Ubuntu :: Using Default VPN Tools / VPN Connection Failed

Sep 16, 2010

I'm trying to connect to my universities VPN, but I keep getting the error "VPN Connection Failed", which isn't very helpful. These instructions assume I'm using the Cisco VPN client on Windows, but surely vpnc on Ubuntu is very similar? (if not the same) I'm on 10.04 lucid, btw.Anyway, if there isn't something I can use to debug the problem, could someone suggest what settings I enter into the form?

View 2 Replies


ADVERTISEMENT

General :: Need Info On Default Tools Used By Distributions?

Dec 19, 2010

What are the default tools used by most distributions? This includes, embedded distros, BSD's systems, Unix-like...I'm asking this because nowadays distributions come with more and more software. But as far as I know "binutils", "bash", "grep", "ed" and "awk" are standards. What are the standards utilities to start learning that are most cross-platform [i.e.: the "shells", "services", "editors" and others].

View 8 Replies View Related

Ubuntu / Apple :: Failed To Install ISight Firmware Tools

May 9, 2010

Once I download and install isight-firmware-tools. I am supposed to redirect it somewhere. I tried keeping the default thing set, but it failed to install that way.
(MacBook 3,1. 10.04 LTS)

View 2 Replies View Related

Ubuntu Multimedia :: PulseAudio Volume Control - Connection Failed:Connection Refused

Jul 4, 2010

I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.

I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.

[Code]....

View 9 Replies View Related

OpenSUSE Hardware :: Setup Multipath With Failover Policy On 11 - Connection Failed Over To Second HBA Connection To SAN

Aug 13, 2009

I am trying to setup multipath with failover policy on openSuSE 11. I have two qla2xxx HBA's installed and they appear to be working. Here is the output of "multipath -l" command

[Code]....

While testing, I pulled one of the two connection to SAN, and the connection failed over to second HBA connection to SAN. When I plug the cable back in, it does not fall back to original connection... It stays in failed state. Also, I noticed that failed disk (sdd disk) comes back as (sdg disk), which is probably why connection does not fall back to original HBA. But, when I run "/sbin/service multipathd restart" sdg disk shows as as enabled in multipath -l...

View 9 Replies View Related

Hardware :: Error - Saving Connection Failed 0 Can't Write Connection Type 'cdma'

May 21, 2011

I got an error while working with NetworkManager in new RHEL6/ Fedora14. I have a ZTE AC 2726 3G wireless modem. i had tried to connect it via NetworkManager . It only requires username and password to connect but the thing is that after putting all the credentials i had checked the option" available to all the user "and while i was trying to save the profile it shows the following error saving connection failed 0 can't write connection type 'cdma'I had google so many times around this error but no better solution is there .

View 1 Replies View Related

Server :: Vsftpd Not Working: Connection Attempt Failed With "ECONNREFUSED - Connection Refused?

Apr 28, 2010

vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".

View 7 Replies View Related

Ubuntu Networking :: The Vpn Connection "vpn Connection1" Failed Because The Service Failed To Start

Dec 12, 2010

I got this error for two days.back then I googled this error and i got some information about log file in /var/log/syslog but i couldn't find it in google at all. this is all i got from syslog . look at the red paragraph

[Code]....

View 1 Replies View Related

Ubuntu :: When Writing A Script Using Command-line Tools Why Is It More Difficult Using Graphical Tools

Apr 16, 2010

When writing a script using command-line tools why is it more difficult using graphical tools?

View 3 Replies View Related

Software :: Install The OE Tools - Angstrom Distribution Tools In My Ubuntu

Sep 2, 2010

I need to install the scripts of angstrom distribution

ie ARM gcc..................how to install the scrpits from the site [url]

View 1 Replies View Related

OpenSUSE :: Failed To Download ./i586/libcodeblocks0-r6185-1.1.i586.rpm From Index Of /repositories/devel:/tools:/ide/_11.2?

Mar 2, 2010

when i try to install any program i always have this type of erreur messagehow to solve that ?

chec du tchargement :
Failed to download ./i586/libcodeblocks0-r6185-1.1.i586.rpm from Index of /repositories/devel:/tools:/ide/openSUSE_11.2

[code]....

View 9 Replies View Related

Debian :: Xen-tools Shows Conffiles - When Do Dpkg -s Xen-tools Is It An Error

Apr 8, 2010

I checked xen-tools on a Debian Lenny system

Got following

Code:

This package contains tools to manage Debian based XEN virtual servers.

Using the scripts you can easily create fully configured Xen guest domains (domU) which can be listed, updated, or copied easily.

Homepage: [url] in the above output I am getting a line Conffiles and then you can see a series of /etc what are that and is it an error or some conflict?

