recognize it at all (said "wireless is disabled" even though it wasn't. Boot #3 it would recognize the wifi point but wouldn't connect.) I can mantain a constant connection to this wifi in Windows XP and also on my Android phone.
I just want someone to please tell me how to get my wifi working reliably. I'm excited to switch over to Ubuntu, all I need is for the wifi to work. My wifi card is a Broadcom 43xx (4312?). Something like that.
View 10 Replies
View Related
Feb 17, 2011
It found it in 10.04 on its own, in 10.10 will it do the same?
something went wrong with my upgrade I'm running in safe graphics mode even though I'm in my regular desktop session.
View 1 Replies
View Related
Jan 22, 2010
Ubuntu 9.04 running on a Dell C640 with a Dell TrueMobile 1150 wireless card. Works perfectly under XP. Ubuntu can't find it. Wired networking finds the internet perfectly (though I'm still working on getting samba set up correctly for file/print sharing on my XP LAN).
I'm thinking I need a driver, maybe? Can't seem to locate one.
View 9 Replies
View Related
Apr 14, 2010
For the first time, after hibernating, I was unable to use the wifi card. I had to reboot again. These are the ouputs of common commands after bringing networking down, up and down again:.
[Code]....
View 4 Replies
View Related
Jul 13, 2010
i just thought the last few days about trying Ubuntu. so i did. i got a nice and fresh copy of Ubuntu Desktop version and installed it, everything worked great except my wireless usb 2.0 card. the only internet connection i have under windows is Wifi and i hoped that my dongle will be recognized by Ubuntu automatically...(naturally, it wasn't the case.)
so my adapter looks exactly like this one here, except for the color, it's white and it has my WISP's name written on it (i got it from them, along with a cd that offers win xp/98/me drivers...)
so even everest sees it's atheros and it's the Atheros AR5523 chipset.
i also have windows 7 64bit drivers if they help...
anyway, i can't get it to work and cannot access the internet any other way when on Ubuntu, so i have to use an already-saved driver..
View 3 Replies
View Related
Dec 19, 2010
i installed Ubuntu 10.10 on my desktop computer, the live cd worked fine. my wifi worked there. but after installation completion i didnt get any screen. all black. nothing after the grub menu. i dettached my TP-Link TL-WN353G wireless PCI card and it worked fine. now what to do?strange, the wifi card works fine on Ubuntu Live CD and on win XP. please guidei have tried deleting quite and splash during boot upduring boot i pressed 'e' and deleted quite and splash and then ctrl-X but still the same result. the screen goes black. no graphics after grub menu.
View 2 Replies
View Related
Feb 17, 2016
A couple of days ago I asked why my pc changes the wireless card name.It switches between AR9285 ( right) and AR5008 ( wrong). Well, it is not the case. When system identified with AR9285,it loads ath9k and I can connect to the router. When system identifies my card as AR5008, no kernel module is present at all ( lspci -k). The wrong card name occurs only when system rebooted. If I gracefully shut down the system, it always comes up with a right name for the card( AR9285). So, how to force the system identify my card right no matter if I reboot or shut down?
View 1 Replies
View Related
Jan 17, 2010
i was wondering how to get the above wifi card working as it is not supported.
View 1 Replies
View Related
Feb 16, 2010
I have downloaded the driver installed it, and it works fine. But i can't get to turn it off. I do have the ability to unload the driver's kernel modules and the sysyem does not see my card after that. That's ok, but i'm thinking it still uses my battery power. The wifi led is always on no matter what i do. The fn+<wifi key> doesn't to anything.
View 8 Replies
View Related
May 1, 2010
I'm having a problem with my wifi card: it is not detected by the network manager. I have tried going to the Hardware Drivers utility, but it doesn't find any proprietary hardware.I really am at a loss as to how to make Lucid "start over" with the wifi detection.I have installed Lucid using an existing /home, which was under 8.10. Maybe i just need to wipe out some configuration files to start afresh?
View 9 Replies
View Related
May 15, 2010
i installed ubuntu on my friends laptop but when he tries to connect to his network and enters his wep key the box disappears for a few second and comes back again...The card is Atheros on a Toshiba laptop and it is detected , it finds the networks but the wep key is rejected every time without a error
View 5 Replies
View Related
May 31, 2010
I've just installed Ubuntu 10.04 on my old X30 alongside my fully working 8.04 and have strange wifi problems under 10.04 (under 8.04 it worked out of the box):
- no available networks are shown
- running "sudo iwlist scanning" results in "eth1
Interface doesn't support scanning : Device or resource busy"
- without any wireless configuration from my side I get this:
sudo iwconfig eth1
eth1 IEEE 802.11b ESSID:"gxC6isQxFFJxEC)xCDxBAxAB
xF2xFBxE3F|xC2TxF8x1BxE8xE7x8DvZ.c3x9FxC 9x9A"
Mode:Managed Frequency:2.467 GHz Access Point: None
Bit Rate:11 Mb/s Sensitivity:1/0
Retry short limit:8 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=90/70 Signal level=-8 dBm Noise level=-147 dBm
Rx invalid nwid:0 Rx invalid crypt:63 Rx invalid frag:0
Tx excessive retries:1 Invalid misc:0 Missed beacon:0
A very strange ESSID there appearing out of nowhere...
View 9 Replies
View Related
Aug 27, 2010
This is the issue, and I have had this happen with a few card readers. I have a Alfa Usb Wifi adapter model number AWUS036H using the rtl8187 Chipset. It works fine, unless I plug in my flash card reader directly to the board. If I plug it in to a hub it works fine until I put a card in, I was also having the same issues using a USB Video Capture unit by the name of EASYCAP. This was also happening in XP. Must be some driver conflict of sorts.
View 1 Replies
View Related
Sep 7, 2010
Is there a way to see the manufacture of wifi router/card remotely like "inSSider" shows, for example ???
View 2 Replies
View Related
Sep 8, 2010
Im looking for a pci wifi card for my media pc, I would prefer wired, but we are moving soon , so i dont want to take the time to run a wire through the house. Im looking for one that will work out of the box with Ubuntu.
View 1 Replies
View Related