View 2 Replies View Related

Ubuntu :: Failed To Boot Default Entries

Feb 7, 2010

when i turn on my computer it says: error : no such device : a77318a7-5f3d-4531-8d27-370f2b43c0e2.Failed to boot default entries

View 9 Replies View Related

Ubuntu :: Trying To Change Default Shell And Failed?

Jun 9, 2011

i'm pretty new to ubuntu. I was "playing" trying to change my default shell and failed. Now, after logging in, i open a terminal window and type "su". Ubuntu asks me a password, i give my password and i get this error "unable to execture /bin/bsd-csh: file or directory does not exist". Any idea on how to solve this problem restoring my old shell.

View 2 Replies View Related

Ubuntu :: Failed To Boot Both Default And Fallback Entries

Oct 22, 2010

I just installed a fresh copy of 10.10 - i used the erase entire disk and use for 10.10 option after having earlier troubles of the same booting into 10.10 after installing it over the old / partition. it says:

error: couldn't read file.
error: you need to load the kernel first.

Failed to boot both default and fallback entries.One partition, of 10.10 and no idea where to go...

View 2 Replies View Related

Ubuntu :: Default Image Viewer Failed But GIMP Fine

Mar 19, 2011

The default image viewer in 10.10 (eog) has met its match, a ~500MB image of the moon. I just thought it was kind of funny, while browsing the software center for an image viewer that could handle it, I noticed the description of the one installed by default and thought it was kind of funny, so I snapped this screenshot and thought I'd share it with you guys. By the way I have 4 GB of RAM and can view the image just fine in GIMP, just thought this was kind of funny.
Screenshot

View 1 Replies View Related

Ubuntu Installation :: Xrandr: Failed To Get Size Of Gamma For Output Default

Apr 30, 2011

i tried updating ubuntu from 10.10 to 11.04. It didn't work out, i got just a black screen trying to load new ubuntu. Nevermind, after multiple tries to recover it i simply installed ubuntu 11.04 over it. It works fine now, but i already got some problems Mainly, i can't find a way to pick the appropriate resolution. I have a 19" monitor with 1280x1024 resolution, video card is nvidia 8500gt. Any GUI tool (nvidia driver settings or 'monitors' tool) doesn't allow me to pick what i want. xorg.cong is nearly empty, that's all what i have there

Quote:

Section "Device"
Identifier "Default Device"
Option "NoLogo" "True"
EndSection

I did some google searches and found out about Xrandr (i'm not much a techy really). That's what i get running xrandr in the terminal

Quote:

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm

[code]....

View 7 Replies View Related

Ubuntu Networking :: VPN Connection Failed ?

Nov 16, 2010

I'm trying to get VPN working so that I can browse "from the UK". I got myself a free one hour trial but it's no good, because I can't get it to work!

I added the network using the network manager. I put 'uk.hideipvpn.com' in "gateway". I left "NT domain" blank as I didn't know what it meant.

It says "The VPN connection 'VPN connection 1' failed. I found the following at /var/log/messages:

Code:

View 5 Replies View Related

Ubuntu :: Emu 1616 And ALSA - Function Snd_ctl_open Failed For Default: No Such Device Or Address

Feb 25, 2010

I'm running 9.10. I was installing ALSA so that I could run my EMU 1616, and when I tried to go through the steps to install, I'm running into two errors that I've noticed so far. I think. Anyway, the first is that is states that the panelw library isn't there, and that alsamixer: function snd_ctl_open failed for default: No such device or address. The alsamixer one is really odd, since it's there, but I don't know why it won't run.

I initially had it running, and now it isn't. I've yet to get sound out of my EMU. the terminal window also tells me that it can't find the snd_emu file, even though it exists on the computer as well. I need an answer for a dummy.

View 5 Replies View Related

Ubuntu :: Default Gateway For Internet Connection

Jul 11, 2009

I have installed eeebuntu NBR on my laptop and it looks great on a 17 inch widescreen. It looks so different from the usual interface that I get people ask about it and I can evangalise without being considered a boring weirdo! Anyway, I have one problem. Every time I boot I have to run the following command.
Code: sudo /sbin/route add default gateway 192.168.0.1
How do I get this to happen automatically (as it normally does)?

View 3 Replies View Related

Ubuntu Networking :: PPTP VPN Connection Is Failed After A While?

Mar 12, 2010

I setup a PPTP VPN connection in ubuntu 9.10 (x86_64) using NetworkManager. After enabling the VPN connection, I can browse web pages (it's perfect) but after a while the vpn connection is terminated! The following is my syslog after connecting and terminating:

Code:
Mar 12 22:10:10 amir-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Mar 12 22:10:10 amir-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 2204

[Code]....

View 7 Replies View Related

Ubuntu Networking :: Failed To Setup Net Connection In 9.10?

Jun 18, 2010

I recently setup ubuntu 9.10 in my desktop..I don't know whether the connection is dialup or not. I used the connection with cable connection. I have got the following information from my ISP:

User name: n372_asad_go@brisksys.net
service name: brisknb
password: 16251521

View 1 Replies View Related

Ubuntu Servers :: Apt-get Update Connection Failed?

Dec 9, 2010

I am trying to update my server, but it won't do it. It tries to connect, but says "Waiting for headers". If i try to install other packages it says "Connection failed". Apparently it has Internet connection since my server shares Internet connection with other machines.

View 9 Replies View Related

Ubuntu Servers :: Apt Get Update Connection Failed

Mar 22, 2011

I am using Ubuntu Server 10.10 64bit. While executing apt-get update i am getting error Connection failed. I have checked other post also some where i found to change the country name 'us' to other present in repository url inside /etc/apt/sources.list file. I tryied with country 'de' and 'in' but then also got the same error. I am getting following error

[code]...

View 8 Replies View Related

Ubuntu Networking :: 11.04 Wired Connection Failed?

May 4, 2011

A while ago i attempted to use ubuntu as my default operating system and it failed, i could not get the shares to work properly and i gave up. Yes i know, may be i should have kept going.

Any way, my problem is, Im attempting to use ubuntu 11.04 now, and this time i am realy keen on going through with this, however... for some reason when i connect my wired connection cable ubuntu keeps failing to connect. this is with the auto eth0.

Can any one help me with this problem? This is one of the major things that i will need to do if i want to switch over to ubuntu.

View 1 Replies View Related

Ubuntu :: Apache2 SSL Setup - Secure Connection Failed

Mar 23, 2010

I followed the tutorial found here [URL] but when I try to access [URL] I get the following:
Code:
Secure Connection Failed
An error occurred during a connection to www.mydomain.com.
SSL received a record that exceeded the maximum permissible length.
(Error code: ssl_error_rx_record_too_long)
Not sure what I might have done wrong... I have retraced all of my steps and I don't believe I missed anything.

View 2 Replies View Related

Ubuntu Networking :: Connection Failed: Unable To Get IP Address

Apr 24, 2010

So I got Ubuntu 9.10 on my laptop working really neat and wanted to upgrade my desktop to 9.10 as well. So I reinstalled Ubuntu there and now I can't connect to my network anymore....

I have a usb wireless adapter (currently Sitecom as I bought a new one today to hopefully fix it, but ended up at exactly the same problem as with my old adapter). The network manager I'm using now is Wicd since some topics I was looking through were about malfunctioning GNOME network-manager (which I removed) and suggested to try this. The GNOME network-manager kept prompting to insert my WEP network key which was a correct one. When I removed all security from the network it didn't prompt anything anymore but just failed to connect. The Wicd network manager is so nice to tell me that it cannot obtain the IP address however, so I suspect that this is my main issue... but I have no idea what I can do about this? Tried using a static IP and then I get the message "Connection failed: Could not contact the wireless access point."

I feel powerless as my knowledge here is just lacking..

View 4 Replies View Related

Ubuntu Networking :: Router Too Far Away - Failed To Establish Connection

May 3, 2010

Dual boot Vista Basic and Ubuntu 10.04 on low spec PC. I can connect to the wireless when I am next to it. I move to the room where the computer is normally used and I lose connection. I can still see it but it fails to establish a connection. Okay, sounds like it's just too far way but when I re-boot and use Vista, it works fine (1 or 2 bars, but it works). Is this a driver issue? Anything I can do apart from move my wireless router?

View 9 Replies View Related

Ubuntu Installation :: Skype Cannot Connect P2p Connection Failed?

Dec 23, 2010

I am using ubuntu 10.10. I am planning a skype meeting this morning. I have just installed skype 2.1 beta when I tried to sign in I get takes long time and at the end I get p2p connection failed. can there be some other applications that use are using skype port ? if so how can I detect this ?

View 3 Replies View Related

Ubuntu Networking :: Mobile Broadband Connection Failed Under 11.04?

May 30, 2011

I use Nokia N900 under T-Mobile as a broadband modem. It is connected via USB. There was no connection problems under 10.04 or 10.10. Now I have installed Ubuntu 11.04, and I cannot connect any more.

Here are the log messages that I get when trying to connect:

Code:
May 30 14:32:06 ubuntu-sager NetworkManager[759]: <info> Activation (ttyACM0) starting connection 'T-Mobile Internet'
May 30 14:32:06 ubuntu-sager NetworkManager[759]: <info> (ttyACM0): device state change: 3 -> 4 (reason 0)

[Code]....

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved